===================== Product Identification =====================
MSDS NAME:PR-1201-Q
NIIN:00-814-0394
MSDS Number: BFQMY
=== Responsible Party ===
Company:PRODUCTS RESEARCH & CHEMICAL CORP.
Address:5430 SAN FERNANDO ROAD
Box:1800
City:GLENDALE
State:CA
ZIP:91209
Country:US
Info Phone Num:818-240-2060
Emergency Phone Num:818-240-2060
CAGE:DO563
=== Contractor Identification ===
Company:PRC-DESOTO INTERNATIONAL, INC. A PPG INDUSTRIES COMPANY
Address:5430 SAN FERNANDO RD
Box:1800
City:GLENDALE
State:CA
ZIP:91209
Country:US
Phone:818-240-2060
CAGE:83574
Company:PRODUCTS RESEARCH & CHEMICAL
Address:NOW DBA COURTAULDS AEROSPACE
Box:1800
City:GLENDALE
State:CA
ZIP:91209
Phone:818-240-2060
CAGE:DO563
============= Composition/Information on Ingredients =============
Name:POLYSULFIDE POLYMER
Fraction by Wt: 50%
ACGIH TLV:UNKKNOWN
Name:PIGMENTS
Fraction by Wt: 35%
Name:RESINS PLASTICIZERS
Fraction by Wt: 3%
Name:TOLUENE (SARA III)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: 4%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:200 PPM; Z-2
ACGIH TLV:S, 50 PPM; 9394
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
===================== Hazards Identification =====================
Effects of Overexposure:BASE COMPOUND MAY BE IRRITATING TO SKIN,EYES.
======================= First Aid Measures =======================
First Aid:SKIN:WASH THOROUGHLY WITH SOAP AND WATER.EYES;FLUSH
THOROUGHLY WITH LARGE AMOUNTS OF WATER.INGESTION:INDUCE
VOMITING.INHALATION:REMOVE TO FRESH AIR.GIVE CPR/OXYGEN IF
NECESSARY.GET MEDICAL ATTENTION.
===================== Fire Fighting Measures =====================
Flash Point Method:PMCC
Flash Point:>22.8C, 73.F
Lower Limits:1.0
Upper Limits:7.0
Extinguishing Media:FOAM,DRY CHEMICAL,CARBON DIOXIDE.
Fire Fighting Procedures:WEAR AIR-SUPPLIED RESPIRATOR WHILE FIGHTING
FIRES.
Unusual Fire/Explosion Hazard:EMISSION OF TOXIC VAPORS.
================== Accidental Release Measures ==================
Spill Release Procedures:STOP LEAK AT SOURCE.ELIMINATE IGNITION
SOURCES.ABSORB EXCESS WITH RAGS,PAPER TOWELS OR OTHER ABSORBENT
MATERIAL.CLEAN AREA WITH XYLENE OR TOLUENE.PLACE IN CLOSED
CONTAINERS.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP IN CLOSED CONTAINERS AT ROOM
TEMPERATURE.AVOID FIRE HAZARDS.PROTECT FROM PHYSICAL DAMAGE.AVOID
ACCELERATOR SPILLAGE.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:AIR SUPPLIED RESPIRATOR RECOMMENDED IN CONFINED
AREAS.
Ventilation:MECHANICAL/LOCAL EXHAUST.TO MINIMIZE SOLVENT VAPOR BELOW
TLV
Protective Gloves:POLYETHYLENE
Eye Protection:CHEM GOGGLES
Other Protective Equipment:USE PROTECTIVE HAND CREAM.
Supplemental Safety and Health
KEY1:F3.
================== Physical/Chemical Properties ==================
HCC:D1
Spec Gravity:1.7
Solubility in Water:NEGLIGIBLE
Appearance and Odor:PINKSIH-BROWN SYRUP;SLIGHT TOLUENE ODOR.
Percent Volatiles by Volume:6
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
DECOMPOSES WHEN EXPOSED TO STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:AVOID IGNITION SOURCES
Hazardous Decomposition Products:OXIDES OF SULFUR;HYDROGEN
SULFIDE;FORMIC ACID.
==================== Disposal Considerations ====================
Waste Disposal Methods:PLACE ABSORBED MATL IN CLOSED CONTAINERS AND
DISPOSE IN ACCORDANCE WITH LOCAL,STATE AND FEDERAL REGULATIONS.DO
NOT INCINERATE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|