=====================  Product Identification  =====================

MSDS NAME:UNION-GARD 160
NIIN:00N010051
MSDS Number: BHNND
=== Responsible Party ===
Company:PACIFIC STANDARD CHEMICAL CO.,INC.
Box:2796
City:GLOBE
State:AZ
ZIP:85502
Info Phone Num:602-425-5538
Emergency Phone Num:602-425-5538
CAGE:HO524
=== Contractor Identification ===
Company:PACIFIC STANDARD CHEMICAL CO.,INC.
Box:2796
City:GLOBE
State:AZ
ZIP:85502
Phone:602-425-5538
CAGE:HO524

=============  Composition/Information on Ingredients  =============

Name:HYDROCARBON
Other REC Limits:N/K 
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:EMULSIFIERS
Other REC Limits:N/K 
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:FILM FORMERS
Other REC Limits:N/K 
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:TER-POLYMER
Other REC Limits:N/K 
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:THICKNER
Other REC Limits:N/K 
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:WATER
CAS:7732-18-5
RTECS #:ZC0110000
Other REC Limits:N/K 
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:N/K 
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SEE SIGNS AND SYMPTOMS OF
    OVEREXPOSURE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES:N/K .SKIN:PROLONGED OR REPEATED SKIN
    CONTACT COULD CAUSE SLIGHT SKIN IRRITATION.INGESTION:N/K
    .INHALATION:N/K .
Medical Cond Aggravated by Exposure:N/K 

=======================  First Aid Measures  =======================

Eyes:FLUSH WITH WATER FOR AT LEAST 15 MINUTES.SKIN:FLUSH WITH
    WATER.INGESTION:CALL MD IMMEDIATELY .INHALATION:REMOVE TO FRESH
    AIR.SUPPORT BREATHING (GIVE O*2/ARTIFICIAL RESPIRATION) .

=====================  Fire Fighting Measures  =====================

Lower Limits:N/K 
Upper Limits:N/K 
Extinguishing Media:CO*2 OR DRY CHEMICAL MAY BE USED ON FIRES WHERE
    MATERIAL IS STORED.
Fire Fighting Procedures:PRODUCT RESISTS SUSTAINED COMBUSTION BY
    RELEASING A STEAM BLANKET.
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:ABSORB WITH SAWDUST,DIATOMACEOUS EARTH OR
    OTHER ABSORBENT MATERIAL.DISPOSE OF IN APPROVED WASTE DISPOSAL
    FACILITY.
Neutralizing Agent:N/K 

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE AWAY FROM EXTREME HEAT.
Other Precautions:N/K 

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN .
Ventilation:LOCAL AND GENERAL VENTILATION NECESSARY TO KEEP AIR
    CONCENTRATION BELOW LEVEL OF CONCERN .
Protective Gloves:NONE REQUIRED
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:N/K 
Work Hygienic Practices:N/K 
Supplemental Safety and Health
ENVIRONMENTAL IMPACT:NEGLIGIBLE IN RELATION TO SUBSURFACE SANDS & FRESH
    WATER ZONES.COLLOIDS IN EMULSION PREVENT FILTRATION AT AMBIENT TEMP
    & ACT W/ GELLANT TO RESIST SEEPAGE.PORTIONS CONTACTING WATER  OR
    MOISTURE FORM OUTER LAYER OF "WALL CAKE",PREVENTING WATER
    PENETRATION INTO HOLE & MIGRATION OF MATL INTO THE EARTH.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:169F,76.11C
Melt/Freeze Pt:M.P/F.P Text:N/K 
Decomp Temp:Decomp Text:N/K 
Vapor Pres:N/K 
Vapor Density:2.4,AIR=1
Spec Gravity:1.1 (WATER=1)
Evaporation Rate & Reference:<1 (ETHER=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:LIGHT GRAY,OPAQUE LIQUID,ALIPHATIC ODOR.
Percent Volatiles by Volume:10

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:EXTREME TEMPERATURES MAY CAUSE PRESSURE
    BUILD UP IN STORAGE CONTAINERS.
Hazardous Decomposition Products:NONE
Conditions to Avoid Polymerization:WILL NOT OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
    FEDERAL,STATE AND LOCAL REGULATIONS .

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***