Thermal Ceramics
MATERIAL SAFETY DATA SHEET
MSDS No: 201 Date Prepared: 10/01/1985 Current Date: 12/1/2006
Last Revised: (12/01/2006)
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Product Group: REFRACTORY CERAMIC FIBER PRODUCT
Chemical Name: VITREOUS ALUMINOSILICATE FIBER
Synonyms: RCF, ceramic fiber, synthetic vitreous fiber (SVF),
man-made vitreous fiber (MMVF), man-made mineral fiber (MMMF)
Trade Names: Kaowool®; Cerafiber®; Cerachem®; Uni-Bloc®; Saber-Bloc®; Quad-Bloc�;
Pyro-Fold®; Ultrafelt®; Pyro-Blanket®; Pyro-Log�; Cerablanket®; Z-Blok®;
Isoblanket®; Pyro-Bloc®: Blanket, Modules, Strips, Bulk, Packing, Insulation, Shapes,
Rope, Engineered Fiber, Heat Treated Blanket (all grades)
Cer-Wool® HP, HTZ, HTA, Utility: Blanket, Bulk
Cer-Wool® RT: Blanket, Bulk
PREFLEX® HP, HTZ Module
PREMAX® HP, HTZ, HTA Module
MONOMAXâ„? Modules, Blanket
Manufacturer/Supplier: Thermal Ceramics Inc.
P. O. Box 923; Dept. 300
Augusta, GA 30903-0923
For Product Stewardship and Emergency Information -
Hotline: 1-800-722-5681
Fax: 706-560-4054
For additional MSDSs and to confirm this is the most current MSDS for the
product, visit our web page [www.thermalceramics.com].
2. COMPOSITION / INFORMATION ON INGREDIENTS
COMPONENTS CAS NUMBER % BY WEIGHT
Refractories, Fibers, Aluminosilicate 142844-00-6 40 - 100
Water 7732-18-5 0 - 60
(See Section 8 "Exposure Controls / Personal Protection" for exposure guidelines)
3. HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
WARNING!
POSSIBLE CANCER HAZARD BY INHALATION.
(See Section 11 for more information)
Page 1 Of 9
MSDS No: 201 Date Prepared: 10/01/1985 Current Date: 12/1/2006
Last Revised: (12/01/2006)
CHRONIC EFFECT
There has been no increased incidence of respiratory disease in studies examining occupationally exposed workers. In
animal studies, long term laboratory exposure to doses hundreds of times higher than normal occupational exposures
has produced fibrosis, lung cancer and mesothelioma in rats or hamsters. The fibers used in those studies were
specially sized to maximize rodent respirability.
OTHER POTENTIAL EFFECTS
TARGET ORGANS:
Respiratory Tract (nose and throat), Eyes, Skin
RESPIRATORY TRACT (nose and throat) IRRITATION:
If inhaled in sufficient quantity, may cause temporary, mild mechanical irritation to respiratory tract. Symptoms may include
scratchiness of the nose or throat, cough or chest discomfort.
EYE IRRITATION:
May cause temporary, mild mechanical irritation. Fibers may be abrasive; prolonged contact may cause damage to the outer
surface of the eye.
SKIN IRRITATION:
May cause temporary, mild mechanical irritation. Exposure may also result in inflammation, rash or itching.
GASTROINTESTINAL IRRITATION:
Unlikely route of exposure.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE:
Pre-existing medical conditions, including dermatitis, asthma or chronic lung disease may be aggravated by exposure;
individuals who have a history of allergies may experience greater amounts of skin and respiratory irritation.
HAZARD CLASSIFICATION
Although studies, involving occupationally exposed workers, have not identified any increased incidence of respiratory
disease, results from animal testing have been used as the basis for hazard classification. In each of the following
cases, the conclusions are qualitative only and do not rest upon any quantitative analysis suggesting that the hazard
actually may occur at current occupational exposure levels.
The International Agency for Research on Cancer (IARC) confirmed in October 2001 that Group 2B (possible human
carcinogen based on sufficient evidence of carcinogenicity in animals but inadequate evidence in humans) continues to be the
appropriate classification for refractory ceramic fiber.
