Page 1 of 3
MATERIAL SAFETY DATA SHEET
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
SUPPLIER: METPREP LTD.
CURRIERS CLOSE
CHARTER AVENUE
COVENTRY CV4 8AW
TELEPHONE: PRODUCT INFORMATION: 024 7642 1222
FAX: 024 7642 1192
CHEMICAL NAME:
PRODUCT: DIAMOND WAFERING BLADE
PRODUCT NUMBERS: Various
IMPORTANT NOTICE Diamond abrasives are inert products, which do not create any risk when handled or stored.
When used on cutting machines they require specific measures to protect operators. During cutting operations 95% or more of
the particulate of dust come from the material being cut and, for wet cutting, from aerosols generated by the cutting fluid. Specific
attention must therefore be given to the nature of the part and of the fluid and the appropriate protection devices must be
installed.
2. COMPOSITION / INFORMATION ON INGREDIENTS
CHEMICAL NATURE: Natural or synthetic diamond with resin, metal or vitified bonds
INGREDIENT (S): CAS NUMBER: % OSHA LIMIT ACGIH TLV CARCINOGEN
3. HAZARDS IDENTIFICATION
If handled and used for abrasive cutting purposes as indicated, the substance presents no critical hazards to man.
EC Directive No 88/379.
4. FIRST AID MEASURES
GENERAL INFORMATION: In all cases of doubt, or when symptoms persist, seek medical attention.
INHALATION: In dry applications, abrasive products may generate nuisance dust. There may therefore be a
requirement for local exhaust ventilation and/or respiratory protection. Exposure to this dust should be
adequately controlled and personal exposure kept below 10 mg m-3 8 hour TWA total inhalable dust,
or 5 mg m -3 8-hour TWA respirable dust. In addition, the airborne concentration of the material should
be considered.
SKIN: Should irritation occur, seek medical attention.
EYE: Dust may cause irritation. Abrasive grit in the eyes may cause damage and eye protection is required.
In case of grit in the eyes, seek medical/ophthalmic advice.
INGESTION: NA.
5. FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA: Use any standard extinguishing media.
UNSUITABLE EXTINGUISHING MEDIA:
FIRE FIGHTING PROTECTIVE EQUIPMENT: A self-contained breathing apparatus and suitable protective clothing
should be worn in fire conditions.
FURTHER INFORMATION:
6. ACCIDENTAL RELEASE MEASURES
PERSONAL PECAUTIONS: NA
ENVIRONMENTAL PRECAUTIONS: NA
Ref. C:\MSDS\WAFER.DOC Prepared May 2005
Page 2 of 3
MATERIAL SAFETY DATA SHEET
METHODS OF CLEANING UP: NA
7. HANDLING AND STORAGE
HANDLING: Take measures to ensure against mechanical damage. Avoid impacts.
Store in a dry area 10 -30 o C and less than 65% relative humidity. Avoid extremes of temperature &
STORAGE:
humidity.
INDUSTRIAL HYGIENE PRACTICES: Wash face and hands thoroughly with the soap and water after use and before
eating, drinking, smoking or applying cosmetics.
8. EXPOSURE CONTROL / PERSONAL PROTECTION
Respiratory protection: Approved dust respirators may be required depending on airborne dust concentration.
Hand protection: No specific protection required under normal conditions
Eye protection: Wear suitable goggles
Skin protection: No specific protection required under normal conditions
Hearing Protection: Should be used at all times.
Hazardous substances with occupational exposure limits:
Long term exposure limit mg m -3
CAS-No Material Content (% weight)
9. PHYSICAL AND CHEMICAL PROPERTIES
FORM: Solid
COLOUR:
ODOUR: None as supplied.
NA at 20 O C
PH
NA O C
BOILING POINT:
NA O C
MELTING POINT:
NA O C
THERMAL DECOMPOSITION:
NA O C
IGNITION TEMPERATURE:
NA at 20 O C
VAPOUR PRESSURE:
2 - 4 g/cm 3
SPECIFIC GRAVITY:
NA kg/m 3
BULK DENSITY:
WATER SOLUBILITY: Slight
MISCIBILITY WITH WATER: NA
NA at 25 O C
VISCOSITY:
10. STABILITY AND REACTIVITY
CONDITIONS TO AVOID: No hazardous reactions known. Excessive heat and humidity.
INCOMPATIBILITY (MATERIALS TO AVOID): Strong acids, strong bases & strong oxidising agents may modify the
mechanical characteristics of the product and create safety hazards when used on machines.
HAZARDOUS DECOMPOSITION PRODUCTS: If wheels are used in accordance with instructions no hazardous
decomposition products are created.
Ref. C:\MSDS\WAFER.DOC Prepared May 2005
Page 3 of 3
MATERIAL SAFETY DATA SHEET
11. TOXICOLOGICAL INFORMATION
NOT APPLICABLE WHEN HAMDLED OR STORED
According to the experience gathered for many years, diamond abrasives, when properly used have no adverse effect
on health, refer to the preliminary not about dust and aerosols of cutting fluid.
12. ECOLOGICAL INFORMATION
Based upon current information, there are no special regulations on degradability testing to b e observed.
13. DISPOSAL CONSIDERATIONS
PRODUCT: Dispose of in a secured, sanitary landfill and in accordance with local regulations. In the U.K., this abrasive
product is not considered as notifiable waste.
14. TRANSPORTATION
LAND TRANSPORT:
ADR
REGULATION: Not dangerous goods 鈥? full transport
RID:
REGULATION: Not dangerous goods 鈥? full transport
AIR TRANSPORT 鈥?
IATA CLASS:
REGULATION Not dangerous goods 鈥? full transport
OCEAN TRANSPORT 鈥?
IMDG CLASS:
REGULATION Not dangerous goods 鈥? full transport
15. REGULATORY INFORMATION
EC REGULATIONS 鈥?
EINECS: all chemical listed
EEC Classification:
Risk Phrases:
Safety Phrases:
HAZARDOUS COMPONENTS WHICH MUST BE LISTED ON THE LABEL:
NATIONAL LEGISLATION:
NOTIFICATION STATUS: EINECS Not Required
TSCA
16. ADDITIONAL INFORMATION
This data sheet was prepared in accordance with Directive 91/155/EEC.
The above information has been gathered from reliable sources and is believed to be correct. However, the information is
provided without any warranty, either expressed or implied. MetPrep Ltd shall not be held liable for any damage resulting
from the handling of or contact with the above product.
Ref. C:\MSDS\WAFER.DOC Prepared May 2005
|