Page 1 of 5
MATERIAL SAFETY DATA SHEET
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
SUPPLIER: METPREP LTD.
CURRIERS CLOSE
CHARTER AVENUE
COVENTRY CV4 8AW
TELEPHONE: PRODUCT INFORMATION: 024 7642 1222
FAX: 024 7642 1192
CHEMICAL NAME:
PRODUCT: SPRAYMOUNT
PRODUCT NUMBERS: 13 90 05
2. COMPOSITION / INFORMATION ON INGREDIENTS
CHEMICAL NATURE:
INGREDIENT (S): CAS NUMBER: %: SYMBOL R PHRASES
Butane: 106-97-8: 30.0 鈥? 35.0 F+; R:12
Naphtha 92045-53-9 10.0 鈥? 20.0 T, R45,65
Pentane 109-66-0: 10.0 鈥? 15.0 F; Xn,N R:12,51/53,65,66,67
Propane 74-98-6 7.0 鈥? 13.0 F+; R:12
Hydrotreated Light Naphtha 64742-49-0 10.0 鈥? 20.0 T, R45,65
Acetone: 67-64-1 3.0 鈥? 7.0 F; Xi R11,36,66,67
Acrylate Polymer 3.0 鈥? 7.0
Alpha-Pinene-Beta-Pinene Polymer31393-98-3: 1.0 鈥? 5.0
3. HAZARDS IDENTIFICATION
Extremely flammable. Irritant. Irritating to skin. Vapours may cause drowsiness and dizziness. Harmful to aquatic
organisms. May cause long term adverse effects in the aquatic environment.
4. FIRST AID MEASURES
Eye Contact:
Immediately flush eyes with large amounts of water. Get immediate medical attention.
Skin Contact:
Flush skin with large amounts of water. If irritation persists, get medical attention.
Inhalation:
Remove person to fresh air. If not breathing, give artificial respiration. If breathing is difficult, get immediate medical attention.
Ingestion:
Do not induce vomiting. Drink two glasses of water. Call a medical doctor.
5. FIRE FIGHTING MEASURES
Flammable. Vapors or gases may travel considerable distance to ignition source and flash back.
FIRE & EXPLOSION HAZARDS: Fine mists or sprays may be flammable at temperatures below the flash point.
May polymerize on heating. Sealed containers may rupture explosively if hot.
Ref. C:\MSDS\SPRAYMOUNT.DOC Prepared May 2005
Page 2 of 5
MATERIAL SAFETY DATA SHEET
EXTINGUISHING MEDIA: Water spray, foam, dry powder or CO2. Keep fire exposed containers cool by spraying with
water.
FIRE FIGHTING PROTECTIVE EQUIPMENT: A self-contained breathing apparatus and suitable protective clothing
should be worn in fire conditions.
6. ACCIDENTAL RELEASE MEASURES
Eliminate sources of ignition. Ensure suitable personal protection (including respiratory protection) during removal of
spillages. Prevent entry into drains. Adsorb spillages onto sand, earth or any suitable adsorbent material. Do not
adsorb onto sawdust or other combustible materials. Transfer to a container for disposal or recovery.
Spillages or uncontrolled discharges into watercourses must be alerted to the appropriate regulatory body.
7. HANDLING AND STORAGE
PRECAUTIONS FOR HANDLING: Observe precautions found on the label. Close container after each use. Ground all
metal containers w hen transferring. Use explosion-proof equipment.
HANDLING: Avoid contact with skin and eyes.
Avoid inhalation of high concentration of vapors. Use only in well ventilated areas.
Take precautionary measures against static discharges.
STORAGE: Keep only in original container. Store in cool, dry place away from heat, sparks, flame and direct
sunlight.
Keep container closed to prevent water absorption and contamination. Keep away from sources of
ignition 鈥? No Smoking.
IMPORTANT: Aerosol container contains flammable gas under pressure. Extremely flammable gas and liquid.
STORAGE TEMPERATURE: Preferably not exceeding 49 潞C.
INDUSTRIAL HYGIENE PRACTICES: Wash face and hands thoroughly with the soap and water after use and before
eating, drinking, smoking or applying cosmetics.
8. EXPOSURE CONTROL / PERSONAL PROTECTION
Provide adequate ventilation, including appropriate local extraction, to ensure that the defined occupational exposure
limit is not exceeded.
Considerations should be given to the work procedures involved and the potential extent of exposure as they may
determine whether a higher level of protection is required.
The following information is given as general guidance.
RESPIRATORS: Wear suitable respiratory protective equipment if exposure to levels above the occupational exposure
limit is likely. A suitable mask with filter type A may be appropriate. In the event of formation of
particularly high levels of vapor a self-contained breathing apparatus may be appropriate.
EYE PROTECTION: Safety glasses or chemical splash goggles.
GLOVES: Wear suitable gloves. PVA/Polyethylene laminate and supported PVA gloves offer the best protection. Gloves
should be changed regularly and if excessive exposure has occurred.
OTHER: Wear suitable protective clothing.
