===================== Product Identification =====================
MSDS NAME:ACRYLIC MONOMER
NIIN:01-229-1616
MSDS Number: BJCTV
=== Responsible Party ===
Company:UNITEK CORPORATION
Address:2724 SOUTH PECK ROAD
City:MONROVIA
State:CA
ZIP:91016
Info Phone Num:(818) 574-4000
Emergency Phone Num:(818) 574-4000
CAGE:90444
=== Contractor Identification ===
Company:UNITEK CORPORATION
Address:2724 S PECK RD
Box:City:MONROVIA
State:CA
ZIP:91016-5005
Phone:(213) 445-7960
CAGE:90444
============= Composition/Information on Ingredients =============
Name:METHYL METHACRYLATE (SARA III)
CAS:80-62-6
RTECS #:OZ5075000
OSHA PEL:100 PPM
ACGIH TLV:100 PPM; 9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: DROWSINESS, HEADACHES,
IRRITATION OF THE NOSE, THROAT, & EYES, & UNCONSCIOUSNESS. SKIN:
PROLONGED & REPEATED MAY CAUSE RASH.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: DROWSINESS, HEADACHES, IRRITATION
OF THE NOSE, THROAT, & EYES, & UNCONSCIOUSNESS. SKIN: PROLONGED &
REPEATED MAY CAUSE RASH.
Medical Cond Aggravated by Exposure:IMPAIRED PULMONARY FUNCTION, SKIN
DISORDERS & RASH.
======================= First Aid Measures =======================
Eyes: FLUSH W/LARGE AMOUNTS OF WATER. INHALATION: MOVE TO
FRESH AIR. IF BREATHING HAS STOPPED, PERFORM ARTIFICIAL
RESPIRATION. INGESTION: INDUCE VOMITING. GET MED ATT.
===================== Fire Fighting Measures =====================
Flash Point Method:CC
Flash Point:50F
Extinguishing Media:DRY CHEMICAL, ALCOHOL FOAM, CO2
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE ALL IGNITION SOURCES, VENTILATE AREA,
COVER W/ABSORBENT, VERMICULITE, & COLLECT IN SUITABLE CONTAINER.
====================== Handling and Storage ======================
Handling and Storage Precautions:INHIBITORS CONTAINED IN THIS MATERIAL
DON'T FUNCTION IN THE ABSENCE OF AIR, THEREFORE INERT GAS BLANKETS
SHOULDN'T BE USED.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:FOR CONCENTRATION LEVELS OF 1000 PPM OR LESS
CHEMICAL CARTRIDGE RESPIRATOR W/FULL FACEPIECE & ORGANIC VAPOR
CARTRIDGES IS REQUIRED.
Ventilation:MECHANICAL/LOCAL EXHAUST: REQUIRED IF TLV ARE EXCEEDED.
Eye Protection:FACESHIELD
Other Protective Equipment:PROTECTIVE CLOTHING
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:212F
Vapor Pres:35
Vapor Density:3.6
Spec Gravity:0.95
Evaporation Rate & Reference:(BU AC = 1): 3.1
Solubility in Water:SLIGHT
Appearance and Odor:CLEAR, PINK TINTED LIQUID, W/ACRID FRUITY ODOR
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NITRATES, STRONG OXIDIZERS & ALKALIES, ACIDS
Hazardous Decomposition Products:TOXIC GASES, VAPORS
Conditions to Avoid Polymerization:HEAT MAY CAUSE VIOLENT
POLYMERIZATION.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, &
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|