===================== Product Identification =====================
MSDS NAME:UTILITY WAX (SHEETS, STICKS, PADS)
NIIN:00-764-5219
MSDS Number: BJCQN
=== Responsible Party ===
Company:KERR MFG CO/DIV OF SYBRON CORP
Address:28200 WICK ROAD
City:RAMULUS
State:MI
ZIP:48174
Info Phone Num:(313) 946-7800
Emergency Phone Num:(313) 946-7800
CAGE:FO905
=== Contractor Identification ===
Company:KERR CORP
Address:1717 W COLLINS AVENUE
Box:City:ORANGE
State:CA
ZIP:92867-5422
Country:US
Phone:800-537-7187
CAGE:33339
Company:KERR MFG CO/DIV OF SYBRON CORP
Address:28200 WICK ROAD
City:ROMULUS
State:MI
ZIP:48174
Phone:(313) 946-7800
CAGE:FO905
============= Composition/Information on Ingredients =============
Name:VICTORY WAX, SUN WAX 1290, AMBER WAX
CAS:8002-74-2
RTECS #:RV0350000
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: WAX FUMES MAY CAUSE EYE,
NOSE & RESPIRATORY IRRITATION. SKIN: MOLTEN WAX SHOULD BE TREATED
AS A THERMAL BURN.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: WAX FUMES MAY CAUSE EYE, NOSE &
RESPIRATORY IRRITATION. SKIN: MOLTEN WAX SHOULD BE TREATED AS A
THERMAL BURN.
======================= First Aid Measures =======================
First Aid:SKIN: MOLTEN WAX SHOULD BE TREATED AS A THERMAL BURN. HOT
LIQUID WAX TENDS TO CLING TO FLESH, ESPECIALLY AFTER SOLIDIFYING;
IT SHOULD BE COOLED AS QUICKLY AS POSSIBLE USING, FOR EXAMPLE, COLD
TAP WATE R.
===================== Fire Fighting Measures =====================
Flash Point Method:COC
Flash Point:500F
Extinguishing Media:CO2, FOAM, DRY CHEMICAL & WATER FOG.
Fire Fighting Procedures:WHEN FINELY DIVIDED & SUSPENDED IN AIR, THIS
PRODUCT COULD BE FLAMMABLE. IN THESE CIRCUMSTANCES, KEEP AWAY FROM
HEAT, SPRAKS & OPEN FLAME.
Unusual Fire/Explosion Hazard:NONE
================== Accidental Release Measures ==================
Spill Release Procedures:IF NOT LIQUID, ATTEMPT TO CONFINE SPILL & LET
WAX SOLIFY. ONCE SOLID, WAX MAYBE RECOVERED AS ANY OTHER MATERIAL.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE AT NORMAL ROOM TEMPERAURE &
HUMIDITY. USE ACCORDING TO DIRECTIONS.
Other Precautions:AVOID BREATHING HOT WAX VAPORS.
============= Exposure Controls/Personal Protection =============
Ventilation:ADEQUATELY VENTILATED ROOMS MUST BE USED WHEN WAX IS MELTED
FOR NORMAL DENTAL PURPOSES.
Protective Gloves:NONE UNDER NORMAL USE
Eye Protection:NONE UNDER NORMAL USE
Other Protective Equipment:NONE UNDER NORMAL USE
Work Hygienic Practices:AVOID BREATHING HOT WAX VAPORS.
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Spec Gravity:0.93
Evaporation Rate & Reference:NIL
Appearance and Odor:SHEETS, STICKKS OR RODS
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS, LIQUID CHLORINE, SODIUM HYPOCHLORITE, ETC.
Stability Condition to Avoid:STORE AT NORMAL ROOM TEMPERATURE &
HUMIDITY. STORE AWAY FROM OPEN FLAME.
Hazardous Decomposition Products:WAX FUMES
==================== Disposal Considerations ====================
Waste Disposal Methods:BURN IN APPROVED INCINERATOR OR PLACE IN
APPROVED LANDFILL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|