Search   
MSDS  
:
 EPOCAST 4D
CAS  
:
 
NAME  
:
 bis a type epoxy resin;tlv unknown, but spi erf hazard
inert filler;wt% range 40-45%
plasticizer; wt% range 5-10%
=====================  Product Identification  =====================

MSDS NAME:EPOCAST 4D
NIIN:00-979-7711
MSDS Number: BGBJH
=== Responsible Party ===
Emergency Phone Num:213-247-6210
CAGE:GO766
=== Contractor Identification ===
Company:CIBA SPECIALTY CHEMICALS CORP, N. A. / PERFORMANCE
    POLYMERS
Address:5121 SAN FERNANDO RD WEST
Box:City:LOS ANGELES
State:CA
ZIP:90039-1011
Country:US
Phone:818-247-6210/800-873-1138
CAGE:99384
CAGE:GO766

=============  Composition/Information on Ingredients  =============

Name:BIS A TYPE EPOXY RESIN;TLV UNKNOWN, BUT SPI ERF HAZARD
    CLASS IS II;WT% RANGE 40-452
Fraction by Wt: 45%

Name:INERT FILLER;WT% RANGE 40-45%
Fraction by Wt: 45%

Name:PLASTICIZER; WT% RANGE 5-10%
Fraction by Wt: 10%

=====================  Hazards Identification  =====================

Effects of Overexposure:REPEATED OR PROLONG CONTACT MAY CAUSE
    IRRITATION TO THE EYES,SKIN,OR RESPIRATORY TRACT.

=======================  First Aid Measures  =======================

First Aid:EYE CONTRACT:GET IMMED MD ATTN-FLUSH W/FLOWINGWATER AT LEAST
    15 MIN.SKIN CONTCT:WASH AREA THOROUGHLY W/SOAP & WATER.INH:MOVE
    EXPOSED INDIV TO FRESH AIR-CALL MD. REMOVE CONTAMINATED CLOTHNG.
    LAUNDER CO NTAMINATED CLOTHING BEFORE REUSE.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:CO*2, FOAM, DRY CHEM & H*2O FOG.
Fire Fighting Procedures:WEAR CHEM. PROT. SUIT WITH SCBA. COOL CONTRS
    WITH H*2O.
Unusual Fire/Explosion Hazard:MATL MAY/MAY NOT BURN. CONTAINER MAY
    EXPLODE IN HEAT OF FIRE.FIRE MAY YIELD TOXIC GASES.

==================  Accidental Release Measures  ==================

Spill Release Procedures:EVACUATE UNPROTECTED PERSONS. ELIM IGNITION
    SOURCES. STOP LEAK. H*2O SPRAY COOL CONT/DIVERT SPILL FROM
    FIRE/HEAT. PROVIDE VENTILATION. ABSORB W/COMMERCIAL
    ABSORBENT,SHOVEL INTO METAL DRUMS:LG SPILL:DI KE W COMMERCIAL
    ABSORBENT,PUMP INTO COVERED DRUMS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENT,LOW FIRE
    RISK AREA. PROTECT FROM PHYSICAL DAMAGE.AVOID ANY PHYSICAL CONTACT.
    KEEP CONTAINERS TIGHTLY CLOSED.
Other Precautions:MAINTAIN STRICT HYGIENE, AVOID PHYSICAL CONTACT,
    REMOVE& WASH CONTAMINATED CLOTHING. MFG SUGGESTS USE OF PROTECTIVE
    SKIN CREAMS. EXHAUST CURING OVENS TO OPEN AIR. AVOID TEMPERATURE
    EXTREMES.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF EXPOSD TLV,NIOSH/MESA APPR SELF-CNTND BRTHG
    APP (POS PR MODE)
Ventilation:MECHANICAL (GENERAL/LOCAL EXHAUST)
Protective Gloves:PV/RUBBER
Eye Protection:SAFETY/CHEM GOGGLES
Other Protective Equipment:FULL WORK CLOTHING TO PREVENT REPEATED OR
    PROLONGED CONTACT.
Supplemental Safety and Health
PRODUCT IS WATER INSOLUBLE

==================  Physical/Chemical Properties  ==================

HCC:N1
Vapor Density:N/AN
Spec Gravity:1.4
Solubility in Water:NEGLIGIBLE
Appearance and Odor:THICK GREY LIQUID; ODOR NOT SPECIFIED
Percent Volatiles by Volume:0

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID HIGH CONCENTRATIONS OF HARDENERS.
Stability Condition to Avoid:HEAT, IGNITION SOURCES
Hazardous Decomposition Products:NONE NOTED, BUT EXPECT CO, CO*2 H*2O

====================  Disposal Considerations  ====================

Waste Disposal Methods:KEEP IN COVERED CONTAINERS PENDING DISPOSAL.
    HANDLE AND DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
    INTERNATIONAL,FEDERAL,STATE AND LOCAL REGULATIONS. MFG SUGGESTS
    BURY IN APPROVED LANDFILL WASHRES IDUE W DETERGEMT WATER.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
O-S-809C,TYPE I,CLASS2,SULFURIC ACID 7664-93-9
7732-18-5
G623 9016-00-6
BG 14;SILICONE GREASE
L14 COMPOUND 9016-00-6
DOW CORNING 7 COMPOUND 63394-02-5
CHEM-PLEX 620 SILICONE COMPOUND 63148-62-9
TUFF-KOTE,OIL-BASE SEALING COMPOUND 8030-30-6
7446-14-2
200P1145 1336-36-3
SODIUM SULFITE 7757-83-7
ETHYL ACETATE 141-78-6
6591 7440-48-4
6624 7440-48-4
DEOXIDINE 624 7664-38-2
111-46-6
7732-18-5
3919-S "PREP-SOL" SOLVENT 64742-88-7
ETHYLENE GLYCOL 107-21-1
CARBON TETRACHLORIDE 56-23-5
CARBON TETRACHLORIDE 56-23-5
AMMONIUM BIFLUORIDE 1341-49-7
WYANDOTTE M.F. ACID 1341-49-7
OP2570C 1336-36-3
CUPRIC NITRATE 3251-23-8
FERROUS CHLORIDE 13478-10-9
MOLYKOTE 41 GREASE 63394-02-5
1333-86-4
201P80 1336-36-3
49F3215 1336-36-3
49F1495 1336-36-3
FSR405E 1336-36-3
28F670FC 1336-36-3
ETHYLENE DIAMINETETRAACETIC ACID SOLUTIONS 60-00-4
7732-18-5
VERSENE 100, CHELATING AGENT 64-02-8
5064-31-3
1310-73-2
7732-18-5
19019-43-3
2836-32-0
21F809 1336-36-3
SURFA-ETCH 108 ETCHING SOLUTION 7664-38-2
AWWA B 702-84 16893-85-9
SODIUM SILICOFLOURIDE 16893-85-9
SODIUM SILICOFLUORIDE 16893-85-9
SODIUM SILICOFLUORIDE, TECHNICAL 16893-85-9
SODIUM SILICOFLUORIDE TECHNICAL 16893-85-9
SODIUM SILICOFLUORIDE 16893-85-9
SODIUM SILICOFLUORIDE 16893-85-9
C3BROK
201P1299 1336-36-3
KKT3060 1336-36-3
FA5190 1336-36-3
KM2-30-2X500 1336-36-3
EPOCAST 4D
SR-155 1330-20-7
9994445 7440-48-4
EC-2241 108-88-3
1330-20-7
71-36-3
112-43
49F6224FB 1336-36-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net