===================== Product Identification =====================
MSDS NAME:KIT 82-A3 (SCOTCHCAST 4) PART A
NIIN:00-810-1513
Kit Part:Y
MSDS Number: BGTPC
=== Responsible Party ===
Company:MINNESOTA MINING & MFG CO ADHESIVES & SEALERS DIV.
Address:3M CENTER
City:ST. PAUL
State:MN
ZIP:55144-1000
Country:US
Info Phone Num:612-733-5454
Emergency Phone Num:612-733-5454
CAGE:76381
=== Contractor Identification ===
Company:3M MINNESOTA MINING AND MFG CO ADHESIVES SEALERS DIV
Address:3M CTR
Box:City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:800-364-3577/651-737-6501(24 HOURS)
CAGE:04963
Company:MINNESOTA MINING AND MFG CO, DBA 3M
Address:3M CENTER BLDG 224-5S-04
Box:City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:866-556 5712 / 612-733-1110
CAGE:76381
Company:RICHMOND ELECTRIC SUPPLY CO. INC.
Address:1732 KELLY ROAD
Box:26526
City:RICHMOND
State:VA
ZIP:23261
Country:US
Phone:804-353-2511
CAGE:4Y801
============= Composition/Information on Ingredients =============
Name:EPOXY RESIN
CAS:25068-38-6
RTECS #:KC2100000
Fraction by Wt: 100%
Other REC Limits:NONE SPECIFIED
===================== Hazards Identification =====================
LD50 LC50 Mixture:LD50 > 5000 MG/KG (RAT)
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:IRRITATING TO EYES,SKIN ON DIRECT
CONTACT WITH MIXTURE OF PART A & PART B OR EITHER PART SEPARATELY.
PART-A IS NON-TOXIC ORALLY.
Effects of Overexposure:IRRITATION.
Medical Cond Aggravated by Exposure:MAY CAUSE SKIN SENSITIZATION IN
SUSCEPTIBLE INDIVIDUALS.
======================= First Aid Measures =======================
First Aid:EYE:FLUSH EYES WITH LARGE AMOUNTS OF WATER & CONTINUE FOR AT
LEAST 15 MINUTES; SKIN:WASH AFFECTED AREA THOROUGHLY WITH SOAP &
WATER; INH:IF COUGHING,WHEEZING OR SHORTNESS OF BREATH,PROVIDE
FRESH AIR; ING:GIVE ONE TO TWO GLASSES OF WATER & INDUCE VOMITING.
===================== Fire Fighting Measures =====================
Flash Point Method:CC
Flash Point:>230F/110C
Extinguishing Media:CO*2,FOAM,DRY CHEMICAL.
Fire Fighting Procedures:FIREFIGHTERS SHOULD BE EQUIPPED WITH
SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:NONE.
================== Accidental Release Measures ==================
Spill Release Procedures:USE ABSORBENT MATERIAL AS NEEDED & SWEEP UP.
====================== Handling and Storage ======================
Handling and Storage Precautions:AVOID CONTACT. AVOID PROLONGED
BREATHING OF VAPOR.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USUALLY NONE.
Ventilation:NORMAL VENTILATION.
Protective Gloves:RECOMMENDED.
Eye Protection:SAFETY GLASSES.
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
HCC:N1
Spec Gravity:1.14
Solubility in Water:MIL
Appearance and Odor:CLEAR AMBER LIQUID.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NONE STATED.
Stability Condition to Avoid:NONE STATED.
Hazardous Decomposition Products:CO,CO*2 & OXIDES OF NITROGEN.
==================== Disposal Considerations ====================
Waste Disposal Methods:SEND FULLY ABSORBED MATERIAL FOR LANDFILL IN
ACCORDANCE WITH LOCAL,STATE & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD ***