1 CHEMICAL PRODUCT & COMPANY IDENTIFICATION
Trade Name POLYMER CLICHE MATERIAL
292
MSDS Number
- -0
CAS Number
TRANS TECH AMERICA, INC.
Supplier
475 N. GARY AVENUE
CAROL STREAM, IL 60188 USA
Telephone Numbers - 24 Hour Emergency Assistance
Emergency (352)323-3500
Telephone Numbers - General Assistance
Information (630)752-4000
2 COMPOSITION / INFORMATION ON INGREDIENTS
Concentration
Ingredient Name CAS Number Exposure Limits / Health Hazards
DERIVATIVES OF ACYRLAMIDE 40 %
ACRYLAMIDE 79-06-1 <1% OSHA TWA: 0.3 mg/m3 (skin)
ACGIH TWA: 0.03 mg/m3, A2 (skin)
A2- Suspect Human Carcinogen
METHACRYLATES
3 HAZARDS IDENTIFICATION
Emergency Overview
Carcinogenicity: Yes - acrylamide component only. NTP: Yes - Group 2 (may be reasonably anticipated to be carcinogenic).
IARC: Yes - Group 2A (sufficient evidence for carcinogenicity in experimental animals, vol.39, sup. 7) OSHA: No
4 FIRST AID MEASURES
Medical Conditions Aggravated by Exposure
ND
5 FIRE FIGHTING MEASURES
Extinguishing Media
Foam,, co2, dry chemical, water.
Basic Fire Fighting Procedures
Wear MSHA/NIOSH approved self-contained breathing apparatus and full-cover impervious clothing.
Unusual Fire & Explosion Hazards
Ni
NI
Flash Point
6 ACCIDENTAL RELEASE MEASURES
Printed On 31-Mar-03
ND = No Data NA = Not Applicable NI = Not Indicated
292 POLYMER CLICHE MATERIAL
Material Id Trade Name 1/ 3
Spill or Leak Procedure
Material is solid; cannot be spilled. In case of transport damage to packaging, material or container, material to be salvaged
must not have been exposed to ultraviolet light.
7 HANDLING & STORAGE
Handling
Material is intended to be used for the production of relieve-type printing plates only. Steel plate backing may have sharp
edges. Use caution in handling.
Storage
Store below 100f in a dry area. Do not store near heat sources. Material is light-sensitive. Do not open packages until ready
to use. Handle in uv protected light.
Ventilation
Only at the point of use.
8 EXPOSURE CONTROLS / PERSONAL PROTECTION
9 PHYSICAL & CHEMICAL PROPERTIES
Odor and Appearance
Dark gray to light yellowish color; unspecific odor.
NI
Boiling Point
1
Specific Gravity
NI
Melting Point
NI
Vapor Pressure
NI
Evaporation Rate
NI
Vapor Density
Uncured coating 100% molecularly dispersible in water alcohol mix.
Solubility In Water
10 STABILITY & REACTIVITY
Stability/Incompatibility
Stable No known incompatible material.
Hazardous Reactions/Decomposition Products
Small quantities of organic vapors will off-gas when material is heated above 200f.
Hazardous Polymerization
Material polymerizes when subjected to heat above 150c. Unusable for intended function if heated above
11 TOXICOLOGICAL INFORMATION
Routes of Exposure
Dermal, if misused.
12 ECOLOGICAL INFORMATION
13 DISPOSAL CONSIDERATIONS
Waste Disposal
Processed plates may be treated as scrap. Follow local regulations.
Printed On 31-Mar-03
ND = No Data NA = Not Applicable NI = Not Indicated
292 POLYMER CLICHE MATERIAL
Material Id Trade Name 2/ 3
14 TRANSPORT INFORMATION
15 REGULATORY INFORMATION
NFPA Ratings
Health Flammability Reactivity Special Hazards
HMIS Ratings
Health 2 Flammability 1 Reactivity 0 Personal Prot. Equip. B
16 OTHER INFORMATION
2/4/1998 Replaces Sheet Dated
Completed On
TRANS TECH AMERICA, INC.
Completed By
Printed On 31-Mar-03
ND = No Data NA = Not Applicable NI = Not Indicated
292 POLYMER CLICHE MATERIAL
Material Id Trade Name 3/ 3
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP