Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

N/A

File Name: marplex_com_au---Iupilon_S3500UR.asp
                                                                                        Marplex Australia Pty Ltd
ABN 78 004 691 614 ACN 004 691 614




IUPILON庐 S3500UR / S3501UR / S3503UR are the low/medium viscosity (very high melt flow) grades in the
Iupilon庐 range and are well suited to 鈥渄ifficult to fill鈥? moulding applications requiring UV stabilisation (UV), a mould
release agent (R), and a high notched impact resistance. Offering an excellent balance of transparency,
toughness, heat resistance, flame retardency and processability, typical applications include electrical switch
housings and junction box covers.
Note: [ Standard grade = S3500UR ] / [ FDA approved = S3501UR ] / [ Steam resistant = S3503UR ].

TYPICAL TESTING
VALUES
UNITS METHODS
CONDITIONS

1. Mechanical Properties
Notched Izod Impact Strength 12.7 x 3.2 mm J/m 550 ASTM D256
Falling Dart Impact 3.2 mm J 75 ASTM D3029
Tensile Strength 12.7 x 3.2 mm @ 20 mm/min MPa 62 ASTM D638
Elongation to Fail 12.7 x 3.2 mm @ 20 mm/min % 110 ASTM D638
Flexural Strength 12.7 x 6.4 mm @ 2.8 mm/min MPa 87 ASTM D790
Flexural Modulus 12.7 x 6.4 mm @ 2.8 mm/min MPa 2350 ASTM D790

2. Thermal Properties
Heat Deflection Temperature 12.7 x 6.4 mm @ 1.82 MPa 潞C 133 ASTM D648
12.7 x 6.4 mm @ 0.46 MPa 潞C 142 ASTM D648
Coefficient of Linear Thermal Expansion cm/cm/掳C (6-7) exp-5 ASTM D696

3. Electrical Properties
Volume Resistivity Ohm.cm 2.1 exp16 ASTM D149
Dielectric Constant MHz 2.85 ASTM D150

4. Physical Properties
Melt Flow Rate 300潞C, 1.20 kg g/10 min 23 ASTM D1238
Specific Gravity - 1.20 ASTM D792
Rockwell Hardness R 123 ASTM D785
UL Flammability 1.6 mm Rating V-2 UL 94
Water Absorption 24 hours % 0.24 ASTM D570
Total Light Transmittance 3.0 mm % 85 ASTM D1003
Reinforcement Level % - n/a
Mould Shrinkage 3.0 x 脴100 mm disc % 0.6卤0.2 ASTM D955

All test resuts were obtained using natural material. Issued: July 1998

Material Safety Data Sheet (MSDS): Code Iupilon




! " # $ # #! "
$ # #!
% ## %
!% # # % & #"
TYPICAL PROCESSING CONDITIONS


'( ) + ./ 0 34+/5- - 48 *)(8 47 - 04+28
*+*,- 12- 6(+.(7 ( ) (6 .-- *3(7 - 3*.6-- )
7./ 0*.7 *8 !
. 28 - 28
4303( *3(7 - 248 (0 7 9 41.((6 0 :( ;48(6 0 /- 3*9 9 (8 4+1433(20 ( 2(8*8 4.3( -
7./ 49 (8 * - * ;( 3- + 4:+ )9 .
3*.< - ,-' *209 59 2'1 - 28
5.30*. 0 - 734+ *2(8- = *87
0(7 2(3-- 0
)3 (3'.- 46;- *. 248 6(7/. *828
34+ 3( 0- *3(7 -
7./
3*.6--0*.7 3*.0 0
430 '( 48 (> (3'.-
2+ 34+ (8 3( (2489 (.0
;- 0 =



Temperature of pellet bed in dehumidifying drier 120 - 125 潞C

Minimum drying time at desired pellet bed temp 4 - 6 hours

Mould temperature 60 - 110 潞C

Nozzle temperature Do not exceed stock
temperature

Stock temperature 240 - 270 潞C

Cylinder temperatures Rear 230 - 245 潞C

Middle 240 - 255 潞C

Front 255 - 265 潞C

Fill speed Medium

Screw speed 40 - 60 rpm

Screw back pressure 0.1 - 0.5 MPa

Injection pressure 60 - 140 MPa

Clamp pressure 4 - 8 kN/cm虏


Comment(s):
1 Cleanliness of the dryer, machine hopper and machine screw/barrel/nozzle assembly are essential
for processing Iupilon庐 Polycarbonate and producing contamination free moulded components.
2 Iupilon庐 Polycarbonate is not compatible with other polymers.
3 It is suggested that the pre-drying, moulding die and material temperatures are manually confirmed
using a hand held temperature measuring device.