OCCUPATIONAL EXPOSURE LIMITS:
Ref. C:\MSDS\SPRAYMOUNT.DOC Prepared May 2005
Page 3 of 5
MATERIAL SAFETY DATA SHEET
HAZARDOUS INGREDIENT (S): PEL (OSHA) : TLV (ACGIH) : COMPANY
RECOMMENDATION:
Butane (F+; R:12) (106-97-8) UK HSE TWA: 600 ppm; 1430 mg/m3 OES
UK HSE STEL: 750 ppm; 1780 mg/m3 OES
Pentane (F; R:11) (109-66-0)
UK HSE TWA: 600 ppm; 1800 mg/m3 OES
UK HSE STEL: 750 ppm; 2250 mg/m3 OES
Propane (F+; R:12) (74-98-6)
UK HSE TWA: Asphyxiant OES
Acetone (F; R:11) (67-64-1)
UK HSE TWA: 750 ppm; 1780 mg/m3 OES
UK HSE STEL: 1500 ppm; 35560 mg/m3 OES
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance and Odour Clear liquid in aerosol container
pH: Not applicable
Boiling Point: Not determined
Melting point: Not determined
Flash Point: -46.00掳C
Auto-flammability: Not determined
Vapour pressure: Not determined
Water Solubility: Nil
Specific gravity: 0.65 water
Vapour density: Not determined
Volatile organic compounds: Not determined
Evaporation rate: Not determined
Viscosity: Not determined
Percentage volatile: 85 鈥? 90%
10. STABILITY AND REACTIVITY
STABILITY: Stable
CONDITIONS TO AVOID: Heat and ignition sources; contamination.
INCOMPATIBILITY (MATERIALS TO AVOID):
HAZARDOUS DECOMPOSITION PRODUCTS: CO, CO2, smoke
HAZARDOUS POLYMERIZATION: Can not occur.
CONDITIONS TO AVOID FOR HAZARDOUS POLYMERIZATION: Not applicable
11. TOXICOLOGICAL INFORMATION
Effects from Eye Contact:
Moderate eye irritation: signs/symptoms can include redness. Swelling, pain, tearing and hazy vision.
Effects from skin contact:
Mild skin irritation (after prolonged or repeated contact): signs/symptoms can include redness, swelling, and itching.
Effects from inhalation:
Intentional concentration and inhalation may be harmful or fatal.
Central nervous system depression: signs/symptoms can include headache, dizziness, drowsiness, inco-ordination,
slowed reaction time, slurred speech, giddiness and unconsciousness.
Irritation (upper respiratory): signs/symptoms can include soreness of the nos e and throat, coughing and sneezing.
Effects from ingestion:
Ingestion is not a likely route of exposure to this product.
Ref. C:\MSDS\SPRAYMOUNT.DOC Prepared May 2005
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Irritation of gastrointestinal tissues: signs/symptoms can include pain, vomiting, abdominal tenderness, nausea, blood
in vomit, and blood in faeces.
12. ECOLOGICAL INFORMATION
ENVIRONMENTAL FATE AND DISTRIBUTION: Not determined
PERSISTENCE AND DEGRADATION: Not determined.
TOXICITY: Not determined
EFFECTS ON EFFLUENT TREATMENT: Not determined.
13. DISPOSAL CONSIDERATIONS
Special instructions:
Incinerate in a facility licensed to handle hazardous waste and in the presence of a combustible material. Facility must
be capable of handling aerosol cans. Dispose of empty cans in a landfill/waste disposal site. Dispos e of completely
absorbed waste product in a facility permitted to accept chemical wastes.
14. TRANSPORTATION
UN Number UN1950
UK ROAD/SEA FREIGHT (IMO) CLASSIFICATION
Substance Identification Number: UN1950
Class: 2.0
Packing Group: Not applicable
Proper Shipping Name: Aerosols
CDG-ROAD (if applicable) Not applicable
ADR/RID CLASSIFICATION
Class: 2.0
Item Number: 5f
ICAD/IATA CLASSIFICATION
Class: 2.1
Sub-Risk: Not applicable
Packing Group: Not applicable
Proper Shipping Name: Aerosols Flammable N.O.S
15. REGULATORY INFORMATION
EC REGULATIONS 鈥?
EINECS: all chemical listed
EEC Classification: FLAMMABLE AND IRRITANT
Symbol: Indication of Danger
F Highly Flammable
Xi Irritant
Ris k Phrase: Extremely flammable. May be harmful if inhaled. Vapours may ignite
Explosively.
Safety Phrases: Keep away from heat. Keep away from sources of ignition including
Pilot lights and sparks. No smoking. Do not spray directly into eyes.
Avoid prolonged or repeated contact with the skin. In case of contact
With eyes, rinse immediately with plenty of water and seek medical
Advice after contact with skin, wash with soap and water.
WARNING! Pressurised container. Protect from sunlight and do not
Ref. C:\MSDS\SPRAYMOUNT.DOC Prepared May 2005
Page 5 of 5
MATERIAL SAFETY DATA SHEET
Expose to temperatures exceeding 50 degrees C. Do not pierce or burn
even after use. Do not spray on naked flame or incandescent material.
Keep out of reach of children.
16. ADDITIONAL INFORMATION
This data sheet was prepared in accordance with Directive 91/155/EEC.
The above information has been gathered from reliable sources and is believed to be correct. However, the information is
provided without any warranty, either expressed or implied. MetPrep Ltd shall not be held liable for any damage resulting
from the handling of or contact with the above product.
Ref. C:\MSDS\SPRAYMOUNT.DOC Prepared May 2005
|