Page 1 of 3
MATERIAL SAFETY DATA SHEET
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
SUPPLIER: METPREP LTD.
CURRIERS CLOSE
CHARTER AVENUE
COVENTRY CV4 8AW
TELEPHONE: PRODUCT INFORMATION: 024 7642 1222
FAX: 024 7642 1192
CHEMICAL NAME:
PRODUCT: EDGE MOUNT
PRODUCT NUMBERS: 11 99 04, 11 99 05
2. COMPOSITION / INFORMATION ON INGREDIENTS
CHEMICAL NATURE: Phenolic (two step phenolformaldehyde resin) moulding compound with mineral & organic filler
INGREDIENT (S): CAS NUMBER: %: HAZARD SYMBOL: R PHRASES:
3. HAZARDS IDENTIFICATION
If handled and used for moulding purposes , the substance presents no critical hazards to man.
4. FIRST AID MEASURES
GENERAL INFORMATION: Remove contaminated or saturated clothing immediately.
INHALATION: Remove to fresh air. In case of irritation to respiratory system, seek medical attention.
SKIN: When contact with skin, rinse immediately with soap and water.
EYE: Irrigate with eyewash solution or clear water, holding the eyelids apart, for at least 5 minutes. Obtain
immediate medical attention.
INGESTION: Do not induce vomiting. Wash out mouth with water and give 200-300 ml (half a pint) of water to drink.
Obtain medical attention. Never give anything by mouth to an unconscious person. Call a physician.
5. FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA: Dry Sand, foam, dry powder or CO2. Keep fire exposed containers cool by spraying with water.
UNSUITABLE EXTINGUISHING MEDIA:
FIRE FIGHTING PROTECTIVE EQUIPMENT: A self-contained breathing apparatus and suitable protective clothing
should be worn in fire conditions.
FURTHER INFORMATION: Burning produces Carbon Oxides, Nitrogen Oxides, and under certain conditions of
combustion, traces of other toxic substances cannot be excluded.
6. ACCIDENTAL RELEASE MEASURES
PERSONAL PECAUTIONS: Ensure adequate ventilation. Do not breathe vapour. Avoid ignition sources. Avoid contact
with skin, eyes and clothing.
ENVIRONMENTAL PRECAUTIONS: Prevent entry into drains. Do not contaminate surface water. Avoid subsoil
penetration. METHODS OF CLEANING UP: Pick - up mechanically. Dispose o f absorbed material in accordance with
regulations.
7. HANDLING AND STORAGE
HANDLING: Provide exhaust ventilation if dust is formed. Suitable industrial vacuum cleaners or central exhaust
ventilation equipment must be used for taking up dust
Ref. C:\MSDS\EDGEMOUNT.DOC Prepared May 2005
Page 2 of 3
MATERIAL SAFETY DATA SHEET
STORAGE: Keep only in original container. Store in cool, dry place away from heat, sparks, flame and direct
sunlight.
Keep container closed to prevent water absorption and contamination. Keep away from sources of
ignition 鈥? No Smoking.
IMPORTANT:
STORAGE TEMPERATURE: Preferably not exceeding 15 潞 C - 23 潞 C.
INDUSTRIAL HYGIENE PRACTICES: Wash face and hands thoroughly with the soap and water after use and before
eating, drinking, smoking or applying cosmetics.
8. EXPOSURE CONTROL / PERSONAL PROTECTION
During the moulding process certain volatiles may be given off; these are phenol, ammonia and fo rmaldehyde. Inhalation
of these vapours can cause irritation of the respiratory system, therefore adequate ventilation should be provided so
that the concentration of these vapours in the working atmosphere does not exceed the occupational exposure limits.
9. PHYSICAL AND CHEMICAL PROPERTIES
FORM: Granules
COLOUR: Black
ODOUR: Almost odourless
6 - 8 at 20 O C
pH
NA O C
BOILING POINT:
ca 110 O C
MELTING POINT:
NA O C
THERMAL DECOMPOSITION:
>550 O C
IGNITION TEMPERATURE:
NA at 20 O C
VAPOUR PRESSURE:
1.75 鈥? 1.85 g/cm 3
DENSITY:
650 - 850 kg/m 3
BULK DENSITY:
WATER SOLUBILITY: Insoluble
MISCIBILITY WITH WATER: NA
NA at 25 O C
VISCOSITY:
10. STABILITY AND REACTIVITY
Stable if handled and used as recommended in our catalogue (see also point 7).
11. TOXICOLOGICAL INFORMATION
This material contains less than 1 % free phenol. With glass fibre filled materials, irritation of the skin may occur by direct
contact; the incidence depends mostly on the susceptibility of the individual. In order to reduce the possibility of skin
irritation, direct contact should be avoided as much as possible by hygienic working conditions and the use of barrier
creams production of this material, neither cadmium nor cadmium compounds, nor CFCs, halogens, ODCs (Ozone
depleting chemicals) or PCBs are used or set free during processing,
12. ECOLOGICAL INFORMATION
Based upon current information, there are no special regulations on degradability testing to be observed.
13. DISPOSAL CONSIDERATIONS
PRODUCT: Dispose in accordance with local, state and federal regulations for solid wastes..
14. TRANSPORTATION
LAND TRANSPORT:
ADR
REGULATION: Not dangerous goods 鈥? full transport
Ref. C:\MSDS\EDGEMOUNT.DOC Prepared May 2005
Page 3 of 3
MATERIAL SAFETY DATA SHEET
RID:
REGULATION: Not dangerous goods 鈥? full transport
AIR TRANSPORT 鈥?
IATA CLASS:
REGULATION Not dangerous goods 鈥? full transport
OCEAN TRANSPORT 鈥?
IMDG CLASS:
REGULATION Not dangerous goods 鈥? full transport
15. REGULATORY INFORMATION
EC REGULATIONS 鈥?
EINECS: all chemical listed
EEC Classification:
Risk Phrases:
Safety Phrases:
HAZARDOUS COMPONENTS WHICH MUST BE LISTED ON THE LABEL:
NATIONAL LEGISLATION:
NOTIFICATION STATUS: EINECS Not Required
TSCA
16. ADDITIONAL INFORMATION
This data sheet was prepared in accordance with Directive 91/155/EEC.
The above information has been gathered from reliable sources and is believed to be correct. However, the information is
provided without any warranty, either expressed or implied. MetPrep Ltd shall not be held liable for any damage resulting
from the handling of or contact with the above product.
Ref. C:\MSDS\EDGEMOUNT.DOC Prepared May 2005
|