=====================  Product Identification  =====================

MSDS NAME:03-GY-68 CATALYST,GRAY 36231,ISOCYANATE
NIIN:01-107-4945
Kit Part:Y
MSDS Number: BGMFG
=== Responsible Party ===
Company:DEFT CHEMICAL COATINGS
Address:17451 VON KARMAN AVE
City:IRVINE
State:CA
ZIP:92714-6205
Country:US
Emergency Phone Num:NONE
CAGE:EO418
=== Contractor Identification ===
Company:DEFT CHEMICAL COATINGS
CAGE:EO418
Company:DEFT,  INC.
Address:17451 VON KARMAN AVE
City:IRVINE
State:CA
ZIP:92614
Country:US
Phone:949-474-0400
CAGE:33461

=============  Composition/Information on Ingredients  =============

Name:METHYL ETHYL KETONE (2-BUTANONE) (MEK)  (SARA III)
CAS:78-93-3
RTECS #:EL6475000
Fraction by Wt: 40.0%
OSHA PEL:200 PPM/300 STEL
ACGIH TLV:200 PPM/300STEL 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:XYLENES (O-,M-,P- ISOMERS)	(SARA III)
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 5.0%
OSHA PEL:100 PPM/150 STEL
ACGIH TLV:100 PPM/150STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:2-ETHOXYETHYL ACETATE (CELLOSOLVE ACETATE) (EGEEA)
CAS:111-15-9
RTECS #:KK8225000
Fraction by Wt: 20.0%
OSHA PEL:S,100 PPM
ACGIH TLV:S, 5 PPM; 9192

Name:1,6-DIISOCYANATOHEXANE  (HEXAMETHYLENE DIISOCYANATE)
CAS:822-06-0
RTECS #:MO1740000
Fraction by Wt: 0.2%
ACGIH TLV:0.005 PPM; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Name:BIURET OF 1,6 HEXAMETHYLENE DIISOCYANATE (APPROX <35%)
Fraction by Wt: 34.8%

=====================  Hazards Identification  =====================

Effects of Overexposure:EYES:MODERATE IRRIT;SKIN:POSSIBLE IRRIT BY
    SOLVENTS;INH:SOLVENT VAPORS CAN CAUSE IRRIT OR NARCOSIS

=======================  First Aid Measures  =======================

First Aid:SKIN:WIPE OFF WITH A RAG THEN THOROUGH RINSING W.H*2O &
    WASHING W/MILD SOAP AND WATER;EYES:FLUSH W/WATER FOR AT LEAST 10
    MIN & CONSULT AN EYE PHYSICIAN;INH:REMOVE TO FRESH AIR.GIVE
    CPR/OXYGEN IF NEEDE D.

=====================  Fire Fighting Measures  =====================

Flash Point:28F(-2.2C)-TOC
Lower Limits:1.7
Extinguishing Media:CARBON DIOXIDE,FOAM OR DRY CHEMICALS
Fire Fighting Procedures:USE SELF-CNTND BRTHNG APP;CAN USE H*2O
    SPRAY/FOG EFFECTIVLY.
Unusual Fire/Explosion Hazard:CAUTION AGAINST APPLICATION TO HOT
    SURFACES & USE IN AREAS WHERE SOURCES OF IGNITION MAY BE PRESENT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:EVACUATE UNPROTCTD PERSONS.ELIM IGN
    SOURCES.USE SAFETY EQUIP.VENTLATE AREA.STOP LEAK W/O RISK;ABSORB SM
    SPILL W/OIL ABSORBING COMPD/RAGS.PER MFR,FLUSH AREA W/LG AMT
    H*2O;DIKE LG SPILL.PUMP LIQ TO SALV AGE TANK.SHOVEL UP RESIDUE INTO
    COVEREDCONTNRS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENTILATED,LOW
    FIRE RISK AREA.KEEP CONTNRS TIGHTLY CLOSED.PROTCT FROM PHYSICAL
    DAMAGE.
Other Precautions:AVOID PROLONGED INHALATION OF VAPORS.IF VENTILATION
    IS POOR,A FRESH AIR SUPPLY MASK IS RECOMMENDED.AVOID PHYSICAL
    CONTACT.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH APPROVED RESPIRATOR FOR
    PAINT,LAQUER,ENAMEL & ORGAIC VAPOR.
Ventilation:ADEQUATE USING EXHAUST FAN.
Protective Gloves:NEOPRENE/RUBBER
Eye Protection:SAFETY/CHEM GOGGLE W/SHLD
Other Protective Equipment:USE CARTRIDGE TYPE RESPIRATOR W/PARTICULATE
    FILTERS.
Supplemental Safety and Health
TWO PART RESIN MODIFIED POLYURETHANE COATING;  THIS DATA DESCRIBES
    CATALYST (COMPONENT II), TYPE I MATERIAL OF MIL-C-83286B;  ALSO
    KNOWN AS "DEFTHANE CATALYST";  SEE P/N IND "A" FOR BASE, SAME NSN. 
    K EY1:F3.

==================  Physical/Chemical Properties  ==================

HCC:F2
Boiling Pt:B.P. Text:175-331F
Vapor Pres:29
Vapor Density:>1.0
Spec Gravity:0.933
Evaporation Rate & Reference:<1(SLWR THAN ETHR)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR THIN WATER WHITE ORGANIC LIQUID-ODOR OF MEK
Percent Volatiles by Volume:71.1

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
CORROSIVE OXIDIZING MATERIALS,WATER,ALCOHOLS,ETC.
Stability Condition to Avoid:SOURCES OF IGNITION
Hazardous Decomposition Products:CO,CO*2 &/OR OXIDES OF NITROGEN

====================  Disposal Considerations  ====================

Waste Disposal Methods:KEEP IN CLOSED CONTNRS PENDING DISPOSAL.MFR
    SUGGESTED,DISPOSE IN TIGHTLY CLOSED CONTAINERS & FINALLY DISPOSE BY
    SANITARY LANDFILL IAW APPLICABLE REGS;HANDLE & DISPOSE IN FULL
    COMPLIANCE W/ALL FED,STAT E,& LOCAL REGULATIONS CONCERNING WASTE
    DISPOSAL

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***