===================== Product Identification =====================
MSDS NAME:78032 & 79018 SCHAFFER SUPREME WAX
NIIN:00F009061
MSDS Number: BGZHG
=== Responsible Party ===
Company:SCHAFFER MACHINE CO.,INC
Address:BOSTON POST RD.
City:CLINTON
State:CT
ZIP:06413
Info Phone Num:(203) 669-6000
Emergency Phone Num:(203) 669-6000
CAGE:24269
=== Contractor Identification ===
Company:SCHAFFER MACHINE CO.,INC
Address:BOSTON POST RD.
Box:City:CLINTON
State:CT
ZIP:06413
Phone:(203) 669-6000
CAGE:24269
============= Composition/Information on Ingredients =============
Name:PARAFFIN WAX
CAS:8002-74-2
RTECS #:RV0350000
OSHA PEL:2 MG/M3 (FUME)
ACGIH TLV:2 MG/M3 (FUME); 9192
===================== Hazards Identification =====================
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: NO HEALTH HAZARD.
======================= First Aid Measures =======================
First Aid:SKIN: POUR COLD WATER ON AREA OF CLOTHING OR SKIN WHERE HOT
WAX HAS HAD CONTACT. CONSULT DOCTOR.
===================== Fire Fighting Measures =====================
Flash Point Method:COC
Flash Point:>350F
Extinguishing Media:CO2, FOAM, DRY CHEMICAL, WATER SPRAY.
Fire Fighting Procedures:WATER SPRAY, DON'T USE HOSE OR STREAM OF
WATER.
================== Accidental Release Measures ==================
Spill Release Procedures:IF MELTED, CONFINE & ALLOW TO SOLIDIFY. THEN
SCRAPE OFF FLOOR OR OTHER SURFACE.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP TEMPERATURE <250F WHEN USING.
SLIGHT OXIDATION OF WAX WILL CAUSE IT TO YELLOW.
Other Precautions:STORE AT ROOM TEMPERATURE/NOT >80F.
============= Exposure Controls/Personal Protection =============
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:170F
Spec Gravity:0.92
Solubility in Water:NONE
Appearance and Odor:OFF WHITE, VERY SLIGHT NATURAL WAX ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:NOT REACTIVE
Conditions to Avoid Polymerization:DON'T HEAT WAX >250F. NOT REACTIVE
==================== Disposal Considerations ====================
Waste Disposal Methods:DUMP
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|