The Seventh Annual Report on Carcinogens (1994), prepared by the National Toxicology Program (NTP), classified
respirable RCF and glasswool as substances reasonably anticipated to be carcinogens.
The American Conference of Governmental Industrial Hygienists (ACGIH) has classified RCF as “A2-Suspected Human
Carcinogen.�
The Commission of The European Communities (DG XI) has classified RCF as a substance "that should be regarded as if
it is carcinogenic to man."
The State of California, pursuant to Proposition 65, The Safe Drinking Water and Toxic Enforcement Act of 1986, has listed
"ceramic fibers (airborne fibers of respirable size)" as a chemical known to the State of California to cause cancer.
The Canadian Environmental Protection Agency (CEPA) has classified RCF as "probably carcinogenic" (Group 2).
The Canadian Workplace Hazardous Materials Information System (WHMIS) � RCF is classified as Class D2A - Materials
Causing Other Toxic Effects.
The Hazardous Materials Identification System (HMIS) �
Health 1* Flammability 0 Reactivity 0 Personal Protection Index: X (Employer Determined)
(* denotes potential for chronic effects)
Page 2 Of 9
MSDS No: 201 Date Prepared: 10/01/1985 Current Date: 12/1/2006
Last Revised: (12/01/2006)
4. FIRST AID MEASURES
RESPIRATORY TRACT (nose and throat) IRRITATION:
If respiratory tract irritation develops, move the person to a dust free location. See Section 8 for additional measures to
reduce or eliminate exposure.
EYE IRRITATION:
If eyes become irritated, flush immediately with large amounts of lukewarm water for at least 15 minutes. Eyelids
should be held away from the eyeball to ensure thorough rinsing. Do not rub eyes.
SKIN IRRITATION:
If skin becomes irritated, remove soiled clothing. Do not rub or scratch exposed skin. Wash area of contact
thoroughly with soap and water. Using a skin cream or lotion after washing may be helpful.
GASTROINTESTINAL IRRITATION:
If gastrointestinal tract irritation develops, move the person to a dust free environment.
- If the above symptoms persist, seek medical attention. -
NOTES TO PHYSICIANS:
Skin and respiratory effects are the result of temporary, mild mechanical irritation; fiber exposure does not result in
allergic manifestations.
5. FIRE FIGHTING MEASURES
NFPA Codes: Flammability: 0 Health: 1 Reactivity: 0 Special: 0
NFPA Unusual Hazards: None
Flammable Properties: None
Flash Point: None
Hazardous Decomposition Products: None
Unusual Fire and Explosion Hazard: None
Extinguishing Media: Use extinguishing media suitable for type of surrounding fire
6. ACCIDENTAL RELEASE MEASURES
SPILL PROCEDURES
Avoid creating airborne dust. Dust suppressing cleaning methods such as wet sweeping or vacuuming should be used
to clean the work area. If vacuuming, the vacuum should be equipped with a HEPA filter. Compressed air or dry
sweeping should not be used for cleaning.
7. HANDLING AND STORAGE
STORAGE
Store in original container in a dry area. Keep container closed when not in use.
HANDLING
Handle ceramic fiber carefully. Limit use of power tools unless in conjunction with local exhaust. Use hand tools
whenever possible. Frequently clean the work area with HEPA filtered vacuum or wet sweeping to minimize the
accumulation of debris. Do not use compressed air for clean-up.
EMPTY CONTAINERS
Product packaging may contain residue. Do not reuse.
Page 3 Of 9
MSDS No: 201 Date Prepared: 10/01/1985 Current Date: 12/1/2006
Last Revised: (12/01/2006)
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
EXPOSURE GUIDELINES
MAJOR COMPONENT OSHA PEL MANUFACTURER’S REG.
Refractories, Fibers, Aluminosilicate None Established* 0.5 f/cc, 8-hr. TWA**
* There is no specific regulatory standard for RCF in the U.S. OSHA’s “Particulate Not Otherwise Regulated (PNOR)� standard
3 3
[29 CFR 1910.1000, Subpart Z, Air Contaminants] applies generally - Total Dust 15 mg/m ; Respirable Fraction 5 mg/m .
