===================== Product Identification =====================
MSDS NAME:HARDENER HV 953
NIIN:00F005583
MSDS Number: BBSTZ
=== Responsible Party ===
Company:CIBA-GEIGY CORP REN PLASTICS DIV
Address:4917 DAWN AVE
City:EAST LANSING
State:MI
ZIP:48823-5605
Country:US
Info Phone Num:517-351-5900
Emergency Phone Num:800-888-8372
Preparer's Name:PETER HENIGE
CAGE:02684
=== Contractor Identification ===
Company:CIBA SPECIALTY CHEMICALS CORPORATION
Address:4917 DAWN AVE
Box:City:EAST LANSING
State:MI
ZIP:48823-5691
Country:US
Phone:517-351-5900
CAGE:02684
============= Composition/Information on Ingredients =============
Name:N,N-DIMETHYLDIPROPYLTRIAMINE *93-1*
CAS:10563-29-8
Name:POLYAMIDE OF C18 FATTY ACID PRIMERS & TETA; POLYAMIDE RESIN
*93-1*
CAS:68410-23-1
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN/EYES: IRRITATION & CORROSIVE,
BURNS.
Explanation of Carcinogenicity:NONE
Medical Cond Aggravated by Exposure:SKIN & EYE CONDITIONS
======================= First Aid Measures =======================
Eyes: FLUSH W/WATER FOR AT LEAST 15 MINS. SKIN: WASH W/SOAP &
WATER. INGESTION: IF CONSCIOUS, GIVE PLENTY OF WATER TO DRINK.
DON'T INDUCE VOMITING. INHALATION: REMOVE TO FRESH AIR. GIVE OXYGEN
& ARTIF ICIAL RESPIRATION IF NEEDED. REFERRAL TO PHYSICIAN IS
RECOMMENDED IF THERE IS ANY QUESTION ABOUT SERIOUSNESS OF ANY
INJURY. OBTAIN MEDICAL ATTENTION IN ALL CASES.
===================== Fire Fighting Measures =====================
Flash Point Method:PMCC
Flash Point:>248F
Extinguishing Media:CO2, DRY CHEMICAL, FOAM, WATER
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:DECOMPOSITION & COMBUSTION PRODUCTS MAY
BE TOXIC.
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE SPILLAGE BY ABSORBING IN ABSORBENT
MATERIAL.
====================== Handling and Storage ======================
Handling and Storage Precautions:DON'T GET IN EYES/ON SKIN/OR ON
CLOTHING. AVOID BREATHING VAPOR/MIST. KEEP CONTAINER CLOSED. USE
W/ADEQUATE VENTILATION.
Other Precautions:NUISANCE DUST MAY BE GENERATED WHEN SANDING OR SAWING
CURED MATERIAL. DANGER-THIS PRODUCT IS CORROSIVE.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE NIOSH APPROVED ORGANIC VAPOR CARTRIDGE
RESPIRATOR WHEN VAPOR/MIST EXPOSURE IS LIKELY.
Ventilation:GENERAL MECHANICAL/LOCAL EXHAUST: IN ACCORDANCE W/ACGIH
RECOMMENDATIONS.
Protective Gloves:IMPERMEABLE
Eye Protection:SPLASH-PROOF CHEMICAL GOGGLES
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING. REMOVE/LAUNDER
CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Spec Gravity:0.9-1
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR AMBER LIQUID, WITH AMMONIACAL ODOR.
Percent Volatiles by Volume:<1
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS & BASES
Stability Condition to Avoid:EXCESSIVE HEAT FOR PROLONGED PERIODS OF
TIME
Hazardous Decomposition Products:COMBUSTION MAY FORM TOXIC MATERIALS,
SUCH AS CO2, CO.
==================== Disposal Considerations ====================
Waste Disposal Methods:CONSULT QUALIFIED LOCAL OR CORPORATE PERSONNEL
FOR METHOD THAT WILL COMPLY W/LOCAL, STATE & FEDERAL HEALTH &
ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|