===================== Product Identification =====================
MSDS NAME:CAAPCOAT AS-P108 ANTISTATIC
NIIN:00-459-1756
Kit Part:Y
MSDS Number: BHFYQ
=== Responsible Party ===
Company:CAAP CO INC
Address:152 PEPES FARM RD
City:MILFORD
State:CT
ZIP:06460-3670
Country:US
Info Phone Num:203-877-0375
Emergency Phone Num:203-877-0375
CAGE:60922
=== Contractor Identification ===
Company:CAAP CO INC
Address:152 PEPE'S FARM RD
Box:City:MILFORD
State:CT
ZIP:06460
Country:US
Phone:203-877-0375
CAGE:60922
============= Composition/Information on Ingredients =============
Name:PIGMENTED POLYURETHANE PREPOLYMER VEHICLE
Name:TOLUENE (SARA III)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: <1%
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS:1330-20-7
RTECS #:ZE2100000
OSHA PEL:100 PPM/150 STEL
ACGIH TLV:100 PPM/150STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Effects of Overexposure:OVEREXPOSURE CAN CAUSE TDI SENSITIZATION &/OR
RESPIRATORY TREE SPASMS, LACHYRAM-ATION.
Medical Cond Aggravated by Exposure:PERSONS SENSITIVE TO ALLERGIES OR
ASTHMATICS SHOULD NOT USE TDI FORMULATIONS.
======================= First Aid Measures =======================
First Aid:SKIN/EYE: FLUSH WITH FLOWING WATER FOR 15 MINS. SEE A
PHYSICIAN IMMEDIATELY. INHAL: REMOVE TO FRESH AIR, SEE A
PHYSICIAN IMMEDIATELY. INGST: DO NOT INDUCE
VOMITING, SEE A PHY SICIAN IMMEDIATELY.
===================== Fire Fighting Measures =====================
Flash Point Method:OC
Flash Point:95F/35C
Extinguishing Media:CO2, FOAM, DRY CHEMICAL
Unusual Fire/Explosion Hazard:MATERIAL IS FLAMMABLE & SHOULD BE USED
ONLY IN PRESENCE OF ADEQUATE VENTILATION.
================== Accidental Release Measures ==================
Spill Release Procedures:NEUTRALIZE WITH 10% SODIUM HYDROXIDE, MOP UP
RESI-DUE WEARING PROTECTIVE EQUIPMENT AND FLUSH RESIDUEWITH WATER.
Neutralizing Agent:SODIUM HYDROXIDE
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN COOL DRY PLACE, NOT ABOVE
100F.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:BUREAU OF MINES APPROVED FULL FACE MASK
RESPIRATOR FOR TOXIC DUSTS WITH AN ACTIVATED CARBON CANISTER.
Ventilation:LOCAL EXHAUST OR MECHANICAL
Protective Gloves:LATEX RUBBER
Eye Protection:SAFETY GOGGLES
Supplemental Safety and Health
KEY1:F4. KIT CONSISTS OF EIGHT PARTS. PART ONE HAS PNI A, PART TWO HAS
PNI B, PART THREE HAS PNI C ... THROUGH PNI H, SAME NSN.
================== Physical/Chemical Properties ==================
HCC:F3
Boiling Pt:B.P. Text:NA
Vapor Pres:NA
Vapor Density:NA
Solubility in Water:NONE
Appearance and Odor:BLACK PUNGENT LIQUID
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NK
Hazardous Decomposition Products:FREE ISOCYANATES, CARBON MONOXIDE,
OXIDES OF NITROGEN, HYDROGEN CYANIDE
==================== Disposal Considerations ====================
Waste Disposal Methods:BURN COMPLETELY AFTER NEUTRALIZING WITH 10%
SODIUMHYDROXIDE, IN ACCCORDANCE WITH FEDERA, STATE, AND LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|