** The Refractory Ceramic Fibers Coalition (RCFC) has sponsored comprehensive toxicology and epidemiology studies to
identify potential RCF-related health effects [see Section 11 for more details], consulted experts familiar with fiber and particle
science, conducted a thorough review of the RCF-related scientific literature, and further evaluated the data in a state-of-the-
art quantitative risk assessment. Based on these efforts and in the absence of an OSHA PEL, RCFC has adopted a
recommended exposure guideline (REG), as measured under NIOSH Method 7400 B. The manufacturers� REG is intended
to promote occupational health and safety through feasible exposure controls and reductions as determined by extensive
industrial hygiene monitoring efforts undertaken voluntarily and pursuant to an agreement with the U.S. Environmental
Protection Agency.
OTHER OCCUPATIONAL EXPOSURE LEVELS (OEL)
RCF-related occupational exposure limits vary internationally. Regulatory OEL examples include: Australia � 0.5 f/cc;
Austria � 0.5 f/cc; Canada � 0.5 to 1.0 f/cc; Denmark � 1.0 f/cc; France � 0.6 f/cc; Germany � 0.5 f/cc (0.25 f/cc for
new installations); Netherlands � 1.0 f/cc; New Zealand � 1.0 f/cc; Norway � 2.0 f/cc; Poland � 2.0 f/cc; Sweden � 1.0
f/cc; United Kingdom � 2.0 f/cc. Non-regulatory OEL examples include: ACGIH TLV � 0.2 f/cc; RCFC REG � 0.5 f/cc.
The objectives and criteria underlying each of these OEL decisions also vary. The evaluation of occupational exposure
limits and their relative applicability to the workplace is best performed, on a case-by-case basis, by a qualified Industrial
Hygienist.
ENGINEERING CONTROLS
Use feasible engineering controls such as local exhaust ventilation, point of generation dust collection, down draft work
stations, emission controlling tool designs, and materials handling equipment designed to minimize airborne fiber
emissions.
PERSONAL PROTECTION EQUIPMENT
Respiratory Protection � RCF:
When engineering and/or administrative controls are insufficient to maintain workplace exposures within the 0.5 f/cc
REG, the use of appropriate respiratory protection, pursuant to the requirements of OSHA Standards 29 CFR
1910.134 and 29 CFR 1926.103, is recommended. The following information is provided as an example of appropriate
respiratory protection for aluminosilicate fibers. The evaluation of workplace hazards and the identification of
appropriate respiratory protection is best performed, on a case-by-case basis, by a qualified Industrial Hygienist.
MANUFACTURER’S RESPIRATORY PROTECTION RECOMMENDATIONS
WHEN HANDLING RCF PRODUCTS
Respirable Airborne Fiber Concentration Respirator Recommendation 1
Not yet determined but expected to be below 5.0 f/cc based on Half-face, air-purifying respirator equipped with a NIOSH-
operation certified P100 particulate filter cartridge.
"Reliably" less than 0.5 f/cc See recommendation below for individual worker requests.
0.5 f/cc � 5.0 f/cc Half-face, air-purifying respirator equipped with a NIOSH �
certified P100 particulate filter cartridge.
5.0 f/cc � 25 f/cc Full-facepiece, air-purifying respirator equipped with a NIOSH �
certified P100 particulate filter cartridge or PAPR.
Greater than 25 f/cc PAPR with tight-fitting full facepiece or a supplied air respirator
in continuous flow mode.
When individual workers request respiratory protection as a A NIOSH-certified respirator, such as a disposable particulate
matter of personal comfort or choice and exposures are respirator or respirators with filter cartridges rated N95 or better.
"reliably" below 0.5 f/cc (8-hr.,TWA)
Page 4 Of 9
MSDS No: 201 Date Prepared: 10/01/1985 Current Date: 12/1/2006
Last Revised: (12/01/2006)
Note: The P100 recommendation is a conservative default choice; in some cases, solid arguments can be made
1
that other respirator types (e.g., N95, R99, etc.) may be suitable for some tasks or work environments. The P100
recommendation is not designed to limit informed choices, provided that respiratory protection decisions
comply with 29 CFR 1910.134.
