Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

25852-47-5
112945-52-5
79-10-7
80-15-9
81-07-2
114-83-0

File Name: bmed_mcgill_ca---loctite_gasket_eliminatorr_515_flange_sealant.asp
                                                                                             Material Safety Data Sheet




Revision Date: 01/26/2006 Issue date: 02/02/2006

1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Product name: Gasket Eliminator(R) 515 Flange Sealant Item No. : 51531
Product type: Anaerobic Adhesive Region: United States
Company address: Contact Information:
Henkel Corporation Telephone: 860.571.5100
1001 Trout Brook Crossing Emergency telephone: 860.571.5100
Rocky Hill, Connecticut 06067 Internet: www.loctite.com


2. COMPOSITION/INFORMATION ON INGREDIENTS


Hazardous components % ACGIH TLV OSHA PEL OTHER
Polyurethane methacrylate resin 60-100 None None None
PROPRIETARY

Polyglycol dimethacrylate 10-30 None None None
25852-47-5

6 mg/m3 TWA 10 mg/m3 TWA 3 mg/m3 TWA respirable dust
Silica, amorphous, fumed, 5-10
crystalline-free
112945-52-5

Acrylic acid 1-5 2 ppm TWA 10 ppm TWA; 30 mg/m鲁 1 ppm TWA (skin); 3 ppm
79-10-7 (skin) STEL (skin)

1 ppm (6 mg/m3) Skin (WEEL)
Cumene hydroperoxide 1-5 None None
80-15-9

Saccharin 1-5 None None None
81-07-2

1-Acetyl-2-phenylhydrazine 0.1-1 None None None
114-83-0



3. HAZARDS IDENTIFICATION

EMERGENCY OVERVIEW
HMIS:
Physical state: Gel HEALTH: 2*
Color: Purple FLAMMABILITY: 1
Odor: Sharp PHYSICAL HAZARD: 1
Personal Protection: See Section 8

WARNING: CAUSES EYE, SKIN AND RESPIRATORY TRACT IRRITATION
MAY CAUSE ALLERGIC SKIN REACTION.
MAY BE HARMFUL IF SWALLOWED.

Relevant routes of exposure: Skin, Inhalation, Eyes

Potential Health Effects

Inhalation: May cause irritation to nose and throat.
Skin contact: Irritating to skin. May cause allergic skin reaction.
Eye contact: Vapors may irritate eyes. Contact with eyes will cause irritation.
Item No. : 51531 Product name: Gasket Eliminator(R) 515 Flange Sealant
1 of 5
Ingestion: May cause gastrointestinal tract irritation if swallowed.

Existing conditions aggravated by Acrylic acid: Respiratory disorders. Lung disease.
exposure:

See Section 11 for additional toxicological information.

4. FIRST AID MEASURES


Inhalation: Remove to fresh air. If symptoms develop and persist, get medical attention.

Skin contact: Wash with soap and water. Remove contaminated clothing and shoes. Wash clothing before reuse.
Get medical attention if symptoms occur.

Eye contact: Flush with copious amounts of water, preferably, lukewarm water for at least 15 minutes, holding
eyelids open all the time. Get medical attention.

Ingestion: Do not induce vomiting. Keep individual calm. Obtain medical attention.



5. FIRE-FIGHTING MEASURES

Flash point: Greater than 93潞C (200潞F) Tagliabue closed cup

Autoignition temperature: Not available

Flammable/Explosive limits-lower %: Not available

Flammable/Explosive limits-upper %: Not available

Extinguishing media: Foam, dry chemical or carbon dioxide.

Special fire fighting procedures: None

Unusual fire or explosion hazards: None

Hazardous combustion products: Oxides of carbon. Oxides of sulfur. Oxides of nitrogen. Irritating organic vapors.

6. ACCIDENTAL RELEASE MEASURES

Environmental precautions: Prevent product from entering drains or open waters.

Clean-up methods: Ensure adequate ventilation. Soak up with inert absorbent. Store in a partly filled, closed container until
disposal.

7. HANDLING AND STORAGE

Handling: Avoid contact with eyes, skin and clothing. Do not breathe mist or vapors.

