Material Safety Data Sheet
Bemol #215 Suspension (concentrate)
PRODUCT IDENTIFICATION
Trade Name: Bemol #215 Suspension
Chemical Family: proprietary mixture, dry film suspension
Formula: proprietary mixture
Molecular Weight: N/A
CAS #: proprietary mixture
HAZARDOUS INGREDIENTS Ratio CAS
Tungsten Disulfide 15% min. 12138-09-9
Proprietary Resin Binder 5-10% N/A
Isopropyl Alcohol 15-20% 67-63-0
VMP Naptha 5-10% 8032-32-4
PHYSICAL DATA
Boiling Point: N/A
Melting Point: N/A
Solubility in water: solids insoluble in water
Appearance and Odor: dark gray-black, synthetic odor
FIRE AND EXPLOSION HAZARDS DATA
Flash Point (Method Used): 52潞F (11潞C)
Extinguishing Media: dry chemical extinguisher
Special Fire Fighting Procedures:
Keep away from heat, sparks, and open flame.
HEALTH HAZARD INFORMATION
Routes of Entry: Inhalation: yes Skin: yes Ingestion: yes
Health Hazards: harmful or fatal if swallowed, consult medical attention.
Carcinogenicity: unknown
Eye: Irritation
SPECIAL PROTECTION INFORMATION
Respiratory Protection (Specify Type): NIOSH approved for fumes
Ventilation: An adequate ventilated spray booth is recommended
Local Exhaust: adequate ventilation required
Protective Gloves: suitable for solvents
Eye Protection: goggles or facemask
Other Protective Clothing or Equipment: apron
Work/Hygienic/Maintenance Practices: use practices common to good
manufacturing procedures
SPECIAL PRECAUTIONS
Keep away from heat, sparks, and open flame. Keep container closed when not in
use to avoid evaporation and contamination. Wash thoroughly after handling.
Rose Mill Co. 100 Brook Street West Hartford, CT 06110
860.232.9990ph 860.232.9995fx www.RoseMill.com info@RoseMill.com
#215Susp_MSDS Revised: 09/01/04 Supersedes: 12/10/03
|