===================== Product Identification =====================
MSDS NAME:INNERBOND 2010 FLUID, 50 CST.
NIIN:00-664-0048
MSDS Number: BFKHN
=== Responsible Party ===
Company:INLAND PACKAGING, INC.
Address:RT 4
Box:644
City:ELIZABETHTOWN
State:KY
ZIP:42701
Country:US
Info Phone Num:502-737-6757
Emergency Phone Num:502-737-6757
Preparer's Name:MORTON FIELD
CAGE:66172
=== Contractor Identification ===
Company:INLAND PACKAGING INC
Address:209 PETERSON DR
Box:644
City:ELIZABETHTOWN
State:KY
ZIP:42701-9804
Country:US
Phone:502-737-6757
CAGE:66172
============= Composition/Information on Ingredients =============
Name:POLYDIMETHYLSILOXANE
CAS:9016-00-6
RTECS #:TQ2690000
===================== Hazards Identification =====================
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PRODUCT IS A VERY MILD IRRITANT AND
NEARLY NON TOXIC.
Effects of Overexposure:INGEST: VERY LOW TOXICITY. EYE: CAUSES MILD
TRANSIENT DISCOMFORT SIMILAR TO WINDBURN. SKIN: NON-IRRITATING TO
INTACT OR ABRADED SKIN. INHALE: NOT LIKELY TO INHALE.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
Eyes: FLUSH THOROUGHLY WITH LARGE VOLUMES OF WATER. SEEK
MEDICAL ASSISTANCE IF NECESSARY. SKIN: WASH WITH SOAP AND A LARGE
VOLUME OF WATER. INHALE: NOT LIKELY TO INHALE. SEEK MEDICAL
ATTENTION IF INHA LED. INGEST: INDUCE VOMITING. SEEK MEDICAL
ASSISTANCE IF NECESSARY.
===================== Fire Fighting Measures =====================
Flash Point:570F,299C,TCC
Extinguishing Media:CO*2, FOAM, DRY CHEM & H*2O FOG.
Fire Fighting Procedures:WEAR SELF-CNTND BRTHG APP
Unusual Fire/Explosion Hazard:NONE
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE IGNITION SOURCES,VENTILATE AREA
WELL.ABSORB WITH VERMICULITE OR OTHER MATERIALS, SUCH AS
SAWDUST,RAGS,PAPER & PLACE IN CLOSED CONTAINER. USE NON SPARKING
TOOLS. WEAR PROPER PROTECTIVE EQUIPMENT DURING CLEAN UP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN COOL,DRY WELL VENTED LOW FIRE
RISK AREA. PROTECT FROM HEAT,SHOCK,FRICTION. KEEP CONTAINERS
CLOSED.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NONE REQD IN NORMAL USE
Ventilation:LOCAL EXHAUST TO MAINTN BELOW TLV.
Protective Gloves:AS REQUIRED
Eye Protection:GOGGLES
Other Protective Equipment:NONE
Work Hygienic Practices:USE NORMAL GOOD INDUSTRIAL HYGENE
PRACTICE.MINIMIZE CONTACT.
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
HCC:V6
Vapor Pres:<1
Spec Gravity:0.96
Viscosity:50 CST
Solubility in Water:INSOL
Appearance and Odor:PASTE-LIKE POLYMER-CLEAR,COLORLESS.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
MINERAL ACIDS,STRONG BASES
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:OXIDES OF CARBON AND SILICA MAY BE
EMITTED ON COMBUSTION.
==================== Disposal Considerations ====================
Waste Disposal Methods:KEEP IN COVERED DRUMS,PENDING DISPOSAL. HANDLE &
DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
INTERNATIONAL,FEDERAL,STATE, & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|