EMS CATALOG NO: 20600
EMS PRODUCT: Ruthenium Red
DATE: 09/22/99
PAGE NUMBER: One of 3
MATERIAL SAFETY DATA SHEET
The information contained herein is based on data considered
accurate. However, no warranty is expressed or implied
regarding the accuracy of these data or the results to be
obtained from the use thereof.
Electron Microscopy Sciences assumes no responsibility for
personal injury or property damage to vendees, users or
third parties caused by the material. Such vendees or users
assume all risks associated with the use of the material.
ELECTRON MICROSCOPY SCIENCES
321 MORRIS ROAD
P.O. BOX 251
FORT WASHINGTON, PA 19034 24 HOUR EMERGENCY PHONE NUMBER
(215) 646-1566 CHEMTREC: (800) 424-9300
_________________________________________________________________
FOR PRODUCT AND SALES INFORMATION
_________________________________________________________________
CONTACT ELECTRON MICROSCOPY SCIENCES OFFICE ABOVE.
_________________________________________________________________
PRODUCT IDENTIFICATION
_________________________________________________________________
PRODUCT NAME: Ruthenium Red
CAS NUMBER: 11103-72-3
MOLECULAR FORMULA: H42CL6N14O2RU3
________________________________________________________________
HAZARDS IDENTIFICATION
________________________________________________________________
LABEL PRECAUTIONARY STATEMENTS:
Caution - Avoid contact and inhalation.
1
________________________________________________________________
FIRST AID MEASURES
________________________________________________________________
If swallowed, wash out mouth with water provided person is conscious.
Call a physician.
In case of skin contact, flush with copious amounts of water for
at least 15 minutes. Remove contaminated clothing and shoes. Call
a physician.
If inhaled, remove to fresh air. If breathing becomes difficult, call
a physician.
In case of contact with eyes, flush with copious amounts of water
for at least 15 minutes. Assure adequate flushing by separating
the eyelids with fingers. Call a physician.
________________________________________________________________
FIRE FIGHTING MEASURES
________________________________________________________________
EXTINGUISHING MEDIA: Water spray, carbon dioxide, dry chemical
powder, or appropriate foam.
SPECIAL FIREFIGHTING
PROCEDURES: Wear self-contained breathing apparatus and
protective clothing to prevent contact with
skin and eyes.
UNUSUAL FIRE AND
EXPLOSIONS HAZARDS: Emits toxic fumes under fire conditions.
________________________________________________________________
ACCIDENTAL RELEASE
________________________________________________________________
Wear protective equipment. Sweep up, place in a bag and hold for
waste disposal. Avoid raising dust. Ventilate area and wash
spill site after material pickup is complete.
________________________________________________________________
EXPOSURE CONTROLS/PERSONAL PROTECTION
________________________________________________________________
Wear appropriate NIOSH/MSHA-approved respirator, chemical-
resistant gloves, safety goggles, other protective clothing.
Mechanical exhaust required.
2
________________________________________________________________
PHYSICAL AND CHEMICAL PROPERTIES
________________________________________________________________
APPEARANCE AND ODOR: Red-brown powder
________________________________________________________________
STABILITY/REACTIVITY DATA
________________________________________________________________
STABILITY: Stable
HAZARDOUS COMBUSTION OR DECOMPOSITION PRODUCTS:
TOXIC FUMES OF: Ammonia, Hydrogen Chloride Gas.
HAZARDOUS POLYMERIZATION: Will not occur.
________________________________________________________________
TOXICOLOGICAL INFORMATION
________________________________________________________________
ACUTE EFFECTS: May be harmful by inhalation, ingestion, or skin
absorption. May cause irritation.
The toxicological properties have not been thoroughly
investigated.
_________________________________________________________________
DISPOSAL CONSIDERATIONS
_________________________________________________________________
Dissolve or mid the material with a combustible solvent and burn
in a chemical incinerator equipped with an afterburner and
scrubber.
Observe all Federal, State and local environmental regulations.
_________________________________________________________________
REGULATORY INFORMATION
_________________________________________________________________
EUROPEAN INFORMATION
CAUTION: Substance not yet fully tested.
3
|