MATERIAL SAFETY DATA SHEET
TASKI VISION MATTE Low Gloss Floor Finish
HMIS NFPA Personal protective equipment
Health 1 1
Fire Hazard 0 0
Reactivity 0 0
Version Number: 1 Preparation date: 2005-02-16
1. PRODUCT AND COMPANY IDENTIFICATION
Product name: TASKI VISION MATTE Low Gloss Floor Finish
MSDS #: F-00345001
Product code: 3045538, 3045546
Recommended use: Floor care.
Manufacturer, importer, supplier:
US Headquarters Canadian Headquarters
JohnsonDiversey, Inc. JohnsonDiversey - Canada, Inc.
8310 16th St. 2401 Bristol Circle
Sturtevant, Wisconsin 53177-0902 Oakville, Ontario L6H 6P1
Phone: 1-888-352-2249 Phone: 1-800-668-3131
MSDS Internet Address:
www.johnsondiversey.com
Emergency telephone number: 1-800-851-7145 (Prosar); 1-651-917-6133 (Int'l Prosar); 01-800-710-3400 (M茅xico)
2. HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
CAUTION. MAY BE MILDLY IRRITATING TO EYES. Mild skin irritation.
Principle routes of exposure: Eyes. Skin. Inhalation.
Skin contact: May be mildly irritating to skin.
Eye contact: May be mildly irritating to eyes.
Inhalation: None known.
Ingestion: None known.
3. COMPOSITION/INFORMATION ON INGREDIENTS
HAZARDOUS COMPONENTS
Ingredient CAS # Weight % LD50 Oral LD50 Dermal LC50 Inhalation
Diethylene glycol ethyl ether 111-90-0 1 - 5% 5.5 ml/kg (rat) 4.2 mL/kg (rabbit) 5.24 g/m3 (rat)
4. FIRST AID MEASURES
Eye contact: Flush immediately with plenty of water. Get medical attention if irritation occurs.
Skin contact: Flush immediately with plenty of water. Get medical attention if irritation occurs.
Inhalation: No specific first aid measures are required.
Ingestion: No specific first aid measures are required.
Aggravated Medical Conditions: Persons with pre-existing skin disorders may be more susceptable to irritating effects
5. FIRE-FIGHTING MEASURES
Suitable extinguishing media: Not applicable
Specific hazards: Not applicable
Unusual hazards: None known
Specific methods: No special methods required
Special protective equipment for firefighters: As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or
equivalent) and full protective gear
TASKI VISION MATTE Low Gloss Floor Finish 1 of 3
Extinguishing media which must not be used for safety reasons: No information available
6. ACCIDENTAL RELEASE MEASURES
Personal precautions: Use personal protective equipment
Environmental precautions No information available
and clean-up methods:
7. HANDLING AND STORAGE
Handling:
Avoid contact with skin and eyes. FOR COMMERCIAL AND INDUSTRIAL USE ONLY.
Storage:
Protect from freezing . Keep tightly closed in a dry, cool and well-ventilated place.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering measures to reduce exposure:
No special ventilation requirements . General room ventilation is adequate .
Personal Protective Equipment
Eye protection: No special requirements under normal use conditions
Hand protection: No special requirements under normal use conditions
Skin and body protection: No special requirements under normal use conditions
Respiratory protection: No special requirements under normal use conditions
Hygiene measures: Handle in accordance with good industrial hygiene and safety practice
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Appearance:
Liquid Emulsion
Color: Boiling point/range: Not determined
Opaque White
Odor: Melting point/range: Not determined
Ammoniacal
Specific gravity: pH:
1.014 No information available
Dilution pH: Density:
No information available 8.46
Bulk density: Decomposition temperature:
No information available Not determined
Vapor density: Autoignition temperature:
No information available No information available
Evaporation rate: Solubility:
No information available Dispersible
Solubility in other VOC:
No information available 0
solvents:
Viscosity: No information available Flash point: >200 (掳F) >93.3 (掳C)
Partition coefficient (n-octanol/water): No information available
10. STABILITY AND REACTIVITY
Stability: Stable.
Polymerization: Hazardous polymerisation does not occur.
Hazardous decomposition products: None reasonably foreseeable.
Materials to avoid: None known .
Conditions to avoid: None known.
11. TOXICOLOGICAL INFORMATION
Acute toxicity Oral, LD50 estimated to be greater than 5000 mg/kg, Dermal, LD50 estimated to be > 2000 mg/kg.
Component Information: See Section 3
Chronic toxicity: None known .
Specific effects
Carcinogenic effects: None known
Mutagenic effects: None known
Reproductive toxicity: None known
Target organ effects: None known
12. ECOLOGICAL INFORMATION
Environmental Information: no data available.
TASKI VISION MATTE Low Gloss Floor Finish 2 of 3
13. DISPOSAL CONSIDERATIONS
Waste from residues / unused products:
Dispose of according to all federal, state and local applicable regulations
14. TRANSPORT INFORMATION
DOT/TDG: Please refer to the Bill of Lading/receiving documents for up to date shipping information
15. REGULATORY INFORMATION
International Inventories
All components of this product are listed on the following inventories: U.S.A. (TSCA), Canada (DSL/NDSL).
U.S. Regulations
California Proposition 65: This product is not subject to the reporting requirements under California's Proposition 65
STATE RIGHT TO KNOW
Ingredient CAS # MARTK: NJRTK: PARTK: RIRTK: ILRTK: CTRTK:
Water 7732-18-5 - - - - - -
Diethylene glycol ethyl ether 111-90-0 - Listed Listed - - -
Tributoxyethyl phosphate 78-51-3 - Listed Listed - - -
Dipropylene glycol n-butyl ether 29911-28-2 - - - - - -
Styrene acrylic polymers TS* - - - - - -
Modified styrene acrylic polymers - - - - - -
CERCLA / SARA
Ingredient CAS # Weight % CERCLA/SARA RQ (lbs) Section 302 TPQ (lbs) Section 313
Diethylene glycol ethyl ether 111-90-0 1 - 5% Listed.
Tributoxyethyl phosphate 78-51-3 1 - 5% Listed.
Ingredient CAA HAP CAA ODS CWA Priority Pollutants
Diethylene glycol ethyl ether Listed.
Tributoxyethyl phosphate Listed.
Canada
WHMIS hazard class: Non-controlled.
16. OTHER INFORMATION
Reason for revision: Not applicable
Prepared by: NAPRAC
Additional advice: None
Notice to Reader: This document has been prepared using data from sources considered technically reliable. It does not constitute a warranty, express
or implied, as to the accuracy of the information contained within. Actual conditions of use and handling are beyond seller's control. User is responsible
to evaluate all available information when using product for any particular use and to comply with all Federal, State, Provincial and Local laws and
regulations.
TASKI VISION MATTE Low Gloss Floor Finish 3 of 3
|