===================== Product Identification =====================
MSDS NAME:3400 SPRED STAIN LATEX WALL PAINT-PURE WHITE
NIIN:00F012936
MSDS Number: BJGTB
=== Responsible Party ===
Company:GLIDDEN COMPANY
Address:925 EUCLID AVENUE
City:CLEVELAND
State:OH
ZIP:44115
Country:US
Info Phone Num:216-344-8000 OR 1-800-545-2643
Emergency Phone Num:216-344-8000 OR 1-800-545-2643
CAGE:01PD6
=== Contractor Identification ===
Company:GLIDDEN CO MEMBER OF ICI WORLD PAINTS
Address:925 EUCLID AVE
Box:15049
City:CLEVELAND
State:OH
ZIP:44115
Country:US
Phone:216-344-8000
CAGE:72818
Company:GLIDDEN PAINT, ICI PAINTS NORTH AMERICA
Address:925 EUCLID AVE
Box:City:CLEVELAND
State:OH
ZIP:44115
Country:US
Phone:800-545-2643/216-344-8207
CAGE:01PD6
============= Composition/Information on Ingredients =============
Name:ALUMINUM SILICATE ANHYDROUS *92-4*
CAS:22708-90-3
Fraction by Wt: 5-10%
Name:SODIUM ALUMINOSILICATE *92-4*
CAS:1344-00-9
Fraction by Wt: 1-5%
Name:TALC (POWDER), (ASBESTOS FREE), TALCUM; HYDROUS MAGNESIUM
SILICATE
CAS:14807-96-6
RTECS #:WW2710000
Fraction by Wt: 10-20%
OSHA PEL:20 MPPCF
ACGIH TLV:2 MG/CUM (RESP DUST)
Name:DIETHYLENE GLYCOL BUTYL ETHER ACETATE, ETHANOL, 2-
(2-BUTOXYETHOXY), BUTYL CARBITOL ACETATE
CAS:124-17-4
RTECS #:KJ9275000
Fraction by Wt: 1-5%
Name:TITANIUM DIOXIDE, TIO2
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 5-10%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293
Name:VINYL ACRYLIC COPOLYMER
Fraction by Wt: 5-10%
Name:WATER
CAS:7732-18-5
RTECS #:ZC0110000
Fraction by Wt: 40-50%
Name:WEIGHT PER GALLON IN POUNDS: 11.38
RTECS #:9999999WG
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: IRRITATION OF RESPIRATORY
TRACT. SKIN/EYES: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: DIZZINESS &/OR LIGHTHEADEDNESS,
HEADACHE, NAUSEA, CENTRAL NERVOUS SYSTEM DEPRESSION, RESPIRATORY
PROBLEMS.
======================= First Aid Measures =======================
First Aid:INHALATION: REMOVE TO FRESH AIR. RESTORE/SUPPORT BREATHING.
HAVE TRAINED PERSON GIVE OXYGEN IF NECESSARY. SKIN: FLUSH W/WATER.
THEN WASH THOROUGHLY W/SOAP & WATER. EYES: FLUSH W/PLENTY OF WATER
FOR AT LEAST 15 MINS. INGESTION: OBTAIN MEDICAL ATTENTION IN ALL
CASES.
===================== Fire Fighting Measures =====================
Flash Point Method:SCC
Extinguishing Media:DRY CHEMICAL, FOAM
Fire Fighting Procedures:WATER MAY BE USED TO COOL & PROTECT EXPOSED
CONTAINERS.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY BURST IF EXPOSED TO
EXTREME HEAT OR FIRE.
================== Accidental Release Measures ==================
Spill Release Procedures:VENTILATE AREA. COLLECT SPILLS W/ABSORBENT
MATERIALS. EVACUATE AREA. LARGE SPILLS: SHUT OFF LEAK IF SAFE TO DO
SO. DIKE & CONTAIN SPILL. PUMP TO STORAGE OR SALVAGE VESSELS. USE
ABSORBENT TO PICK UP EX CESS RESIDUE.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE BELOW 100F. KEEP FROM FREEZING.
USE ONLY W/ADEQUATE VENTILATION. DON'T TAKE INTERNALLY. KEEP
CONTAINERS TIGHTLY CLOSED & UPRIGHT WHEN NOT IN USE
Other Precautions:KEEP OUT OF REACH OF CHILDREN. AVOID CONTACT W/SKIN,
EYES & BREATHING OF VAPORS. AVOID CONDITIONS WHICH RESULT IN
FORMATION OF INHALABLE PARTICLES SUCH AS SPRAYING OR ABRADING,
SANDING, PAINTED SURFAC ES. EMPTY CONTAINERS MAY CONTAIN RESIDUE
============= Exposure Controls/Personal Protection =============
Respiratory Protection:WHERE RESPIRATORY PROTECTION IS REQUIRED, USE
ONLY NIOSH/MSHA APPROVED RESPIRATORS.
Ventilation:PROVIDE DILUTION VENTILATION OR LOCAL EXHAUST TO PREVENT
BUILD-UP OF VAPORS.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES, GOGGLES
Other Protective Equipment:EYE WASH, SAFETY SHOWER.
Work Hygienic Practices:WASH HANDS AFTER HANDLING, BEFORE EATING,
SMOKING. REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
DISPOSE OF CONTAMINATED LEATHER ITEMS, SUCH AS SHOES & BELTS.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:212-455F
Spec Gravity:1.366
Appearance and Odor:WHITE LIQUID
Percent Volatiles by Volume:68.94
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
OXIDIZERS
Stability Condition to Avoid:ELEVATED TEMPERATURES, FREEZING
Hazardous Decomposition Products:CO, CO2
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE IN ACCORDANCE W/ALL APPLICABLE
REGULATIONS. AVOID DISCHARGE TO NATURAL WATERS. KEEP SALVAGEABLE
MATERIAL & RINSE WATER OUT OF SEWERS & WATER COURSES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|