1 MPa = 145 psi
Conversions:
= 10.2 kg/cm虏
= 10 bar
潞C = 5(潞F-32)/9
1 kN/cm虏 = 0.65 ton/in虏

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
marplex_com_au---Iupilon_H2000R.asp N/A
marplex_com_au---Iupilon_H2000UR.asp N/A
marplex_com_au---Iupilon_H3000.asp N/A
marplex_com_au---Iupilon_H3000UR.asp N/A
marplex_com_au---Iupilon_H4000.asp N/A
marplex_com_au---Iupilon_MB2106.asp N/A
marplex_com_au---Iupilon_S1000.asp N/A
marplex_com_au---Iupilon_S1000R.asp N/A
marplex_com_au---Iupilon_S1000UR.asp N/A
marplex_com_au---Iupilon_S2000.asp N/A
marplex_com_au---Iupilon_S2000UR.asp N/A
marplex_com_au---Iupilon_S3000R.asp N/A
marplex_com_au---Iupilon_S3000UR.asp N/A
marplex_com_au---Iupilon_S3500UR.asp N/A
marplex_com_au---Iupilon_S3600R.asp N/A
marplex_com_au---Iupital.asp N/A
marplex_com_au---Iupital_F10.asp N/A
marplex_com_au---Iupital_F20-51.asp N/A
marplex_com_au---Iupital_F20-52.asp N/A
marplex_com_au---Iupital_F20-54.asp N/A
marplex_com_au---Iupital_F20.asp N/A
marplex_com_au---Iupital_F25.asp N/A
marplex_com_au---Iupital_F30.asp N/A
marplex_com_au---Iupital_F40.asp N/A
marplex_com_au---Iupital_FB2025.asp N/A
marplex_com_au---Iupital_FG2025.asp N/A
marplex_com_au---Iupital_LO21A.asp N/A
marplex_com_au---Luran_358N_MSDS.asp N/A
marplex_com_au---Luran_S_757G_MSDS.asp N/A
marplex_com_au---Luran_S_757R_MSDS.asp N/A
marplex_com_au---Luran_S_776SE_MSDS.asp N/A
marplex_com_au---Luran_S_776S_MSDS.asp N/A
marplex_com_au---Luran_S_777K_MSDS.asp N/A
marplex_com_au---Luran_S_778T_MSDS.asp N/A
marplex_com_au---Luran_S_796M_MSDS.asp N/A
marplex_com_au---Luran_S_797S_MSDS.asp N/A
marplex_com_au---Luran_S_KR2867CWU_MSDS.asp N/A
marplex_com_au---NG02_Natural.asp 621-60-4 621-60-6 621-60-9
marplex_com_au---NG04_Natural.asp 621-60-4 621-60-6 621-60-9
marplex_com_au---NG06_Black.asp N/A
marplex_com_au---NM11_Natural.asp 621-60-4 621-60-6 621-60-9
marplex_com_au---NM19_Natural.asp 621-60-4 621-60-8 621-60-9
marplex_com_au---Polystyrol_143E_MSDS.asp 621-60-4 621-60-8 0621-60-4 0621-60-9
marplex_com_au---Polystyrol_156F_MSDS.asp N/A
marplex_com_au---Polystyrol_158K_MSDS.asp N/A
marplex_com_au---Polystyrol_165H_MSDS.asp 621-60-4 621-60-8 0621-60-4 0621-60-9
marplex_com_au---Polystyrol_476L_MSDS.asp N/A
marplex_com_au---Polystyrol_495F_MSDS.asp N/A
marplex_com_au---Reny_1002F.asp N/A
marplex_com_au---Reny_1012F.asp N/A

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC