=====================  Product Identification  =====================

MSDS NAME:LUBE-LOK 5306 (CONCENTRATE)
NIIN:00-985-7255
MSDS Number: BGBWD
=== Responsible Party ===
Company:ELECTROFILM
Address:7116 LAUREL CANYON BLVD
City:NORTH HOLLYWOOD
State:CA
ZIP:91605
Info Phone Num:213-875-1000
Emergency Phone Num:213-875-1000
CAGE:MO076
=== Contractor Identification ===
Company:ELECTROFILM
Address:7116 LAUREL CANYON BLVD
Box:City:NORTH HOLLYWOOD
State:CA
ZIP:91605
Phone:213-875-1000
CAGE:MO076
Company:ELECTROFILM MFG CO
Address:27727 AVE SCOTT
Box:55669
City:VALENCIA
State:CA
ZIP:91355
Country:US
Phone:805-257-2242
CAGE:85932

=============  Composition/Information on Ingredients  =============

Name:MOLYBDENUM DISULFIDE
CAS:1317-33-5
RTECS #:QA4697000
OSHA PEL:10 MG/M3 TDUST (MO)
ACGIH TLV:10 MG/M3 (MO); 8990

Name:LEAD PHOSPHITE
CAS:1344-40-7
RTECS #:OG2880000

Name:ANTIMONY TRIOXIDE  (SARA III)
CAS:1309-64-4
RTECS #:CC5650000
OSHA PEL:0.5 MG/M3 (SB)
ACGIH TLV:0.5 MG SB/M3; 9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:THE COMBINATION OF INGREDIENTS 01,02,AND 03 EQUAL 20.8 %
RTECS #:9999999ZZ

Name:PHENOLIC RESIN
Fraction by Wt: 10.6%

Name:TOLUENE  (SARA III)
CAS:108-88-3
RTECS #:XS5250000
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:METHYL ISOBUTYL KETONE  (SARA III)
CAS:108-10-1
RTECS #:SA9275000
OSHA PEL:100 PPM/75 STEL
ACGIH TLV:50 PPM/75 STEL; 9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:ISOPROPYL ALCOHOL  (SARA III)
CAS:67-63-0
RTECS #:NT8050000
OSHA PEL:400 PPM/500 STEL
ACGIH TLV:400 PPM/500STEL;9192

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:LIQUID IS MODERATELY IRRITATING TO
    SKIN AND EYES.
Explanation of Carcinogenicity:NOT LISTED
Effects of Overexposure:HEADACHE, NAUSEA, DIZZINESS, ETC.LIQUID
    MODERATELY IRRITATING TO SKIN AND EYES.
Medical Cond Aggravated by Exposure:SKIN DISORDER, PULMONARY DISORDERS

=======================  First Aid Measures  =======================

First Aid:INHALATION: REMOVE VICTIM AND RESTORE BREATHING IF REQUIRED.
    SKIN: REMOVE WITH SOAP & WATER. EYES: FLUSH EYES WITH WATER FOR 15
    MINUTES. GET MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:34F,1C
Lower Limits:1.0
Upper Limits:7.0
Extinguishing Media:FOAM, CO*2 STEAM, WATER-FOG OR DRY CHEMICAL
Fire Fighting Procedures:EXCLUDE AIR COOL EXPOSED CONTAINERS WITH
    WATER.
Unusual Fire/Explosion Hazard:NONE SPECIFIC BY MANUFACTUER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:AVOID OPEN FLAMES, SPARKS OR IGNITION SOURCES.
    VENTILATE AREA. ABSORB MATERIAL AND PLACE IN DISPOSAL CONTAINER.
Neutralizing Agent:NONE

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID OPEN FLAMES AND SPARKS SOURCES.
    AVOID SPLASH FILLING. PROVIDE ADEQUATE VENTILATION. AVOID EXCESSIVE
    HEAT. KEEP CONTAINER CLOSED WHEN NOT IN USE.
Other Precautions:NONE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH APPROVED ORGANIC CANISTER MASK OR AIR
    PACK.
Ventilation:LOCAL EXHAUST IS DESIRABLE, MECHANICAL(GENERAL) REQUIRED
    WITH CLASS "D" EXPLOSION PROFF MOTOR AND SWITCHES.
Protective Gloves:NORMALLY NOT REQUIRED
Eye Protection:CHEMICAL SPLASH GOGGLES AND/OR SHIELD
Other Protective Equipment:LONG SLEEVES WORK CLOTHING. EYE WASH
    STATION.
Work Hygienic Practices:LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
NONE.

==================  Physical/Chemical Properties  ==================

HCC:F2
Boiling Pt:B.P. Text:132F,55.5C
Vapor Pres:24
Vapor Density:2.9
Spec Gravity:1.06
Evaporation Rate & Reference:1.6 (N.BUTYL ACE TATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:GRAY,PAINT LIKE MATERIAL, AROMATIC ODOR LIKE
    BENZENE.
Percent Volatiles by Volume:86

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING  MATERIALS.
Hazardous Decomposition Products:CO, CO2 WHEN BURNED.

====================  Disposal Considerations  ====================

Waste Disposal Methods:WIPE UP WITH ABSORBANT MATERIAL OR FLUSH WITH
    WATER TO OPEN, WELL VENTILATED AREA. USE OIL SEWER IF AVAILABLE.
    REMOVE TO CONTAINER. FOLLOW APPLICABLE FEDERAL, STATE OR LOCAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***