=====================  Product Identification  =====================

MSDS NAME:VINYL BENZENE
NIIN:00-987-4126
MSDS Number: BGBYD
=== Responsible Party ===
Company:SHAPE PRODUCTS
Address:1127 57TH AVE.
City:OAKLAND
State:CA
ZIP:94621-4427
Country:US
Info Phone Num:415-534-1186
Emergency Phone Num:415-534-1186
CAGE:3D869
=== Contractor Identification ===
Company:SHAPE PRODUCTS
Address:1127 57TH AVE.
Box:City:OAKLAND
State:CA
ZIP:94621-4427
Country:US
Phone:510-534-1186 OR 800-444-0015
CAGE:3D869

=============  Composition/Information on Ingredients  =============

Name:STYRENE, MONOMER  (SARA III)
CAS:100-42-5
RTECS #:WL3675000
Fraction by Wt: 99.6%
OSHA PEL:100 PPM
ACGIH TLV:S,50PPM/100STEL;9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:PARA-TERT-BUTYLCATECHOL INHIBITOR--15PPM.
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

Effects of Overexposure:CONJUNCTIVITIS,IRRITATION OF RESPIRATORY
    TRACT,LACK OF APPETITE,NAUSEA,VOMITING,WEAKNESS,DROWSINESS.

=======================  First Aid Measures  =======================

First Aid:IRRIGATE EYES WITH WATER. WASH CONTAMINATED AREAS OF BODY
    WITH SOAP & WATER.

=====================  Fire Fighting Measures  =====================

Flash Point:90F COC
Lower Limits:1.1
Upper Limits:6.1
Extinguishing Media:CO*2, DRY CHEMICAL, FOAM
Fire Fighting Procedures:WORK FROM SAFE DISTANCE
Unusual Fire/Explosion Hazard:NONE-EXCEPT, MAY TRAVEL A CONSIDERABLE
    DISTANCE TO A SOURCE OF IGNITION AND FLASH BACK.

==================  Accidental Release Measures  ==================

Spill Release Procedures:COVER WITH FOAM.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP COOL & AWAY FROM SULFURIC
    ACID.COPPER OR COPPER CONTAINING ALLOYS SHOULD BE AVOIDED AS
    CONTAINERS.IN HOT CLIMATES,STORE IN TANK W/TEMP.ALARM SYST
Other Precautions:LARGE QUANTITIES CAN BE SAFELY STORED IN VENTED METAL
    STORAGE TANKS W/CERTAIN SAFEGUARDS FOR POLYMERIZATION. STORAGE
    VESSELS SHOULD BE ELECTRICALLY GROUNDED TO PREVENT STATIC
    ELECTRICITY.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:CHEMICAL CARTRIDGE RESPIRATOR.
Ventilation:LOCAL EXHAUST IS PREFERRED.
Protective Gloves:RUBBER
Eye Protection:CHEMICAL GOGGLES
Other Protective Equipment:NONE
Supplemental Safety and Health
MSDS DATED MAY 85.

==================  Physical/Chemical Properties  ==================

HCC:F3
Boiling Pt:B.P. Text:208F
Vapor Density:1.1
Spec Gravity:0.90
Evaporation Rate & Reference:12.4, ETHER
Solubility in Water:0.0
Appearance and Odor:OILY AROMATIC ODOR
Percent Volatiles by Volume:100

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:NO
SULFURIC ACID, OXIDIZING AGENTS, COPPER OR COPPER ALLOYS
Stability Condition to Avoid:AT ELEVATED TEMPERATURES
Hazardous Decomposition Products:POLYMERS
Conditions to Avoid Polymerization:ELEVATED TEMPERATURE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN CLASS 1 CHEMICAL DUMP, OR SPRAY BY
    MIST INTO A FURNACE UNDER APPROVED CONTROLLED CONDITIONS.
    INCINERATION WILL BECOME EASIER BY MIXING WITH A MORE FLAMMABLE
    SOLVENT.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***