=====================  Product Identification  =====================

MSDS NAME:TILE TITE
NIIN:00F004998
MSDS Number: BBRMT
=== Responsible Party ===
Company:APPLIED POLYMER OF AMERICA, INC/CLIFTON, NJ 07015
Emergency Phone Num:(201) 473-4640
CAGE:APPLI
=== Contractor Identification ===
Company:APPLIED POLYMER OF AMERICA, INC/CLIFTON, NJ 07015
CAGE:APPLI

=============  Composition/Information on Ingredients  =============

Name:AROMATIC ISOCYANATE PREPOLYMER ADDUCT
Fraction by Wt: >30%
ACGIH TLV:0.02 PPM

Name:AROMATIC HYDROCARBON
Fraction by Wt: <5%

=====================  Hazards Identification  =====================

Effects of Overexposure:CONTACT WITH SKIN & EYES IS IRRITATING

=======================  First Aid Measures  =======================

First Aid:IN CASE OF CONTACT, IMMEDIATELY FLUSH EYES AND SKIN WITH
    LARGE VOLUMES OF WATER. REMOVE CONTAMINATED CLOTHING. IF INGESTED,
    DO NOT INDUCE VOMITING. CALL PHYSICIAN OR OBTAIN EMERGENCY
    TREATMENT, PARTIC ULARLY FOR EYES.

=====================  Fire Fighting Measures  =====================

Flash Point:180F (COC)
Extinguishing Media:CO2 OR DRY CHEMICALS
Fire Fighting Procedures:USE OF SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:VENTILATE AREA. REMOVE ALL SOURCES OF
    IGNITION. TREAT WITH COMMERCIAL OIL ABSORBING ODUCT. PLACE INTO
    SUITABLE STEEL CONTAINER. FLUSH AREA WITH SOLUTION OF  AMMONIA, 10%
    ISOPROPANOL ALCOHOL AND WATER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT TAKE INTERNALLY, SKIN AND EYE
    CONTACT SHOULD BE AVOIDED.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:PRODUCT TO BE USED IN VENT AREA, IF NECESSARY,
    USE AIR SUPPLIED MASK
Ventilation:PROVIDE LOCAL EXHAUST VENTILATION TO KEEP BELOW TLV.
Protective Gloves:COTTON/RUBBER
Eye Protection:SAFETY GLASSES
Other Protective Equipment:STANDARD WORK CLOTHING/PROTECTIVE SKIN CREAM
    ARE RECOMMENDED
Supplemental Safety and Health
MSDS DATE: SEP 20-83.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:NONE
Vapor Pres:1
Spec Gravity:1.07
Evaporation Rate & Reference:(N-BUAC=1): <1.0
Solubility in Water:NEGLIG.
Appearance and Odor:BLACK PASTE, MILD HYDROCARBON ODOR
Percent Volatiles by Volume:<5.0

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
WATER, ALCOHOL, ALIPHATIC SOLVENTS
Stability Condition to Avoid:AVOID HIGH TEMPERATURES IN STORAGE
Hazardous Decomposition Products:BURNING MATERIAL MAY PRODUCE OXIDES OF
    NITROGEN.
Conditions to Avoid Polymerization:CO, CO, ETC.

====================  Disposal Considerations  ====================

Waste Disposal Methods:CAN ALSO BE ALLOWED TO CURE, THEN SCRAPED,
    PEELED OR CAN BE RE-COATED. DISPOSE IN ACCORDANCE WITH LOCAL, STATE
    AND FEDERAL REGULATIONS. DO NOT INCINERATE.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***