===================== Product Identification =====================
MSDS NAME:VCI #105 OIL
NIIN:00-985-7293
MSDS Number: BGBWT
=== Responsible Party ===
Company:DAUBERT CHEMICAL COMPANY
Emergency Phone Num:(312) 582-1000
CAGE:02847
=== Contractor Identification ===
Company:DAUBERT CHEMICAL CO
Address:1200 JORIE BLVD
City:OAK BROOK
State:IL
ZIP:60521-2210
Country:US
CAGE:02847
============= Composition/Information on Ingredients =============
Name:MINERAL OIL (EXPOSURE REGULATED AS 'OIL MIST')
CAS:8012-95-1
RTECS #:PY8030000
Fraction by Wt: 90.0%
OSHA PEL:5 MG/M3
ACGIH TLV:5 MG/M3/10 STEL;9192
Name:AMINE CARBOXYLATES
Fraction by Wt: 10.0%
===================== Hazards Identification =====================
Effects of Overexposure:IRRITATION OF MUCOUS MEMBRANES & EYES WITH
POSSIBLE SKIN IRRITATION
======================= First Aid Measures =======================
First Aid:REMOVE TO FRESH AIR. GIVE CPR/OXYGEN IF NEED. SKIN:WASH WITH
SOAP & WATER. EYES:FLUSH WITH WATER 15 MIN. KEEP WARM AND QUIET
!
===================== Fire Fighting Measures =====================
Flash Point:240F/115.5C(COC)
Extinguishing Media:CO*2, FOAM, DRY CHEM.
Fire Fighting Procedures:WEAR SELF-CNTD BRTHG,APP H*20 SPRAY TO COOL
CONTR.
Unusual Fire/Explosion Hazard:MAY IGNITE BY HEAT,SPARK,FLAME,AIR
EXPOSURE;MAY REIGNITE,CONTACT W H*20 PRODUCES FLAMM GAS.
================== Accidental Release Measures ==================
Spill Release Procedures:ELIMINATE IGNITION SOURCES. STOP LEAK.
EVACUATE AREA.DO NOT TOUCH SPILLAGE. SM SPILL:ABSORB W. INERT
ABSORBENT. PLACE IN CLOSED CONTAINER. FLUSH AREA W. WATER. LG
SPILL: DIKE AHEAD FOR LATER DISPOSAL. NOTIFY AUTHORITIES.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENTILATED
AREA. PROTECT FROM PHYSICAL DAMAGE.AVOID ANY PHYSICAL CONTACT. KEEP
CONTAINERS TIGHTLY CLOSED
Other Precautions:NONE KNOWN
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NONE SHOULD BE NEEDED(ADEQUATE VENTILATION)
Ventilation:MECHANICAL (GENERAL/LOCAL EXHAUST)
Protective Gloves:AS REQUIRED
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health
MSDS UNDATED; SPEC REFERENCE: MIL-P-46002A/MR/,GRADE I MATL.
================== Physical/Chemical Properties ==================
HCC:V6
Spec Gravity:0.893
Solubility in Water:SLIGHT
Appearance and Odor:LIGHT AMBER LIQ-SLIGHTLY IRRITATING ODOR
Percent Volatiles by Volume:5.0
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT, IGNITION SOURCES
Hazardous Decomposition Products:NONE NOTED,BUT EXPECT CO, CO*2, H*2O.
==================== Disposal Considerations ====================
Waste Disposal Methods:KEEP IN COVERED DRUMS,PENDING DISPOSAL. HANDLE &
DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
INTERNATIONAL,FEDERAL,STATE, & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|