Page 1 of 3
PHOSCAP
0-50-30 MKP PLUS SYSTEMIC IMPLANTS
MATERIAL SAFETY DATA SHEET
SECTION 1: CHEMICAL PRODUCT AND COMPANY INFORMATION
Chemical Family: Inorganic Salts
Formula: 0-50-30 MKP PLUS
NFPA Ratings: Health: 2, Fire: 0, Reactivity: 1.
Hazard Scale: 0 = minimal, 1 = slight, 2 = moderate, 3 = serious, 4 = severe
MANUFACTURER EMERGENCY TELEPHONE
Creative Sales, Inc. NUMBERS
P.O. Box 501
222 N. Park Avenue Product Information: (402) 727-4800
Fremont, NE 68025-0501 Medical Emergency: (800) 759-7739
U.S.A.
SECTION 2: HAZARDOUS INGREDIENTS
Does product contain hazardous ingredients: NO
Ingredients CAS#
Mono-potassium Potassium Phosphate Anhydrous 7778-77-0
Boron 12280-03-4
Sodium Molybdate 7631-95-0
Feric EDTA, Sodium Salts 15708-41-5
Copper EDTA, Sodium Salts 14025-15-1
Zinc EDTA, Sodium Salts 14025-21-9
Manganese EDTA, Sodium Salts 15375-84-5
Does product contain carcinogens? (NTP/IARC/ORC) NO
The ACGIH Threshold Limit Values for nuisance (inert) dusts containing < 1% crystalline
silica and no asbestos are: 10mg/m3 total, 5 mg/m3 respirable.
SECTION 3: HEALTH HAZARD INFORMATION
IMMEDIATE CONCERNS: MAY BE HARMFUL IF SWALLOWED OR INHALED.
MAY CAUSE SKIN AND EYE IRRITATION.
- Avoid contact with eyes, skin and clothing.
- Wash everything thoroughly after handling.
- Avoid breathing dust.
- Do not swallow.
Page 2 of 3
POTENTIAL HEALTH EFFECTS:
EYES: May cause eye irritation.
SKIN: May cause skin irritation.
INGESTION: Possible nausea, vomiting, diarrhea.
INHALATION: Prolonged or excessive inhalation may cause respiratory tract irritation.
MEDICAL CONDITION AGGRAVATED: Inhalation of dust may aggravate asthma.
SUMMARY OF RISKS: Prolonged or repeated contact with fertilizer may irritate eyes and
skin. Inhalation of dust may irritate nose, throat and lungs. Prolonged exposure may cause
weakness, depression, headache, mental impairment, anemia, methemoglobinemia and
kidney injury. Ingestion of product can cause severe gastrointestinal irritation, muscular
weakenss and blue-tinged skin (cyanosis). Infants and children are especially at risk for
cyanosis. Ingestion of large amounts may result in death.
SECTION 4: FIRST AID PROCEDURES
EYES: If in eyes, flush with water for 15 minutes holding eyelids open. Get medical
attention if irritation persists.
INGESTION: Never give anything by mouth to an unconscious or convulsing person. Have
conscious person drink 1 to 2 glasses of water, then induce repeated vomiting until vomit is
clear. Call a physician.
SKIN: Remove contaminated clothing. Flush affected area with plenty of water for 15
minutes. Wash with plenty of soap and water.
INHALATION: Remove person to fresh air. Treat symptomatically.
SECTION 5: FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA: Water fog or spray.
HAZARDOUS COMBUSTION PRODUCTS: Thermal decomposition may produce ammonia
as well as toxic oxides of carbon, nitrogen and other metal oxides.
EXPLOSION HAZARDS: Dusts at sufficient concentrations may form explosive mixtures
with air.
FIRE FIGHTING PROCEDURES: Evacuate area. Flood with water to cool containers.
Apply water from a safe distance to avoid splattering of molten material. Wear self-
contained breathing apparatus to fight fire.
FIRE FIGHTING EQUIPMENT: Wear self-contained breathing apparatus to fight large
fires.
FLASH POINT: Decomposes on heating.
COMMENTS: NFPA 430 Classification 鈥? 1 Oxidizer.
SECTION 6: ACCIDENTAL RELEASE MEASURES
GENERAL PROCEDURES: Avoid dusting or misting condition during cleanup. If
material is uncontaminated, collect and reuse as recommended for product. If
contaminated, put in appropriate container and dispose according to local, state or
Federal regulations. Keep spills away from drinking water supplies. After spill flush
area with water.
Page 3 of 3
SECTION 7: HANDLING AND STORAGE
HANDLING: See Label. Wash hands with soap and water after handling product. Avoid
container breakage. Avoid inhalation or contact with skin, eyes or clothing. Do not
contaminate water sources when disposing of equipment. Keep out of lakes, streams or
ponds.
STORAGE: KEEP OUT OF REACH OF CHILDREN. Avoid container breakage. Store in a
cool, dry area in closed container or package. Keep away from feed or foodstuffs.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
ENGINEERING CONTROLS: Use adequate ventilation to keep the airborne concentrations
of this material below the recommended exposure standard.
PERSONAL PROTECTIVE EQUIPMENT:
EYES AND FACE: Eye and face protection is not required for routine use. High airborne
dust levels or mist of product dissolved in liquid may be irritating 鈥? use chemical goggles.
SKIN: None required for normal use. If prolonged or repeated use irritates skin, use
neoprene or PVC gloves.
RESPIRATORY: If airborne dust levels are high or irritation occurs, use NIOSH/MSHA
approved respirator for dust, mist and fumes to reduce exposure to acceptable levels.
OTHER USE PRECAUTIONS: Running water or eye wash station should be available in
case material gets in eyes.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
CHEMICAL FORMULA: HK2PO4
PHYSICAL STATE: Solid
APPEARANCE: Crystals
COLOR: Medium-Blue
SOLUBILITY IN WATER: Typically 80-85% for water soluble fertilizers.
DENSITY: 60 鈥? 63 lbs/cubic foot
SECTION 10: STABILITY AND REACTIVITY
STABLE: Yes
HAZARDOUS POLYMERIZATION: No
CONDITIONS TO AVOID: Extreme heat. Contact with fuels and other organic or
combustible materials. Active metals such as aluminum and magnesium. Strong reducing
agents.
HAZARDOUS DECOMPOSITION PRODUCTS: In a fire, ammonia and toxic oxides on
nitrogen, carbon, potassium and sulfur may be generated.
INCOMPATABLE MATERIALS: Strong oxidizing (permanganate, dichromate, nitrate,
chlorine) and reducing agents, sodium nitrate and many chlorine compounds (including
household bleach and other cleaning products). Active metal, such as aluminum and
magnesium.
|