Storage: For safe storage, store at or below 38掳C (100掳F).

Incompatible products: Refer to Section 10.

For information on product shelf life contact Henkel Customer Service at (800) 243-4874.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

Engineering controls: Use local exhaust ventilation to maintain airborne concentrations below established exposure limits.

Respiratory protection: Use NIOSH approved respirator if there is potential to exceed exposure limit(s).
Item No. : 51531 Product name: Gasket Eliminator(R) 515 Flange Sealant
2 of 5
Skin protection: Use impermeable gloves and protective clothing as necessary to prevent skin contact. Neoprene
gloves. Butyl rubber gloves. Natural rubber gloves.

Eye/face protection: Safety goggles or safety glasses with side shields.

See Section 2 for exposure limits.

9. PHYSICAL AND CHEMICAL PROPERTIES

Physical state: Gel
Color: Purple
Odor: Sharp
Vapor pressure: Less than 10 mm Hg at 27潞C (80潞F)
pH: Not applicable
Boiling point/range: Greater than 149潞C (300潞F)
Melting point/range: Not available
Specific gravity: 1.1
Vapor density: Not available
Evaporation rate: Not available
Solubility in water: Slight
Partition coefficient (n-octanol/water): Not available
VOC content: <4%

10. STABILITY AND REACTIVITY

Stability: Stable.

Hazardous polymerization: Will not occur.

Hazardous decomposition products: Oxides of carbon. Oxides of sulfur. Oxides of nitrogen. Irritating organic vapors.

Incompatability: Strong oxidizers.

Conditions to avoid: See "Handling and Storage" (Section 7) and "Incompatabilty" (Section 10).

11. TOXICOLOGICAL INFORMATION

Product toxicity data: Acute LD50 (oral) :Greater than 5000 (rat). (estimated). Acute dermal LD50 greater than 2000 mg/kg
(rabbit) (estimated).

Carcinogen Status

Hazardous components NTP Carcinogen IARC Carcinogen OSHA Carcinogen
Polyurethane methacrylate resin No No No
PROPRIETARY
Polyglycol dimethacrylate No No No
25852-47-5
Silica, amorphous, fumed, No No No
crystalline-free
112945-52-5
Acrylic acid No No No
79-10-7
Cumene hydroperoxide No No No
80-15-9
Saccharin No No No
81-07-2
1-Acetyl-2-phenylhydrazine No No No
114-83-0



Literature Referenced Target Organ & Other Health Effects




Item No. : 51531 Product name: Gasket Eliminator(R) 515 Flange Sealant
3 of 5
Hazardous components Health Effects/Target Organs
Polyurethane methacrylate resin Allergen, Irritant
PROPRIETARY
Polyglycol dimethacrylate Allergen, Irritant
25852-47-5
Silica, amorphous, fumed, Nuisance dust
crystalline-free
112945-52-5
Acrylic acid Allergen, Corrosive, Irritant, Kidney, Liver
79-10-7
Cumene hydroperoxide Allergen, Central nervous system, Corrosive, Irritant, Mutagen
80-15-9
Saccharin No Target Organs
81-07-2
1-Acetyl-2-phenylhydrazine Allergen, Blood, Kidney, Mutagen, Some evidence of carcinogenicity
114-83-0

12. ECOLOGICAL INFORMATION

Ecological information: Not available

13. DISPOSAL CONSIDERATIONS

Information provided is for unused product only.

Recommended method of disposal: Dispose of according to Federal, State and local governmental regulations.

EPA hazardous waste number: Not a RCRA hazardous waste.

14. TRANSPORT INFORMATION

U.S. Department of Transportation Ground (49 CFR):
Proper shipping name: Unrestricted
Hazard class or division: None
Identification number: None
Packing group: None

International Air Transportation (ICAO/IATA):
Proper shipping name: Unrestricted
Hazard class or division: None
Identification number: None
Packing group: None

WaterTransportation (IMO/IMDG):
Proper shipping name: Unrestricted
Hazard class or division: None
Identification number: None
Packing group: None
Marine pollutant: None




Item No. : 51531 Product name: Gasket Eliminator(R) 515 Flange Sealant
4 of 5
15. REGULATORY INFORMATION

United States Regulatory Information

TSCA 8 (b) Inventory Status: All components are listed or are exempt from listing on the Toxic Substances Control Act Inventory.
TSCA 12 (b) Export Notification: 4-Methoxyphenol (150-76-5).

CERCLA/SARA Section 302 EHS: None above reporting de minimus.
CERCLA/SARA Section 311/312: Immediate Health Hazard, Delayed Health Hazard
CERCLA/SARA 313: This product contains the following toxic chemicals subject to the reporting requirements of section 313
of the Emergency Planning and Community Right-To-Know Act of 1986 (40 CFR 372). Cumene
hydroperoxide (CAS# 80-15-9) . Acrylic acid (CAS# 79-10-7).

California Proposition 65: This product contains a chemical known to the State of California to cause cancer and birth defects or
other reproductive harm.



Canada Regulatory Information


CEPA DSL/NDSL Status: All components are listed on or are exempt from listing on the Domestic Substances List.
WHMIS hazard class: D.2.A, D.2.B

16. OTHER INFORMATION

This material safety data sheet contains changes from the previous version in sections: 9

Prepared by: Kyra Kozak Woods, Product Safety and Regulatory Affairs Specialist

DISCLAIMER: The data contained herein are furnished for information only and are believed to be reliable. However, Henkel Corporation
does not assume responsibility for any results obtained by persons over whose methods Henkel Corporation has no control. It is the
user's responsibility to determine the suitability of Henkel's products or any production methods mentioned herein for a particular
purpose, and to adopt such precautions as may be advisable for the protection of property and persons against any hazards that may be
involved in the handling and use of any of Henkel Corporation's products. In light of the foregoing, Henkel Corporation specifically
disclaims all warranties, express or implied, including warranties of merchantability and fitness for a particular purpose, arising from sale
or use of Henkel Corporation's products. Henkel Corporation further disclaims any liability for consequential or incidental damages of
any kind, including lost profits.




Item No. : 51531 Product name: Gasket Eliminator(R) 515 Flange Sealant
5 of 5

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
bmed_mcgill_ca---3inoneoil.asp 64742-52-5
bmed_mcgill_ca---3m_scotch-weld_epoxy_potting_compound-adhesive_270_black.asp N/A
bmed_mcgill_ca---3m_super_77_classic_spray_adhesive.asp 110-82-7 107-83-5 115-10-6 75-28-5 74-98-6 96-14-0 75-83-2 79-29-8 110-54-3
bmed_mcgill_ca---4229-liquid.asp 64742-89-8 110-54-3 1330-20-7 67-64-1 100-41-4 112945-52-5 1333-86-4
bmed_mcgill_ca---a9_alum_cutting_fluid.asp 64742-58-1
bmed_mcgill_ca---air-lube-10wnr.asp N/A
bmed_mcgill_ca---alloy_sn-pb_solders-alloys.asp 2005-06-1 7440-31-5 7439-92-1
bmed_mcgill_ca---alvania_grease_rl_2.asp N/A
bmed_mcgill_ca---astro_cut_series_2001_b.asp 64742-52-5 15-20-1
bmed_mcgill_ca---barbasolaloeshavingcream.asp N/A
bmed_mcgill_ca---bernz-o-matic_propane.asp 74-98-6
bmed_mcgill_ca---castrol_stick_wax.asp 8002-74-2 64742-60-5
bmed_mcgill_ca---chemtronics_freez-it.asp 811-97-2
bmed_mcgill_ca---circuitworks_conductive_epoxy_part_a.asp 7440-22-4 025068-38-6 68475-94-5
bmed_mcgill_ca---circuitworks_heat_sink_grease.asp 63148-62-9 1314-13-2 112945-52-5
bmed_mcgill_ca---cool_tool_ii.asp 13-61-4
bmed_mcgill_ca---dow_corning_high_vacuum_grease.asp N/A
bmed_mcgill_ca---epoxy-steel-syringe.asp 140-31-8 112-24-3 90-72-2 1333-86-4
bmed_mcgill_ca---ep_hydraulic_oil_68.asp 64742-54-7 68649-42-3 104-76-7
bmed_mcgill_ca---ethanolmsds.asp N/A
bmed_mcgill_ca---granite_plate_cleaner_2216a51.asp N/A
bmed_mcgill_ca---invoice_flammables_cabinet.asp N/A
bmed_mcgill_ca---ips_weld_on_3.asp 75-09-2 1119-40-0 80-62-6
bmed_mcgill_ca---jbweld_hardener.asp 1317-65-3 7727-43-7 14807-96-6 13463-67-7 1314-98-3 98-00-0 68410-23-1
bmed_mcgill_ca---jbweld_resin.asp 1317-65-3 65997-19-5 25068-38-6 64742-94-5
bmed_mcgill_ca---lepage_contact_cement_cleaner.asp 64742-95-6 9016-45-9
bmed_mcgill_ca---lepage_epoxy_putty.asp 25068-38-6 28064-14-4 32610-77-8 90-72-2
bmed_mcgill_ca---lepage_expoxy_steel.asp 140-31-8 112-24-3 90-72-2 1333-86-4
bmed_mcgill_ca---lepage_polyfilla-cellulose_filler.asp N/A
bmed_mcgill_ca---lepage_poly_instafil.asp N/A
bmed_mcgill_ca---lepage_suregrip_carpenters_glue.asp N/A
bmed_mcgill_ca---loctiter_222ms_threadlocker_low_strength.asp 25852-47-5 9004-96-0 81-07-2 112945-52-5 80-15-9 57-55-6
bmed_mcgill_ca---loctiter_290_threadlocker_wicking_grade.asp 25852-47-5 80-15-9 81-07-2
bmed_mcgill_ca---loctite271.asp 25852-47-5 39382-25-7 81-07-2 80-15-9
bmed_mcgill_ca---loctite609.asp 25852-47-5 868-77-9 68132-02-5 9003-42-3 80-15-9 81-07-2
bmed_mcgill_ca---loctite680.asp 24448-20-2 27813-02-1 39382-25-7 80-15-9 25852-47-5 114-83-0
bmed_mcgill_ca---loctite7471.asp 67-64-1 75-28-5 67-63-0 149-30-4
bmed_mcgill_ca---loctitedegreaser.asp 64742-47-8 5989-27-5
bmed_mcgill_ca---loctite_242_medium_strength_threadlocker_blue_automotive_grade.asp 9004-96-0 81-07-2 112945-52-5 57-55-6 25852-47-5 80-15-9
bmed_mcgill_ca---loctite_401_prism_surface_insensitive_instant_adhesive.asp 7085-85-0
bmed_mcgill_ca---loctite_565_thread_sealant_pst_pipe_sealant_with_ptfe.asp 25852-47-5 68186-73-2 9004-36-8 9002-84-0 13463-67-7 67762-90-7 81-07-2 80-15-9
bmed_mcgill_ca---loctite_620_retaining_compound_slip_fit.asp 24448-20-2 3006-93-7 27813-02-1 80-15-9 112945-52-5 114-83-0
bmed_mcgill_ca---loctite_770_primer_prism.asp 142-82-5
bmed_mcgill_ca---loctite_gasket_eliminatorr_515_flange_sealant.asp 25852-47-5 112945-52-5 79-10-7 80-15-9 81-07-2 114-83-0
bmed_mcgill_ca---loctite_threadlocker_262.asp 25852-47-5 39382-25-7 81-07-2 80-15-9
bmed_mcgill_ca---lubri-delta_acetone.asp 67-64-1
bmed_mcgill_ca---lubriplate.asp 64742-52-5 4485-12-5 68991-19-5 1314-13-2
bmed_mcgill_ca---lucas_oil_red_n_tacky_2.asp N/A
bmed_mcgill_ca---lucas_oil_x-tra_heavy_duty_grease.asp N/A
bmed_mcgill_ca---mastercraft_578016.asp N/A

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC