=====================  Product Identification  =====================

MSDS NAME:S-1125 EPOXY ADHESIVE, PART B, EPOXY RESIN
NIIN:01-147-9957
MSDS Number: BGNXT
=== Responsible Party ===
Company:RAYCHEM CORPORATION
Emergency Phone Num:(415) 361-3333/4360
CAGE:06099
=== Contractor Identification ===
Company:RAYCHEM CORP
Address:300 CONSTITUTION DRIVE
Box:City:MENLO PARK
State:CA
ZIP:94025-1164
Country:US
Phone:415-361-4907
CAGE:06090
Company:RAYCHEM CORPORATION
Address:300 CONSTITUTION DRIVE
City:MENLO PARK
State:CA
ZIP:94025
Phone:(415)361-3333
CAGE:06099

=============  Composition/Information on Ingredients  =============

Name:EPICHLOROHYDRIN/BISPHENOL A TYPE EPOXY RESIN,MODIFIED.

Name:UNIDENTIFIED COMPONENT

=====================  Hazards Identification  =====================

Effects of Overexposure:SKIN/EYES:IRRIT.MAY DAMAGE EYE.MAY SENSITIZE
    SKIN ON RPTD CONTCT;INHAL/INGEST:IRRIT RESP SYS,DIZZ.

=======================  First Aid Measures  =======================

First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
    NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE MOUTH;
    GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR OTHER
    SYMPTOMS OF OVEREXPOSURE.

=====================  Fire Fighting Measures  =====================

Flash Point:NONE
Extinguishing Media:CO*2, FOAM, DRY CHEM.
Fire Fighting Procedures:WEAR SELF-CNTD BRTHG,APP H*20 SPRAY TO COOL
    CONTR.
Unusual Fire/Explosion Hazard:NONE NOTED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:USE APPROPRIATE PROTECTIVE EQUIP DURING CLEAN
    UP. COVER SPILLED MATL WITH ABSORBENT & SHOVEL INTO CONTAINER.
    CLEAN UP RESIDUE WITH SOAP AND WATER. DO NOT FLUSH TO SEWER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENTILATED
    AREA. PROTECT FROM PHYSICAL DAMAGE.AVOID ANY PHYSICAL CONTACT. KEEP
    CONTAINERS TIGHTLY CLOSED
Other Precautions:AVOID SKIN/EYES CONTACT.WASH HANDS THOROUGHLY AFTER
    USE/HANDLING.AVOID BREATHING LOW LEVEL VAP GIVEN OFF DURING
    ASSEMBLY & CURE & DUST FROM GRINDING/SANDING OPERATION.USE IN
    ADEQUATE VENTILN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE SHOULD BE NEEDED
Ventilation:NO SPECIAL REQUIREMENTS W ADEQUATE VENT.
Protective Gloves:RUBBER/PLASTIC
Eye Protection:SAFETY GLASSES
Other Protective Equipment:NORMAL WORK CLOTHING COVERING ARMS & LEGS.
Supplemental Safety and Health
MSDS FROM RAYCHEM CORP EFFECTIVE: MAY 1985;ITEM IS 2 PART
    PRODUCT.SUPPLD PREKD IN SEALED MIXING BAG.BOTH PART IN MIXING BAG
    ARE SEPARTD BY MEANS OF A CLIPPED ROD;THIS IS PART B,EPOXY
    RESIN.KEY1:N1.

==================  Physical/Chemical Properties  ==================

HCC:N1
Spec Gravity:1.33
Solubility in Water:SLIGHT
Appearance and Odor:VISCOUS BLACK PASTE WITH SLIGHT ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
ACIDS, BASES
Stability Condition to Avoid:HEAT, IGNITION SOURCES
Hazardous Decomposition Products:BURNING PROCESS OXIDES OF CARBON AND
    AMMONIA

====================  Disposal Considerations  ====================

Waste Disposal Methods:KEEP IN COVERED DRUMS,PENDING DISPOSAL. HANDLE &
    DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
    INTERNATIONAL,FEDERAL,STATE, & LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***