Other Information:
â™? Concentrations based upon an eight-hour time weighted average (TWA) as determined by air samples collected
and analyzed pursuant to NIOSH method 7400 (B) for airborne fibers.
â™? The manufacturer recommends the use of a full-facepiece, air purifying respirator equipped with an appropriate
particulate filter cartridge during furnace tear-out events and the removal of used RCF to control exposures to
airborne fiber and the potential presence of crystalline silica. If exposure levels are known, the respiratory
protection chart provided above may be applied.
â™? Potential exposure to other airborne contaminants should be evaluated by a qualified Industrial Hygienist for the
selection of appropriate respiratory protection and air monitoring.
â™? In the absence of other objective data or when concentrations are unknown, the manufacturer recommends the
use of a half-face, air-purifying respirator equipped with a NIOSH-certified P-100 particulate filter cartridge (See
above note).
Skin Protection:
Wear gloves (e.g. cotton), head coverings and full body clothing as necessary to prevent skin irritation. Washable or
disposable clothing may be used. If possible, do not take unwashed work clothing home. If soiled work clothing must
be taken home, employers should ensure employees are trained on the best practices to minimize or avoid non-work
dust exposure (e.g., vacuum clothes before leaving the work area, wash work clothing separately, rinse washer before
washing other household clothes, etc.).
Eye Protection:
Wear safety glasses with side shields or other forms of eye protection in compliance with appropriate OSHA standards
to prevent eye irritation. The use of contact lenses is not recommended, unless used in conjunction with appropriate
eye protection. Do not touch eyes with soiled body parts or materials. If possible, have eye-washing facilities readily
available where eye irritation can occur.
9. PHYSICAL AND CHEMICAL PROPERTIES
ODOR AND APPEARANCE: White, odorless, fibrous material
CHEMICAL FAMILY: Vitreous Aluminosilicate Fibers
BOILING POINT: Not Applicable
WATER SOLUBILITY (%): Not Soluble in Water
MELTING POINT: 1760° C (3200° F)
SPECIFIC GRAVITY: 2.50 � 2.75
VAPOR PRESSURE: Not Applicable
pH: Not Applicable
VAPOR DENSITY (Air = 1): Not Applicable
% VOLATILE: Not Applicable
MOLECULAR FORMULA: Not Applicable
10. STABILITY AND REACTIVITY
CHEMICAL STABILITY: Stable under conditions of normal use
INCOMPATIBILITY: None
CONDITIONS TO AVOID: None
HAZARDOUS DECOMPOSITION PRODUCTS: None
HAZARDOUS POLYMERIZATION: Not Applicable
Page 5 Of 9
MSDS No: 201 Date Prepared: 10/01/1985 Current Date: 12/1/2006
Last Revised: (12/01/2006)
11. TOXICOLOGICAL INFORMATION
HEALTH DATA SUMMARY:
Epidemiological studies that include most people who have ever worked in domestic RCF production have indicated no
increased incidence of respiratory disease or other significant health effects in occupationally exposed workers. In
animal studies, long-term, high-dose inhalation exposure resulted in the development of respiratory disease in rats and
hamsters.
EPIDEMIOLOGY:
The University of Cincinnati is conducting an ongoing epidemiologic investigation. The evidence obtained from
employees in U. S. RCF manufacturing facilities is as follows:
1) There is no evidence of any fibrotic lung disease (interstitial fibrosis) from evaluations of chest X-rays.
2) There is no evidence of an elevated incidence of lung disease among RCF manufacturing employees.
3) In early studies an apparent statistical “trend� within the exposed population was observed between RCF exposure
duration and some measures of lung function. The observations were clinically insignificant. If these observations were
made on an individual employee, the results would be interpreted as being within the normal (predicted) respiratory
range. A more recent longitudinal study of employees with 5 or more pulmonary function tests refutes the earlier
observations, finding no effect on lung function associated with RCF production experience. Initial data (circa 1987)
seemed to indicate an interactive effect between smoking and RCF exposure; more recent data, however, found no
interactive effect. Nevertheless, to promote good health, RCF employees are still actively encouraged not to smoke.
4) Pleural plaques (thickening along the chest wall) have been observed in a small number of RCF employees. Some
studies appear to show a relationship between the occurrence of pleural plaques on chest radiographs and the following
variables: (a) years since RCF production hire date; (b) duration of RCF production employment; and (c) cumulative
RCF exposure. The best evidence to date indicates that pleural plaques are a marker of exposure only. Pleural
plaques are not associated with pulmonary impairment. The pathogenesis of pleural plaques remains incompletely
understood; however, the mechanism appears to be an inflammatory response caused by inhaled fibers.
TOXICOLOGY:
A number of toxicological studies designed to identify any potential health effects from RCF exposure have been
completed. In one study, conducted by the Research and Consulting Company, (Geneva, Switzerland), rats and
hamsters were exposed to 30 mg/m³ (about 200 fibers/cc) of specially-prepared RCF for 6 hours/day, 5 days/week, for
up to 24 months. In rats, a statistically significant increase in lung tumors was observed; two mesotheliomas (cancer of
the pleural lining between the chest wall and lung) were also identified. Hamsters did not develop lung tumors;
however, interstitial fibrosis and mesothelioma was found. Some, in the scientific community, have concluded that the
“maximum tolerated dose� was exceeded and that significant particle contamination was a confounding issue; therefore,
these study findings may not represent an accurate assessment of the potential for RCF to produce adverse health
effects.
In a related multi-dose study with a similar protocol, other rats were exposed to doses of 16 mg/m³, 9 mg/m³, 3 mg/m³
which corresponds to about 115, 75, and 25 fibers per cubic centimeter respectively. This study found no statistically
significant increase in lung cancer. Some cases of pleural and parenchymal fibrosis were seen in the 16 mg/m³ dose
group. Some cases of mild fibrosis and one mesothelioma were observed in the 9 mg/m³ group. No acute respiratory
effects were seen in the rats in the 3 mg/m³ exposure group, which suggests that there may be a dose/response
threshold, below which irreversible respiratory impacts do not occur.
Other toxicological studies have been conducted which utilized non-physiological exposure methods such as
intrapleural, intraperitoneal and intratracheal implantation or injection. Some of these studies have found that RCF is a
potential carcinogen. Some experts, however, suggest that these tests have limited relevance because they bypass
many of the biological mechanisms that prevent fiber deposition or facilitate fiber clearance.
To obtain more epidemiology or toxicology information, please call the toll free telephone number for the Thermal
Ceramics Product Stewardship Program found in Section 16 - Other Information.
Page 6 Of 9
MSDS No: 201 Date Prepared: 10/01/1985 Current Date: 12/1/2006
Last Revised: (12/01/2006)
12. ECOLOGICAL INFORMATION
No ecological concerns have been identified.
13. DISPOSAL CONSIDERATIONS
WASTE MANAGEMENT:
To prevent waste materials from becoming airborne during waste storage, transportation and disposal, a covered
container or plastic bagging is recommended.
DISPOSAL:
RCF, as manufactured, is not classified as a hazardous waste according to Federal regulations (40 CFR 261). As
manufactured, RCF was tested using EPA’s Toxicity Characteristic Leaching Procedure (TCLP). Results showed there
were no detectable contaminants or detectable leachable contaminants that exceeded the regulatory levels. Any
processing, use, alteration or chemical additions to the product, as purchased, may alter the disposal requirements.
Under Federal regulations, it is the waste generator's responsibility to properly characterize a waste material, to
determine if it is a "hazardous" waste. Check local, regional, state or provincial regulations to identify all applicable
disposal requirements.
14. TRANSPORT INFORMATION
U.S. DEPARTMENT OF TRANSPORTATION (DOT)
Hazard Class: Not Regulated United Nations (UN) Number: Not Applicable
Labels: Not Applicable North America (NA) Number: Not Applicable
Placards: Not Applicable Bill of Lading: Product Name
INTERNATIONAL
Canadian TDG Hazard Class & PIN: Not regulated
Not classified as dangerous goods under ADR (road), RID (train) or IMDG (ship).
