=====================  Product Identification  =====================

MSDS NAME:A-6
NIIN:01-109-7865
MSDS Number: BGMGG
=== Responsible Party ===
Company:ARMSTRONG PRODUCTS COMPANY,INC.
Address:407 ARGONNE RD
Box:657
City:WARSAW
State:IN
ZIP:46580-3811
Country:US
CAGE:DO043
=== Contractor Identification ===
Company:ARMSTRONG PRODUCTS CO
Box:647
City:WARSAW
State:IN
ZIP:46580
Phone:219-267-3226 OR 219-267-5375
CAGE:DO043
Company:MORTON THIOKOL,INC;ARMSTRONG PRODUCTS COMPANY
Address:407-ARGONNE ROAD
Box:647
City:WARSAW
State:IN
ZIP:46580-3811
Country:US
Phone:219-267-3226
CAGE:98911

=============  Composition/Information on Ingredients  =============

Name:EPOXY RESIN
Fraction by Wt: 40%

Name:VINYL RESIN
Fraction by Wt: 17%

Name:FILLER
Fraction by Wt: 23%

=====================  Hazards Identification  =====================

Effects of Overexposure:EYE MINOR IRRIT. SKIN:POSS SENSITIZER & MINOR
    IRRIT. INHAL:POSS PROBLEM WHEN HEATED TO HIGH TEMP.

=======================  First Aid Measures  =======================

Eyes:FLUSH WITH WATER 15 MINUT3S. IF ILL EFFECTS DEVELOP, GET
    MD. SKIN:WASH W/SOAP & WATER. REMOVE CONTAMINATED CLOTHING & WASH
    THEM BEFORE REUSE. INHAL:REMOVE TO FRESH AIR & GET MD. INGEST:NO
    KNOWN A NTIDOTE. T4REAT SYMPTOMS. W/LG AMTS INDUCE VOMT.

=====================  Fire Fighting Measures  =====================

Flash Point:>135F;57C, TCC
Extinguishing Media:FOAM,CO*2 DRY CHEM

==================  Accidental Release Measures  ==================

Spill Release Procedures:SOAK UP IN ABSORBANT MATERIAL OR SCRAPE UP.
    RESIDUAL CAN BE REMOVED WITH NON-FLAMMABLE SOLVENT SUCH AS
    METHYLENE CHLORIDE. IF SOLVENT IS USED ADEQ VENTIL IS REQUIRED.

======================	Handling and Storage  ======================

Handling and Storage Precautions:PRACTICE CAUTION TO AVOID SKIN AND EYE
    CONTACT. AVOID BREATHING VAPORS OF HEATED MATERIALS

=============  Exposure Controls/Personal Protection  =============

Ventilation:MECH TO MAINTAIN BELOW THE TLV.
Protective Gloves:YES
Eye Protection:SAFETY GLASSES W/SHIELDS
Other Protective Equipment:BARRIER CREAMS HELPFUL. CLEAN BODY COVERING
    CLOTHING.
Supplemental Safety and Health
SPEC:TY II.KEY1:F4.

==================  Physical/Chemical Properties  ==================

HCC:F4
Boiling Pt:B.P. Text:389F;198C
Spec Gravity:0.96
Solubility in Water:NEGLIGIBLE
Appearance and Odor:GRAY PASTE

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Conditions to Avoid Polymerization:EXCESS OF HARDENER.

====================  Disposal Considerations  ====================

Waste Disposal Methods:BURN IN ADEQUTE INCINERATOR OR BURY IN LADFILL
    ALL IAW FEDERAL, STATE AND LOCAL CODES.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***