===================== Product Identification =====================
MSDS NAME:EC-1648A STRUCTURAL EPOXY ADHESIVE, PT A
NIIN:00-987-7157
Kit Part:Y
MSDS Number: BGBYJ
=== Responsible Party ===
Company:3M COMPANY-ACS DIVISION
Address:3M CENTER
City:ST PAUL
State:MN
ZIP:55144-1000
Country:US
Emergency Phone Num:612-733-1110
CAGE:04963
=== Contractor Identification ===
Company:3M MINNESOTA MINING AND MFG CO ADHESIVES SEALERS DIV
Address:3M CTR
Box:City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:800-364-3577/651-737-6501(24 HOURS)
CAGE:04963
Company:EATON CORP PRESSURE SENSORS DIV
Address:15 DURANT AVE
Box:City:BETHEL
State:CT
ZIP:06801-1901
Country:US
Phone:203-796-6000
CAGE:02750
============= Composition/Information on Ingredients =============
Name:ALUMINUM SILICATE (AS NUISANCE DUST OR PARTICULATES NOT
OTHERWISE REGULATED)
CAS:1302-76-7
RTECS #:BD1450000
Fraction by Wt: <18%
Other REC Limits:NONE
OSHA PEL:15 MG/M3 TOTAL DUST
ACGIH TLV:10 MG/M3 TDUST;8990
Name:SILICA, AMORPHOUS, DUST
CAS:112945-52-5
RTECS #:VV7310000
Fraction by Wt: <18%
Other REC Limits:NONE
OSHA PEL:6 MG/M3
ACGIH TLV:10 MG/M3; 8990
Name:POLYAMIDE RESIN
Fraction by Wt: 81%
Name:CHROMIUM (III) OXIDE
CAS:1308-38-9
RTECS #:GB6475000
Fraction by Wt: 1.0%
Other REC Limits:NONE
OSHA PEL:0.5 MG/M3 (CR)
ACGIH TLV:0.5 MG/M3 (CR); 8990
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:IRRITANT, SENSITIZER.
Effects of Overexposure:EYE: SEVERE IRRITANT. SKIN: POSSIBLE
IRRITATION AND SENSITIZATION ON REPEATED/PROLONGED EXPOSURE.
INHALATION: FUMES OR DUST FROMCURING OPERATION MAY CAUSE
IRRITATION OF RESPIRATORY SYSTEM. INGES TION: G. I. SYSTEM
IRRITATION POSSIBLEBUT UNLIKELY.
Medical Cond Aggravated by Exposure:ANY PRE-EXISTING ALLERGY OR
SENSITIVITY.
======================= First Aid Measures =======================
First Aid:EYE:IMMED FLUSH W/ LARGE AMT OF WATER FOR AT LEAST 10
MIN.CALL MD.SKIN:WASH W/ SOAP & WATER.INHAL:PROVIDE FRESH AIR.IF
BREATH DIFFICULTY PERSIST,CALL MD INGEST:NO FIRST AID
INDICATED.CONTACT MD.
===================== Fire Fighting Measures =====================
Flash Point:N/R(PER MFR)
Extinguishing Media:WATER,CO*2,FOAM,DRY CHEMICALS
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:N/K(PER MFR)
================== Accidental Release Measures ==================
Spill Release Procedures:NO CRITICAL STEPS.SCRAPE UP SPILL AND PLACE IN
METAL CONTAINER FOR DISPOSAL OR SALVAGE.
Neutralizing Agent:NONE
====================== Handling and Storage ======================
Handling and Storage Precautions:AVOID EYE,SKIN CONTACT.ANY CURING
STATIONS USING HEAT SHOULD BE VENTED TO THE OUTDOORS.KEEP CONTAINER
TIGHTLY CLOSED WHEN NOT IN USE.
Other Precautions:IF CURED MIXED PRODUCT IS SANDED OR GROUND,USE
PROTECTIVE GOGGLES AND DUST MASK TO PREVENT IRRITATION.KEEP OUT OF
REACH OF CHILDREN.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE NIOSH/MSHA APPROVED DUST MASK WHEN SAND OR
GROUND CURED PRODUCT.
Ventilation:MECHANICAL,LOCAL TO OUTDOORS
Protective Gloves:IMPRVIOUS
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health
UPDATE PER 3M MSDS DOC# 10-6260-3 DATED 29 APRIL 1986. 3M ID# IS
62-1649-8526-9 PART A OF TWO-PART A/B KIT. KEY1:N1.
================== Physical/Chemical Properties ==================
HCC:V7
Spec Gravity:1.04
Viscosity:PASTE
Evaporation Rate & Reference:N/R(PER MFR)
Solubility in Water:NIL
Appearance and Odor:VISCOUS GREEN PASTE,AMIDE ODOR
Percent Volatiles by Volume:0.0
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
N/K PER MFR
Hazardous Decomposition Products:CO,CO*2,METALLIC PARTICULATE WHEN
EXPOSED TO FLAME.
==================== Disposal Considerations ====================
Waste Disposal Methods:COMMERCIAL INCINERATION WITH DESTRUCTION AND
REMOVE EFFICIENCY GREATER THAN 99.99% OR RECLAMATION IS
PREFERRED.OTHERWISE,DISPOSE IN ACCORDANCE WITH LOCAL AND CURRENT
U.S. ENVIRONMENTAL PROTECTION AGEN CY,STATE AND FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|