=====================  Product Identification  =====================

MSDS NAME:WHITE PEEL I-674
NIIN:00F005585
MSDS Number: BBSVC
=== Responsible Party ===
Company:FRANKLIN PAINTING SUPPLY/GRAND BLANC, MI 48439
Emergency Phone Num:(313) 232-5040
CAGE:22589
=== Contractor Identification ===
Company:FRANKLIN PAINTING SUPPLY/GRAND BLANC, MI 48439
CAGE:22589

=============  Composition/Information on Ingredients  =============

Name:TITANIUM DIOXIDE
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 2%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293

Name:TOLUENE  (SARA III)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: 36%
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:METHYL ETHYL KETONE (2-BUTANONE) (MEK)  (SARA III)
CAS:78-93-3
RTECS #:EL6475000
Fraction by Wt: 36%
OSHA PEL:200 PPM/300 STEL
ACGIH TLV:200 PPM/300STEL 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

=====================  Hazards Identification  =====================

Effects of Overexposure:CONTINUOUS INHALATION MAY CAUSE NARCOTIC
    EFFECT.

=======================  First Aid Measures  =======================

First Aid:SKIN: REMOVE DRY FILM & WASH W/SOAP & WATER, IF IRRITATION
    PERSISTS, GET MEDICAL ATTENTION. EYES; INGESTION & INHALATION: GET
    MEDICAL ATTENTION. NOTE: MAIN INGREDIENTS: PVC COPOLYMER DISSOLVED
    IN SOLV ENTS.

=====================  Fire Fighting Measures  =====================

Flash Point:32F COC
Lower Limits:1.8%
Upper Limits:11.5
Extinguishing Media:CO2, FOAM
Fire Fighting Procedures:TREAT SIMILARLY TO INFLAMMABLE PAINTS &
    VARNISHES.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WAIT TILL FILM DRIES (IN ABOUT 20 MINUTES)
    THEN REMOVE. MAKE SURE NO FLAME OR SPARK  NEARBY.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE AWAY FROM ANY SOURCE OF HEAT OR
    OPEN FLAME. STORE BETWEEN 40-90F.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:CHEMICAL CARTRIDGE RESPIRATORS
Ventilation:MECHANICAL: ADEQUATE
Protective Gloves:RUBBER
Eye Protection:GOGGLES
Other Protective Equipment:NONFLAMMABLE COVERALLS
Supplemental Safety and Health
MSDS UNDATED

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:175F
Vapor Pres:70.
Vapor Density:2.5
Spec Gravity:.90
Evaporation Rate & Reference:(BU AC = 1) 4.6
Solubility in Water:NONE
Appearance and Odor:WHITE/SLIGHTLY VISCOUS PRODUCT/SOLV LIKE ODOR.
Percent Volatiles by Volume:72.0

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
WATER & STRONG OXIDIZING AGENTS
Stability Condition to Avoid:EXPOSURE TO HEAT
Hazardous Decomposition Products:OXIDIZING AGENTS MAY CAUSE EXCESSIVE
    HEAT & FIRE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATION.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***