=====================  Product Identification  =====================

MSDS NAME:SEALANT
NIIN:00F012136
MSDS Number: BJBSH
=== Responsible Party ===
Company:DEN-MAT CORPORATION
Address:3130 SKYWAY DRIVE, 501
City:SANTA MARIA
State:CA
ZIP:93455
Info Phone Num:(805) 922-8491
Emergency Phone Num:(805) 922-8491
CAGE:1GY68
=== Contractor Identification ===
Company:DEN-MAT CORPORATION
Address:3130 SKYWAY DRIVE, 501
Box:City:SANTA MARIA
State:CA
ZIP:93455
Phone:(805) 922-8491
CAGE:1GY68

=============  Composition/Information on Ingredients  =============

Name:AROMATIC/ALIPHATIC METHACRYLATES

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:NO	Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SKIN/EYES: IRRITANT.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN/EYES: IRRITANT.

=======================  First Aid Measures  =======================

Eyes: FLUSH W/WATER FOR AT LEAST 15 MINUTES & CONSULT
    PHYSICIAN. SKIN: WASH W/SOAP & WATER. INGESTION: INDUCE VOMITING &
    GET MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point:80C
Extinguishing Media:CHEMICAL FOAM, CO2, DRY CHEMICALS
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS
Unusual Fire/Explosion Hazard:HEAT CAN CAUSE RAPID ENERGY RELEASE & CAN
    RUPTURE CONTAINER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ABSORB MATERIAL WITH ABSORBENT TOWEL.

=============  Exposure Controls/Personal Protection  =============

Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:212C
Spec Gravity:1.114
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR, YELLOW, OILY LIQUID, MILD SWEET ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
REDUCING/OXIDIZING AGENTS, BLUE & UV LIGHT
Stability Condition to Avoid:HEAT & IGNITION SOURCE
Hazardous Decomposition Products:CO
Conditions to Avoid Polymerization:HEAT CAN CAUSE RAPID ENERGY RELEASE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE ACCORDING TO GOVERNMENT REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***