15. REGULATORY INFORMATION
UNITED STATES REGULATIONS
EPA: Superfund Amendments and Reauthorization Act (SARA) Title III - This product does
not contain any substances reportable under Sections 302, 304, 313, (40 CFR 372).
Sections 311 and 312 (40 CFR 370) apply (delayed hazard).
Toxic Substances Control Act (TSCA) � RCF has been assigned a CAS number;
however, it is not required to be listed on the TSCA inventory.
Comprehensive Environmental Response, Compensation and Liability Act
(CERCLA) and the Clean Air Act (CAA) - RCF contains fibers with an average diameter
greater than one micron and thus is not considered a hazardous air pollutant.
OSHA: Comply with Hazard Communication Standards 29 CFR 1910.1200 and 29 CFR
1926.59 and the Respiratory Protection Standards 29 CFR 1910.134 and 29 CFR
1926.103.
California: Ceramic fibers (airborne particles of respirable size) is listed in Proposition 65, The Safe
Drinking Water and Toxic Enforcement Act of 1986 as a chemical known to the State
of California to cause cancer.
Other States: RCF products are not known to be regulated by states other than California; however,
state and local OSHA and EPA regulations may apply to these products. If in doubt,
contact your local regulatory agency.
Page 7 Of 9
MSDS No: 201 Date Prepared: 10/01/1985 Current Date: 12/1/2006
Last Revised: (12/01/2006)
INTERNATIONAL REGULATIONS
Canada: Canadian Workplace Hazardous Materials Information System (WHMIS) - RCF is
classified as Class D2A - Materials Causing Other Toxic Effects
Canadian Environmental Protection Act (CEPA) - All substances in this product are
listed, as required, on the Domestic Substances List (DSL)
European Union: European Directive 97/69/EC classified RCF as a Category 2 carcinogen; that is it
“should be regarded as if it is carcinogenic to man.�
16. OTHER INFORMATION
RCF DEVITRIFICATION:
As produced, all RCF fibers are vitreous (glassy) materials that do not contain crystalline silica. Continued exposure to
elevated temperatures may cause these fibers to devitrify (become crystalline). The first crystalline formation
(mullite) begins to occur at approximately 985° C (1805 ° F). Crystalline silica (cristobalite) formation may begin at
temperatures of approximately 1200° C (2192° F). T he occurrence and extent of crystalline phase formation is
dependent on the duration and temperature of exposure, fiber chemistry and/or the presence of fluxing agents. The
presence of crystalline phases can be confirmed only through laboratory analysis of the "hot face" fiber.
IARC’s evaluation of crystalline silica states “Crystalline silica inhaled in the form of quartz or cristobalite from
occupational sources is carcinogenic to humans (Group 1)� and additionally notes “in making the overall evaluation, the
Working Group noted that carcinogenicity in humans was not detected in all industrial circumstances studied.
Carcinogenicity may be dependent on inherent characteristics of the crystalline silica or on external factors affecting its
biological activity or distribution of its polymorphs.� (IARC Monograph Vol. 68, 1997). NTP lists all polymorphs of
crystalline silica (respirable size) amongst substances "known to be a human carcinogen�.
IARC and NTP did not evaluate after-service RCF, which may contain various crystalline phases. However, an analysis
of after-service RCF samples obtained pursuant to an exposure monitoring agreement with the EPA, found that in the
furnace conditions sampled, most did not contain detectable levels of crystalline silica. Other relevant RCF studies
found that (1) simulated after-service RCF showed little, or no, activity where exposure was by inhalation or by
intraperitoneal injection; and (2) after-service RCF was not cytotoxic to macrophage-like cells at concentrations up to
320 µg/cm2 - by comparison, pure quartz or cristobalite were significantly active at much lower levels (circa 20 µg/cm2).
RCF AFTER-SERVICE REMOVAL:
Respiratory protection should be provided in compliance with the Product Stewardship Program and OSHA standards.
During removal operations, a FULL FACE RESPIRATOR is recommended to reduce inhalation exposure along with eye
and respiratory tract irritation. A specific evaluation of workplace hazards and the identification of appropriate
respiratory protection is best performed, on a case-by-case basis, by a qualified industrial hygiene professional.
