===================== Product Identification =====================
MSDS NAME:CAAPCOAT B-274,BLK POLYRTHN RAIN EROSION CT
NIIN:00-459-1756
Kit Part:Y
MSDS Number: BHFYR
=== Responsible Party ===
Company:CAAP CO INC
Address:152 PEPES FARM RD
Box:2066
City:MILFORD
State:CT
ZIP:06460-3670
Country:US
Info Phone Num:203-877-0375
Emergency Phone Num:203-877-0375
Preparer's Name:RONALD D. ARENA
CAGE:60922
=== Contractor Identification ===
Company:CAAP CO INC
Address:152 PEPE'S FARM RD
Box:City:MILFORD
State:CT
ZIP:06460
Country:US
Phone:203-877-0375
CAGE:60922
============= Composition/Information on Ingredients =============
Name:XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS:1330-20-7
RTECS #:ZE2100000
OSHA PEL:100 PPM/150 STEL
ACGIH TLV:100 PPM/150STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:METHYL ISOBUTYL KETONE (SARA III)
CAS:108-10-1
RTECS #:SA9275000
OSHA PEL:100 PPM/75 STEL
ACGIH TLV:50 PPM/75 STEL; 9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:URETHANE POLYMER (TRADE SECRET)
Name:METHYLENE BIS(4-CYCLOHEXYLISOCYANATE)
CAS:5124-30-1
RTECS #:NQ9250000
Fraction by Wt: <0.1%
OSHA PEL:C, 0.01 PPM
ACGIH TLV:0.005 PPM; 9192
Name:CARBON BLACK
CAS:1333-86-4
RTECS #:FF5800000
OSHA PEL:3.5 MG/M3
ACGIH TLV:3.5 MG/M3; 9192
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: CONTACT MAY DAMAGE EYES; SKIN
IRRITANT. INHALATION RESPIRATORY IRRITANT. CHRONIC:
REPEATED/PROLONGED EXPOSURE MAY CAUSE OF DEFATTING OF SKIN &
DERMATITUS& POSSIBLE SENSITIZATION. INHAL: OF HIGH CONCENTRATIONS
ABOVE TLV'S MAY CAUSENEURAL IMPAIRMENT OR LIVER EFFECT.
Effects of Overexposure:VAPOR EXPOSURE: BURNING EYES, HEADACHE,
DIZZINESS, THROAT IRRITATION, LOSS OF APPETITE, AND NAUSEA.
CONTACT: MAY
CAUSE IRRITATION OF SKIN, B URNING OF SKIN OR EYES.
Medical Cond Aggravated by Exposure:PREEXISTING ALLERGIES, ASTHMA, EYE
& SKIN DISORDERMAY BE AGGRAVATED.
======================= First Aid Measures =======================
First Aid:EYE: FLUSH WITH MUCH WATER & CALL PHYSICIAN.
SKIN: WASH WITH SOAP AND WATER, REMOVE
CONTAMINATED CLOTHING. INHAL: REMOVE TO FRESH
AIR, GIVE ARTIFIC IAL RESPIRATION IF NECESSARY & CALL APHYSICIAN.
INGST: DO NOT INDUCE VOMITING, CALL A PHYSICIAN
===================== Fire Fighting Measures =====================
Flash Point Method:TOC
Flash Point:68F/20C
Lower Limits:1
Upper Limits:8
Extinguishing Media:CO2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:USUAL METHODS FOR FLAMMABLE LIQUIDS. NOT
MISCIBLE WITH WATER, ALTHOUGH WATER MAYBE USED TO COOL FIRE EXPOSED
CONTAINERS.
Unusual Fire/Explosion Hazard:NONE
================== Accidental Release Measures ==================
Spill Release Procedures:KEEP IGNITION SOURCES AWAY. CONTAIN
W/ABSORBANT MATERIAL. USE PROTECTIVE EQUIPMENT. CLEAN UP
ABSORBANT AND CONTAIN SECURELY. SWEEP & WET MOP WITH SOAP AND
WATER.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP IGNITION SOURCES AWAY. KEEP
CLOSED WHEN NOT IN USE. KEEP AREA CLEAN. STORE BELOW 100F.
Other Precautions:AVOID CONTACT WITH SKIN, EYES, AND CLOTHING. IF
SPRAYING, DO NOT BREATH MIST.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:ORGANIC VAPOR CANNISTER MASK OR S.C.B.A. FOR
EMERGENCIES
Ventilation:LOCAL EXHAUST PREFERRED; MECHANICAL ACCEPTABLE
SPECIAL SPRAY BOOTH IS RECOMMENDED FOR SPRAY
Protective Gloves:NEOPRENE OR POLYETHYLENE
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:RUBBER OR POLYETHYLENE APRON. RUBBER BOOTS
FOR SPILLS
Work Hygienic Practices:WASH W/SOAP & WATER AFTER HANDLING. CONTACT
LENSES NOT RECOMMENDED FOR SOLVENTS SINCE EYE INJURY MAY
RESULT.
Supplemental Safety and Health
KEY1:F3. KIT CONSISTS OF EIGHT PARTS. PART ONE HAS PNI A, PART TWO HAS
PNI B, PART THREE HAS PNI C ... THROUGH PNI H, SAME NSN.
================== Physical/Chemical Properties ==================
HCC:F3
Boiling Pt:B.P. Text:241-275F
Melt/Freeze Pt:M.P/F.P Text:NA
Vapor Pres:21
Vapor Density:3.6
Spec Gravity:0.960
Evaporation Rate & Reference:0.8
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK AROMATIC LIQUID
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:IGNITION SOURCES, HOT SURFACES, AND
TEMPERATURES ABOVE 100F
Hazardous Decomposition Products:UNDER FIRE CONDITIONS, OXIDES OF
CARBON AND NITROGEN, POSSIBLE HCN AS WITH ANY NITROGEN COMPOUNDS.
==================== Disposal Considerations ====================
Waste Disposal Methods:INCINERATION PREFERRED. RCRA HAZARDOUS IGNITABLE
WASTE. DISPOSE OF ACCORDING TO FEDERAL, STATE, ANDLOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|