<,j'
~dJ
~
MATERIAL SAFETY DATA SHEET MSDS
NUMBER~
SECTION 1 -MANUFACTURER OR SUPPLIER DATA 101512
U S Chemica1
Corporation D. E. Kenas ~SGNATUAE t:. J(~
I MANUFACTURER"SNM'E&MAlUNGAODRESS PREPAREOBY
RBU
316 Hart Street
Watertown, Wisconsin 53094 USA
SECTION 2 -IDENTITY OF MATERIAL
SECTION 3 -PHYSICAL/CHEMICAL CHARACTERISTICS
SECTION 4 -HAZARDOUS INGREDIENTS/IDENTITY INFORMATION
RBU
SECTION 5 -SAFE USAGE DATA
EYES ---~Splash-proof
safety glasses, safety goggles, and an eye-wash station
PROTEcnVE -
~-
EQUIPMENT RESPIRATORY GlO\i拢S
TYPES
~one required with normal use. Rubber or Neoprene Long type if needed.
---
OTHER .--Wear
full-cover protective clothing to prevent repeated or prolonged contact
-
GEr'拢RAL MECHANK:AliSatisfactory.I
Maintain adequate ventilation Keep levels below recommended TLV
VENTILATION
I~
lOCAL~X~-
t ordinarily needed Avoid inhalation of mists containing this product
HANOLING&STORAGEFollow all label directions. Instruct personnel about proper use. hazards.precautions.
and first-aid measures. Avoid inhalation. ingestion and contact with skin and eyes
PRECAUTIONS -
Rotate stock regularly. Handle carefully to avoid damaging container. Keep container closed when~!n
use. Recommended storage temp below IOOoF. Do not freeze. Keep out of children's reach.
SECTION 6 -HEALTH HAZARD DATA
SECTION 7 -PHYSICAL HAZARD DATA
SECTION 8 -EMERGENCY RESPONSE DATA
FIRE
INGESTION: Do not induce vomiting- If patient is conscious and can swallow, administer milk or water.
SKIN: Remove contaminated clothes, flood with water for 15 minutes. EYES: Flood with lukewarm (not
FIRST AID hot) water poured from a large glass 2 or 3 inches from eyes. Remove contacts. Have patient blink as
MEASURES
much as possible while flooding the eyes. Continue for 15 minutes. INHALATION: Move victim to fresh
air. Give artificial respiration if patient is not breathing. ADMINISTER FIRST AID TREATMENT AS
STATED ABOVE, THEN CALL 1-800-851-7145 Ext 075 OR CONTACT PHYSICIAN FOR FURTHER MEDICAL INSTRUCTIONS.
STEPSTO BE TAKEN Wear proper protective equipment including rubber boots. Stop leak if you can
SPIUS~
do so without risk- Dike or dam large spills. Ventilate area if needed. Soak up with sand
RQ= or other non-combustible inert absorbent materials. Flush area with water and follow with
normal clean-up procedures. Keep combustibles away! Be careful as spills are s1ippery.
I N.A.
WASTE DISPOSAl METHOD Comply with all fede;;~l-:-~tate, and local ~egulations -Consult state and local
authorities for restrictions on disposal of chemical waste. If approved, may be diluted and drained
to a municipal sewer or waste treatment plant. Rinse empty container thoroughly with water before
discarding. Please recycle empty container whenever possible.
---~ --
THE DATA IN THIS MATERIAl SAFETY DATA SHEET RELATES ONlY TO THE SPECIFIC MATERIAL DESIGNATED AND OO::S NOT RELATE TO ITS USE IN COMBINATlON WITH ANY OTHER
MATERIAL OR PROCESS THE DATA aJNTAINED IS BELIEVED TO BE ACCURATE HOWEVER. SINCE USE aJNOITIONS VARY AND ARE DUTSICXO OUR aJNTROl. THE MANLIFACTURER
MAKES NO WARRANTES. EXPRESSED OR IMPLED. ANO ASSUMES NO LIABILITY FOR FAILURE TO FOLLOW PRODUCT USE DIRECTIONS AND SAFETY PRECAUTIONS-
I
|