Page 1 of 3
MATERIAL SAFETY DATA SHEET
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
SUPPLIER: METPREP LTD.
CURRIERS CLOSE
CHARTER AVENUE
COVENTRY CV4 8AW
TELEPHONE: PRODUCT INFORMATION: 024 7642 1222
FAX: 024 7642 1192
CHEMICAL NAME:
PRODUCT: ABRASIVE BELTS
PRODUCT NUMBERS: Various
IMPORTANT NOTICE Coated abrasives are inert products which do not create any risk when handled or stored.
When used on grinding machines they require specific measures to protect operators. During grinding operations 90% or more
of the particulate of dust come from the material being ground and, for wet grinding, from aerosols generated by the grinding
fluid. Specific attention must therefore be given to the nature of the part and of the fluid and the appropriate protection devices
must be installed.
2. COMPOSITION / INFORMATION ON INGREDIENTS
CHEMICAL NATURE: Aluminium Oxide and/or Silicon Carbide and Zirconia bonded to cloth backing using cured
urea/melamine resin containing Kaolin and Sterate fillers
INGREDIENT (S): CAS NUMBER: %: HAZARD SYMBOL: R PHRASES:
3. HAZARDS IDENTIFICATION
Coated abrasives are not hazardous products.
4. FIRST AID MEASURES
GENERAL INFORMATION: NA.
INHALATION: Remove to fresh air. In case of irritation to respiratory system, seek medical attention.
SKIN: NA.
EYE: Irrigate with eyewash solution or clear water, holding the eyelids apart, for at least 5 minutes. Obtain
immediate medical attention.
INGESTION: NA.
5. FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA: Dry Sand, foam, dry powder or CO2.
UNSUITABLE EXTINGUISHING MEDIA:
FIRE FIGHTING PROTECTIVE EQUIPMENT: A self-contained breathing apparatus and suitable protective clothing
should be worn in fire conditions.
FURTHER INFORMATION: NA.
6. ACCIDENTAL RELEASE MEASURES
PERSONAL PECAUTIONS: NA
ENVIRONMENTAL PRECAUTIONS: NA
METHODS OF CLEANING UP: NA
Ref. C:\MSDS\BELTS.DOC Prepared January 2005
Page 2 of 3
MATERIAL SAFETY DATA SHEET
7. HANDLING AND STORAGE
HANDLING: Follow recommendations for machines and national regulations.
STORAGE: Keep only in original container. Store in cool, dry place away from heat, sparks, flame and direct
sunlight.
Keep away from sources of ignition 鈥? No Smoking.
INDUSTRIAL HYGIENE PRACTICES: Wash face and hands thoroughly with the soap and water after use and before
eating, drinking, smoking or applying cosmetics.
8. EXPOSURE CONTROL / PERSONAL PROTECTION
NOT APPLICABLE WHEN COATED ABRASIVES ARE HANDLED OR STORED:
During the grinding operation with coated abrasives particles of dust come from the material being ground. The general
value for dust is max 6 mg /m 3
9. PHYSICAL AND CHEMICAL PROPERTIES
FORM: Solid
COLOUR: Various
ODOUR: NA
NA at 20 O C
PH
NA O C
BOILING POINT:
NA O C
MELTING POINT:
NA O C
THERMAL DECOMPOSITION:
NA O C
IGNITION TEMPERATURE:
NA at 20 O C
VAPOUR PRESSURE:
NA g/cm 3
DENSITY:
NA kg/m 3
BULK DENSITY:
WATER SOLUBILITY: Insoluble
MISCIBILITY WITH WATER: NA
NA at 25 O C
VISCOSITY:
10. STABILITY AND REACTIVITY
CONDITIONS TO AVOID: No hazardous reactions known. Avoid heat, flames, sparks and other sources of ignition.
INCOMPATIBILITY (MATERIALS TO AVOID): Strong acids, strong bases & oxidising agents may modify the mechanical
characteristics of the products and create safety hazards when used on machines.
HAZARDOUS DECOMPOSITION PRODUCTS: If coated abrasives are used in accordance with instructions no
hazardous decomposition products are created.
11. TOXICOLOGICAL INFORMATION
NOT APPLICABLE WHEN HAMDLED OR STORED
According to the experience gathered for many years, coated abrasives, when properly used have no adverse effect on
health, refer to the preliminary not about dust and aerosols of grinding fluid.
12. ECOLOGICAL INFORMATION
Based upon current information, there are no special regulations on degradability testing to be observed.
Ref. C:\MSDS\BELTS.DOC Prepared January 2005
Page 3 of 3
MATERIAL SAFETY DATA SHEET
13. DISPOSAL CONSIDERATIONS
PRODUCT: After use, coated abrasives may be contaminated with hazardous materials (particles or cooling agents) and
should be dispos ed of in accordance with national regulations.
14. TRANSPORTATION
LAND TRANSPORT:
ADR
REGULATION: Not dangerous goods 鈥? full transport
RID:
REGULATION: Not dangerous goods 鈥? full transport
AIR TRANSPORT 鈥?
IATA CLASS:
REGULATION Not dangerous goods 鈥? full transport
OCEAN TRANSPORT 鈥?
IMDG CLASS:
REGULATION Not dangerous goods 鈥? full transport
15. REGULATORY INFORMATION
EC REGULATIONS 鈥?
EINECS: all chemical listed
EEC Classification:
Risk Phrases:
Safety Phrases:
HAZARDOUS COMPONENTS WHICH MUST BE LISTED ON THE LABEL:
NATIONAL LEGISLATION:
NOTIFICATION STATUS: EINECS Not Required
TSCA
16. ADDITIONAL INFORMATION
This data sheet was prepared in accordance with Directive 91/155/EEC.
The above information has been gathered from reliable sources and is believed to be correct. However, the information is
provided without any warranty, either expressed or implied. MetPrep Ltd shall not be held liable for any damage resulting
from the handling of or contact with the above product.
Ref. C:\MSDS\BELTS.DOC Prepared January 2005
|