===================== Product Identification =====================
MSDS NAME:FORMULA 279 STEAM CLEANER
NIIN:00N010004
MSDS Number: BHNMF
=== Responsible Party ===
Company:STATE CHEMICAL MANUFACTURING CO.
Address:3100 HAMILTON AVENUE
City:CLEVELAND
State:OH
ZIP:44114
Info Phone Num:216-861-7114
Emergency Phone Num:216-861-7114
CAGE:53798
=== Contractor Identification ===
Company:STATE CHEMICAL MANUFACTURING CO.
Address:3100 HAMILTON AVENUE
Box:City:CLEVELAND
State:OH
ZIP:44114-3701
Country:US
Phone:216-861-7114
CAGE:53798
============= Composition/Information on Ingredients =============
Name:SODIUM HYDROXIDE (SARA III)
CAS:1310-73-2
RTECS #:WB4900000
Fraction by Wt: <10%
Other REC Limits:N/K
OSHA PEL:2 MG/M3
ACGIH TLV:C 2 MG/M3; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:SODIUM METASILICATE
CAS:6834-92-0
Fraction by Wt: <3%
Other REC Limits:N/K
OSHA PEL:N/K
ACGIH TLV:N/K
===================== Hazards Identification =====================
LD50 LC50 Mixture:N/K
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CORROSIVE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES/SKIN/INGESTION/INHALATION:CORROSIVE TO
SKIN,EYES,AND BODY TISSUES.AS A RESULT IT IS HARMFUL IF SWALLOWED.
Medical Cond Aggravated by Exposure:N/K
======================= First Aid Measures =======================
Eyes:FLUSH EYES WITH PLENTY OF WATER FOR AT LEAST 15 MIN.GET
MED ATTENTION IMMED.CONTACT LENSES SHOULD NOT BE WORN WHEN WORKING
WITH THIS PRODUCT.SKIN:IMMED FLUSH WELL WITH WATER.GET MED
ATTN.INGEST:G IVE LGE AMTS OF H*2O TO DILUTE THE SODIUM
HYDROXIDE.DO NOT INDUCE VOMIT.GET MED ATTN IMMED.NEVER GIVE
ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON.INHAL:REMOVE TO FRESH
AIR IMMED.GET MED ATTENTION.
===================== Fire Fighting Measures =====================
Flash Point Method:TCC
Flash Point:NONE
Lower Limits:N/K
Upper Limits:N/K
================== Accidental Release Measures ==================
Spill Release Procedures:VENTILATE AREA OF SPILL.FLUSH WITH WATER AND
NEUTRALIZE TO BELOW PH 12.5 IF NEEDED.
Neutralizing Agent:N/K
====================== Handling and Storage ======================
Handling and Storage Precautions:DO NOT STORE BELOW FREEZING
TEMPS.CORROSIVE LIQUID-HANDLE CAREFULLY.DO NOT REUSE DRUM WHEN
EMPTY.CONTAINS ALKALI.MAY CAUSE BURNS.AVOID (SEE SUPP DATA)
Other Precautions:N/K
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL AND GENERAL VENTILATION NECESSARY TO KEEP AIR
CONCENTRATION BELOW TLV .
Protective Gloves:REQUIRED.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:SOURCE OF CLEAN WATER SHOULD BE IN WORK AREA
IN CASE OF ACCIDENTAL EYE CONTACT.
Work Hygienic Practices:DO NOT WEAR CONTACT LENSES WHILE WORKING WITH
THIS PRODUCT.
Supplemental Safety and Health
HNDLG/STOR PREC:CONTACT WITH SKIN.EYES AND CLOTHING.WASH THOROUGHLY
AFTER HANDLING.NOT FOR USE ON ALUMINUM.NOT FOR PRESSURE WASHER
APPLICATIONS.READ AND FOLLOW ALL LABEL PRECAUTIONS.FOR INDUSTRIAL
USE ONLY.KEEP OUT OF REACH OF CHILDREN.% VOLAT BY WT:80.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:220F,104.4C
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:N/K
Vapor Density:N/K
Spec Gravity:1.20 (WATER=1)
pH:>12.5
Evaporation Rate & Reference:N/K
Solubility in Water:COMPLETE
Appearance and Odor:A CLEAR COLORLESS LIQUID WITH A MILD ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
ALUMINUM SURFACES,STRONG ACIDS,FLAMMABLE LIQUIDS AND ORGANIC HALOGEN
COMPOUNDS (ESPECIALLY TRICHLOROETHYLENE).ALUMINUM.
Stability Condition to Avoid:N/K
Hazardous Decomposition Products:NONE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|