For more information, call the Thermal Ceramics Product Stewardship Hotline (800-722-5681).
PRODUCT STEWARDSHIP PROGRAM:
Morgan Thermal Ceramics has established a program to provide customers with up-to-date information regarding the
proper use and handling of RCF. In addition, Thermal Ceramics has established a program to monitor airborne fiber
concentrations at customer facilities. If you would like more information about this program, please call your local
supplier or visit one of the following web sites.
Thermal Ceramics - Global www.thermalceramics.com
Refractory Ceramic Fibers Coalition (USA) www.RCFC.net
ECFIA (Europe) www.ecfia.org
LABELING:
As product information labels may be required on RCF packages, check local destination regulations before shipping.
Page 8 Of 9
MSDS No: 201 Date Prepared: 10/01/1985 Current Date: 12/1/2006
Last Revised: (12/01/2006)
DEFINITIONS:
ACGIH: American Conference of Governmental Industrial Hygienists
ADR: Carriage of Dangerous Goods by Road (International Regulation)
CAA: Clean Air Act
CAS: Chemical Abstracts Service
CERCLA: Comprehensive Environmental Response, Compensation and Liability Act
DSL: Domestic Substances List
EPA: Environmental Protection Agency
EU: European Union
f/cc: Fibers per cubic centimeter
HEPA: High Efficiency Particulate Air
HMIS: Hazardous Materials Identification System
IARC: International Agency for Research on Cancer
IATA: International Air Transport Association
IMDG: International Maritime Dangerous Goods Code
mg/m³: Milligrams per cubic meter of air
mmpcf: Million particles per cubic meter
NFPA: National Fire Protection Association
NIOSH: National Institute for Occupational Safety and Health
OSHA: Occupational Safety and Health Administration
29 CFR 1910.134 & 1926.103: OSHA Respiratory Protection Standards
29 CFR 1910.1200 & 1926.59: OSHA Hazard Communication Standards
PEL: Permissible Exposure Limit (OSHA)
PIN: Product Identification Number
PNOC: Particulates Not Otherwise Classified
PNOR: Particulates Not Otherwise Regulated
PSP: Product Stewardship Program
RCFC: Refractory Ceramic Fibers Coalition
RCRA: Resource Conservation and Recovery Act
REG: Recommended Exposure Guideline (RCFC)
REL: Recommended Exposure Limit (NIOSH)
RID: Carriage of Dangerous Goods by Rail (International Regulations)
SARA: Superfund Amendments and Reauthorization Act
SARA Title III: Emergency Planning and Community Right to Know Act
SARA Section 302: Extremely Hazardous Substances
SARA Section 304: Emergency Release
SARA Section 311: MSDS/List of Chemicals and Hazardous Inventory
SARA Section 312: Emergency and Hazardous Inventory
SARA Section 313: Toxic Chemicals and Release Reporting
STEL: Short Term Exposure Limit
SVF: Synthetic Vitreous Fiber
TDG: Transportation of Dangerous Goods
TLV: Threshold Limit Value (ACGIH)
TSCA: Toxic Substances Control Act
TWA: Time Weighted Average
WHMIS: Workplace Hazardous Materials Information System (Canada)
Revision Summary:
Section 2 � Ingredients composition updated.
MSDS Prepared By:
THERMAL CERAMICS ENVIRONMENTAL, HEALTH & SAFETY DEPARTMENT
DISCLAIMER
The information presented herein is presented in good faith and believed to be accurate as of the effective date of this
Material Safety Data Sheet. Employers may use this MSDS to supplement other information gathered by them in their
efforts to assure the health and safety of their employees and the proper use of the product. This summary of the
relevant data reflects professional judgment; employers should note that information perceived to be less relevant has
not been included in this MSDS. Therefore, given the summary nature of this document, Thermal Ceramics does not
extend any warranty (expressed or implied), assume any responsibility, or make any representation regarding the
completeness of this information or its suitability for the purposes envisioned by the user.
Page 9 Of 9
|