=====================  Product Identification  =====================

MSDS NAME:ATOMIZED ALUMINUM POWDER,ALCAN 101 OR 105
NIIN:00-628-3385
MSDS Number: BFJMF
=== Responsible Party ===
Company:ALCAN-TOYO AMERICA,INC.(OLD NAME:ALCAN ALUMINUM CO
Address:CATON FARM ROAD AND ROUTE 53
Box:920
City:JOLIET
State:IL
ZIP:60434
Country:US
Emergency Phone Num:(815) 727-5555
CAGE:76424
=== Contractor Identification ===
Company:ALCAN-TOYO AMERICA INC AFFIL OF ALCON ALUMINUM CORP
Address:1717 N NAPER BLVD SUITE 201
Box:City:NAPERVILLE
State:IL
ZIP:60540
Country:US
Phone:708-505-2160
CAGE:76424

=============  Composition/Information on Ingredients  =============

Name:ALUMINUM  (SARA III)
CAS:7429-90-5
RTECS #:BD0330000
Fraction by Wt: 100.0%
OSHA PEL:15MG/M3 DUST/5 FUME
ACGIH TLV:10MG/M3 DUST; 9192

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:DUST MAY CAUSE RESPIRATORY TRACT
    IRRITATION.
Effects of Overexposure:INHALATION:HIGH CONCENTRATION CAN CAUSE
    RESPIRATORY TRACT IRRITATION;EYES:DUST MAY CAUSE
    IRRITATION;SKIN:REPEATED AND PROLONGED CONTACT MAY CAUSE SLIGHT
    IRRITATION;INGESTION:NEGLIGIBLE EFFECTS.
Medical Cond Aggravated by Exposure:PRE-EXISTING UPPER RESPIRATORY AND
    LUNG DISEASE SUCH AS,BUT NOT LIMITED TO,BRONCHITIS,EMPHYSEMA AND
    ASTHMA.

=======================  First Aid Measures  =======================

First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
    NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE MOUTH;
    GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR OTHER
    SYMPTOMS OF OVEREXPOSURE.

=====================  Fire Fighting Measures  =====================

Flash Point:NONE
Extinguishing Media:USE CLASS "D" DRY CHEMICAL EXTINGUISHING AGENTS
    SUCH AS DRY SAND; DO NOT USE WATER OF HALOGENATED AGENT AS
    EXTINGUISHER.
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS IN
    PRESSURE DEMAND MODE;GENTLY COVER THE BURNING POWDER WITH
    EXTINGUISHER(DO NOT MIX WITH POWDER).PREVENT DUST FORMATION.
Unusual Fire/Explosion Hazard:WATER & BURNING ALUMINUM POWDER REACT
    VIOLENTLY FORMING HYDROGEN & ALUMINUM OXIDE.ALUMINUM DUST MAY BE
    IGNITED BY STATIC DISCHARGE.DUST IN AIR MAY BE EXPLOSION.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL IGNITION SOURCES.USE NON-SPARKING
    TOOLS(SHOVELS).WEAR APPROPRIATE PROTECTIVE EQUIPMENTS.TRANSFER
    SPILLED MATERIAL TO A LEAK PROOF CONTAINER FOR HAZARDOUS WASTE
    DISPOSAL.IF VACUUM CLEANER IS  USED,IT SHOULD BE GROUNDED TO
    PREVENT STATIC.

======================	Handling and Storage  ======================

Handling and Storage Precautions:USE NON-SPARKING HANDLING
    EQUIPMENT.COVER AND RESEAL PARTIALLY EMPTY CONTAINERS.KEEP
    COMPLETELY DRY.STORAGE AREA MUST BE OF FIRE RESISTANT CONSTRUCTN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE SUPPLIED AIR RESPIRATORY PROTECTION IN
    CONFINED OR ENCLOSED SPACES IF NEEDED.
Ventilation:LOCAL EXHAUST,EXPLOSION PROOF,MINIMUM FACE VELOCITY 60
    FPM.NO SMOKING OR OPEN LIGHT IN WORK AREA.
Protective Gloves:USE CHEMICAL RESISTANT GLOVES & APRON
Eye Protection:CHEMICAL GOGGLES OR FACE SPLASH SHIELD
Supplemental Safety and Health
MFR STATED THAT THE POWDER IS ATOMIZED & UNCOATED,SPHERICAL OR
    IRREGULAR SHAPE;THE MSDS SHOWING "X" BEFORE THE P/N IS STRICTLY FOR
    SPHERICAL POWDER COVERED BY MIL-A-23950 & MIL-A-82728.THE MSDS
    SHOWIN G STRAIGHT NO IS FOR IRREGULAR SHAPED PARTICLES POWDER FOR
    MIL-A-512;THIS ENTRY IS FOR P/N:ALCAN 101;REF:DGSC-SLM 87252H

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:B.P. Text:4472F/2467C
Melt/Freeze Pt:M.P/F.P Text:1220F/660C
Spec Gravity:2.70
Solubility in Water:NEGLIGIBLE
Appearance and Odor:DULL GRAY TO METALLIC SILVER APPEARANCE,NO ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
WATER,HALOGENATED HYDROCARBONS,MINERAL ACIDS,ALKALIS AND STRONG
    OXIDIZING MATERIALS.
Stability Condition to Avoid:IMPROPER STORAGE WHICH WOULD ALLOW
    INTRODUCTION OF WATER/MOISTURE,HEAT,SPARKS & FOREIGN MATERIAL.
Hazardous Decomposition Products:ALUMINUM WHEN REACTS WITH WATER,ACIDS
    OR ALKALIS,IT FORMS COMBUSTIBLE HYDROGEN GAS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:FOR DISPOSAL OF THIS MATERIAL AS A WASTE,ACT IN
    ACCORDANCE WITH ALL APPLICABLE FEDERAL,STATE & LOCAL WASTE
    MANAGEMENT REGULATIONS.MFR RECOMMENDS TO DISPOSE IN APPROVED
    HAZARDOUS WASTE LANDFILL.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***