===================== Product Identification =====================
MSDS NAME:56C KIT HARDENER, PART A
NIIN:00F005581
MSDS Number: BBSTW
=== Responsible Party ===
Company:DEXTER CORP/OLEAN, NY 14760
Emergency Phone Num:(716) 372-6300
CAGE:04347
=== Contractor Identification ===
Company:DEXTER CORP DEXTER ELECTRONIC MATERIALS DIV
Address:15051 E DON JULIAN RD
Box:City:LA PUENTE
State:CA
ZIP:91746
Country:US
Phone:818-968-6511
CAGE:12405
Company:DEXTER CORP THE DEXTER ELECTRONIC MATERIAL DIV
Address:211 FRANKLIN ST.
Box:City:OLEAN
State:NY
ZIP:14760-1297
Country:US
Phone:716-372-6300/6309
CAGE:04347
============= Composition/Information on Ingredients =============
Name:POLYAMINE ADDUCT
Fraction by Wt: 40%
ACGIH TLV:1 PPM
===================== Hazards Identification =====================
Effects of Overexposure:THIS AMINE IS A STRONG SENSITIZER WHICH CAN
CAUSE SEVERE IRRITATION. AVOID DIRECT SKIN CONTACT.
======================= First Aid Measures =======================
First Aid:SKIN & EYE: WASH IMMEDIATELY WITH SOAP AND WATER.
===================== Fire Fighting Measures =====================
Flash Point:215F
Extinguishing Media:CO2, FOAM, OR DRY CHEMICAL
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE
================== Accidental Release Measures ==================
Spill Release Procedures:SCRAPE UP - TRANSFER TO METAL CONTAINER.
STICKY RESIDUE MAY BE WASHED WITH WATER.
====================== Handling and Storage ======================
Handling and Storage Precautions:AVOID DIRECT SKIN CONTACT. STORE AWAY
FROM HEAT TO PREVENT PHYSICAL SEPARATION OF COMPONENTS.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:AIR MASK IF IN CONFINED AREA.
Ventilation:LOCAL EXHAUST & MECHANICAL; PREFERABLE
Protective Gloves:RUBBER/PLASTIC
Eye Protection:SAFETY GLASSES/GOGGLES
Supplemental Safety and Health
MSDS UNDATED
================== Physical/Chemical Properties ==================
Spec Gravity:1.5
Solubility in Water:PARTIAL
Appearance and Odor:STRONG AMMONIA ODOR, TAN, HIGH VISCOSITY LIQUID
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Hazardous Decomposition Products:NITROUS OXIDE, CO
Conditions to Avoid Polymerization:STRONG ACIDS OR LARGE AMOUNTS OF
EPOXY RESIN.
==================== Disposal Considerations ====================
Waste Disposal Methods:BURY IN SANITARY LANDFILL IN ACCORDANCE WITH
FEDERAL, STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|