Page 1 of 4
MATERIAL SAFETY DATA SHEET
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
SUPPLIER: METPREP LTD.
CURRIERS CLOSE
CHARTER AVENUE
COVENTRY CV4 8AW
TELEPHONE: PRODUCT INFORMATION: 024 7642 1222
FAX: 024 7642 1192
CHEMICAL NAME:
PRODUCT: DAP MOUNT
PRODUCT NUMBERS: 11 20 105, 11 20 106
2. COMPOSITION / INFORMATION ON INGREDIENTS
CHEMICAL NATURE:
INGREDIENT (S): CAS NUMBER: %: HAZARD SYMBOL: R PHRASES:
3. HAZARDS IDENTIFICATION
No specific hazards known
4. FIRST AID MEASURES
GENERAL INFORMATION: Remove contaminated or saturated clothing immediately.
INHALATION: Remove to fresh air. In case of irritation to respiratory system, seek medical attention.
SKIN: When contact with skin, rinse immediately with soap and water.
EYE: Irrigate with eyewash solution or clear water, holding the eyelids apart, for at least 5 minutes. Obtain
immediate medical attention.
INGESTION: Do not induce vomiting. Wash out mouth with water and give 200-300 ml (half a pint) of water to drink.
Obtain medical attention. Never give anything by mouth to an unconscious person. Call a physician.
5. FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA: Dry Sand, foam, dry powder or CO2. Keep fire exposed containers cool by spraying with water.
UNSUITABLE EXTINGUISHING MEDIA:
FIRE FIGHTING PROTECTIVE EQUIPMENT: A self-contained breathing apparatus and suitable protective clothing
should be worn in fire conditions.
FURTHER INFORMATION: Burning produces Carbon Oxides, Nitrogen Oxides, and under certain conditions of
combustion, traces of other toxic substances cannot be excluded.
6. ACCIDENTAL RELEASE MEASURES
PERSONAL PRECAUTIONS: Ensure adequate ventilation. Do not breathe vapour. Avoid ignition sources. Avoid contact
with skin, eyes and clothing.
ENVIRONMENTAL PRECAUTIONS: Prevent entry into drains. Do not contaminate surface water. Avoid subsoil
penetration. METHODS OF CLEANING UP: Pick - up mechanically. Dispose of absorbed material in accordance with
regulations.
7. HANDLING AND STORAGE
HANDLING: Provide exhaust ventilation if dust is formed. Suitable industrial vacuum cleaners or central exhaust
ventilation equipment must be used for taking up dust
Ref. C:\MSDS\DAPMOUNT.DOC Prepared May 2005
Page 2 of 4
MATERIAL SAFETY DATA SHEET
STORAGE: Keep only in original container. Store in cool, dry place away from heat, sparks, flame and direct
sunlight.
Keep container closed to prevent water absorption and contamination. Keep away from sources of
ignition 鈥? No Smoking.
IMPORTANT:
STORAGE TEMPERATURE: Preferably not exceeding 35 潞C.
INDUSTRIAL HYGIENE PRACTICES: Wash face and hands thoroughly with the soap and water after use and before
eating, drinking, smoking or applying cosmetics.
8. EXPOSURE CONTROL / PERSONAL PROTECTION
COMPONENTS WITH WORKPLACE CONTROL PARAMETERS:
CAS No: Material Type Value Unit
ENGINEERING MEASURES: No special precautions required.
PERSONAL PROTECTIVE EQUIPMENT:
RESPIRATORS: Wear suitable respiratory protective equipment if exposure to levels above the occupational exposure
limit is likely. A suitable mask with filter type A may be appropriate. In the event of formation of
particularly high levels of dust a self-contained breathing apparatus may be appropriate.
EYE PROTECTION: Safety glasses or chemical splash goggles.
GLOVES: Wear suitable gloves. PVA/Polyethylene laminate and supported PVA gloves offer the best protection.
Gloves should be changed regularly and if excessive exposure has occurred.
OTHER: Wear suitable protective clothing.
PROTECTIVE MEASURES: Do not breathe vapours/dust. Keep away from sources of ignition 鈥? No smoking.
Avoid contact with skin, eye & clothing.
9. PHYSICAL AND CHEMICAL PROPERTIES
FORM: Granules
COLOUR: Blue
ODOUR: Almost odourless
NA at 20 O C
PH
NA O C
BOILING POINT:
60 - 100 O C
MELTING POINT:
NA O C
THERMAL DECOMPOSITION:
>200 O C
IGNITION TEMPERATURE:
<0.01 Pa at 20 O C
VAPOUR PRESSURE:
1.8 鈥? 2.0 g/cm 3
DENSITY:
WATER SOLUBILITY: Insoluble
MISCIBILITY WITH WATER: NA
NA at 25 O C
VISCOSITY:
10. STABILITY AND REACTIVITY
CONDITIONS TO AVOID: Avoid static discharges.
INCOMPATIBILITY (MATERIALS TO AVOID): Strong acids, strong bases and strong oxidising agents.
HAZARDOUS DECOMPOSITION PRODUCTS: Thermal decomposition or burning may release Carbon Oxides and/or
other toxic gases or vapours.
11. TOXICOLOGICAL INFORMATION
ACUTE ORAL TOXICITY: NA
ACUTE DERMAL TOXICITY:
Ref. C:\MSDS\DAPMOUNT.DOC Prepared May 2005
Page 3 of 4
MATERIAL SAFETY DATA SHEET
EYE IRRITATION: Slight
SKIN IRRITATION: Slight
SENSITISATION:
12. ECOLOGICAL INFORMATION
EXOTOXICITY EFFECTS: The product has not been tested. Because of the product鈥檚 consistency and low solubility in
water bioavailability is not likely
FURTHER INFORMATION ON ECOLOGY: Do not allow product to reach drainage. May be separated out mechanically
at purification plants.
13. DISPOSAL CONSIDERATIONS
PRODUCT:For recycling, consult manufacturer. In accordance with regulations for special waste, must be taken to an
authorized special waste disposal or incineration plant
PACKAGING: Uncontaminated packaging may be taken for recycling.
14. TRANSPORTATION
LAND TRANSPORT:
ADR
REGULATION: Not dangerous goods 鈥? full transport
RID:
REGULATION: Not dangerous goods 鈥? full transport
AIR TRANSPORT 鈥?
IATA CLASS:
REGULATION Not dangerous goods 鈥? full transport
OCEAN TRANSPORT 鈥?
IMDG CLASS:
REGULATION Not dangerous goods 鈥? full transport
15. REGULATORY INFORMATION
EC REGULATIONS 鈥?
EINECS: all chemical listed
EEC Classification:
Risk Phrases:
Safety Phrases:
HAZARDOUS COMPONENTS WHICH MUST BE LISTED ON THE LABEL:
NATIONAL LEGISLATION:
NOTIFICATION STATUS: EINECS Not Required
TSCA
16. ADDITIONAL INFORMATION
This data sheet was prepared in accordance with Directive 91/155/EEC.
Ref. C:\MSDS\DAPMOUNT.DOC Prepared May 2005
Page 4 of 4
MATERIAL SAFETY DATA SHEET
The above information has been gathered from reliable sources and is believed to be correct. However, the information is
provided without any warranty, either expressed or implied. MetPrep Ltd shall not be held liable for any damage resulting
from the handling of or contact with the above product.
Ref. C:\MSDS\DAPMOUNT.DOC Prepared May 2005
|