===================== Product Identification =====================
MSDS NAME:METHYLCHLOROFORM,INHIBITED
NIIN:00-664-0387
MSDS Number: BFKJT
=== Responsible Party ===
Company:AMERICAN WRITING INK CO.,INC.
Emergency Phone Num:617 482-9167
CAGE:82956
=== Contractor Identification ===
Company:AMERICAN INK AND OIL CORP
Address:33 ENDICOTT STREET
Box:City:NORWOOD
State:MA
ZIP:02062-3006
Country:US
Phone:781-762-0026 / FAX: 781-762-1617
CAGE:82956
============= Composition/Information on Ingredients =============
Name:SOLVENTS
Fraction by Wt: 94.5%
Name:ADDITIVES
Fraction by Wt: 3.5%
===================== Hazards Identification =====================
Effects of Overexposure:SKIN,EYE IRRITANT,CARDIAC IRRITABILITY
======================= First Aid Measures =======================
First Aid:SKIN,EYE CONTACT:FLUSH WITH PLENTY OF WATER.INHALATION:REMOVE
TO FRESH AIR.ADMINISTER OXYGEN.AVOID SYMPATOMIMETIC AMINES SUCH AS
EPINEPHRINE WHICH MAY PRECIPITATE ARRHYTHMIAS.INGESTION:INDUCE
VOMITING . CALL DOCTOR IMMEDIATLY
===================== Fire Fighting Measures =====================
Flash Point:NONE
Lower Limits:8.0
Upper Limits:10.5
Extinguishing Media:WATER/FOG
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS
================== Accidental Release Measures ==================
Spill Release Procedures:USE PROPER PROTECTIVE EQUIPMENT.SMALL
LEAKS:MOP UP OR SOAK UP IMMEDIATELY.REMOVE TO OUT OF DOORS.LARGE
SPILLS:EVACUATE AREA.CONTAIN LIQUID,TRANSFER TO CLOSED METAL
CONTAINER,KEEP OUT OF WATER SUPPLY
====================== Handling and Storage ======================
Handling and Storage Precautions:HANDLE WITH CARE,AVOID BREATHING
VAPORS.STORE IN COOL DRY AREA.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:SELF-CONTAINED BREATHING APPARATUS IF N.A.C.
EXCEEDS 350 PPM
Ventilation:LOCAL EXHAUST
Protective Gloves:NOT REQUIRED
Eye Protection:SAFETY GLASSES
Other Protective Equipment:EYE BATH AND SAFETY SHOWER
Supplemental Safety and Health
PRODUCT IS CONSIDERED NONFLAMMABLE UNDER NORMAL INDUSTRIAL
CONDITIONS,HAS NO FLASH POINT MAXIMUM ALLOWABLE CONCENTRATION
(M.A.C.) IS 500 PPM.NO KNOWN ANTIDOTE FOR INGESTION.TREAT SYMPTOMS.
================== Physical/Chemical Properties ==================
HCC:T4
Boiling Pt:B.P. Text:86.3F 30F
Vapor Pres:100
Vapor Density:4.55
Spec Gravity:1.321
Solubility in Water:NEGLIGIBLE
Appearance and Odor:COLORLESS LIQUID
Percent Volatiles by Volume:100
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
WATER
Stability Condition to Avoid:OPEN FLAME WELDING AREAS.OTHER HIGH TEMP.
Hazardous Decomposition Products:HYDROGEN CHLORIDE,PHOSGENE AND
CHLORINE
==================== Disposal Considerations ====================
Waste Disposal Methods:SEND SOLVENT TO RECLAIMER. IN SOME CASES IT CAN
BE TRANSPORTED TO AN AREA WHERE IT CAN BE PLACED ON THE GROUND AND
ALLOWED TO EVAPORATE SAFELY.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|