===================== Product Identification =====================
MSDS NAME:95750, 95751/9576801 TRIAD VLC DENTURE BASE
NIIN:00F010686
MSDS Number: BHTBP
=== Responsible Party ===
Company:DENTSPLY/YORK DIVISION
Address:570 W. COLLEGE AVENUE
City:YORK
State:PA
ZIP:17405
Info Phone Num:(717) 845-7511
Emergency Phone Num:(717) 845-7511
CAGE:16969
=== Contractor Identification ===
Company:DENTSPLY INTERNATIONAL INC
Address:570 WEST COLLEGE AVENUE
City:YORK
State:PA
ZIP:17405
Phone:(717) 845-7511
CAGE:8T797
Company:DENTSPLY/YORK DIV/TRUBYTE DIV
Address:570 W COLLEGE AVE
Box:872
City:YORK
State:PA
ZIP:17405-0872
Country:US
Phone:717-845-7511
CAGE:16969
============= Composition/Information on Ingredients =============
Name:ACRYLIC MONOMER
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: BARELY PERCEPTIBLE
IRRITATION OF THE MUCOUS MEMBRANES. SKIN: IRRITATION & MILD
SENSITIZATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: BARELY PERCEPTIBLE IRRITATION OR
THE MUCOUS MEMBRANES. SKIN: IRRITATION & SENSITIZATION.
Medical Cond Aggravated by Exposure:SENSITIZATION
======================= First Aid Measures =======================
Eyes: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINUTES. GET
MED ATTN. SKIN: WASH W/SOAP & WATER. REMOVE CONTAMINATED CLOTHING.
===================== Fire Fighting Measures =====================
Extinguishing Media:WATER FOG, FOAM, CO2
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE
================== Accidental Release Measures ==================
Spill Release Procedures:SPREAD OUT MATERIALS TO EXPOSE SURFACES TO
SUNLIGHT OR ARTIFICIAL LIGHT UNTIL SOLID.
====================== Handling and Storage ======================
Handling and Storage Precautions:REFRIGERATED STORAGE PROLONGS SHELF
LIFE. THIS MATERIAL SHOULD BE HANDLED & USED ONLY IN A MANNER
CONSISTENT W/THE PRODUCT INSTRUCTIONS.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE DUST MASK OR EXHAUST TO AVOID DUST FROM
GRINDING POLYMERIZED MATERIAL.
Ventilation:PROVIDE LOCAL EXHAUST WHEN GRINDING POLYMERIZED MATERIAL.
Protective Gloves:NONE
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Vapor Pres:<1
Vapor Density:>1
Spec Gravity:1.2
Solubility in Water:NEGLIGIBLE
Appearance and Odor:FIBERED & UNFIBERED PINK SHEETS & ROPES.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
OXIDIZING & REDUCING CHEMICALS
Stability Condition to Avoid:HEAT & IGNITION SOURCES
Hazardous Decomposition Products:NONE
Conditions to Avoid Polymerization:POLYMERIZES IN TWO HOURS AT 100C
W/LOW EXOTHERM.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF AS NONHAZARDOUS WASTE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|