Mist-Trol 100
庐
DEPOSITION-COVERAGE AID AND DRIFT RETARDANT
ACTIVE INGREDIENTS: DIRECTIONS FOR USE
Polyvinyl Polymer (polyacrylamide)..................................... 1% Select correct dosage from chart below.
Constituents ineffective as a spray adjuvant ....................... 99%
鈥? Fill mix tank with water, and pesticide. Begin to agitate.
TOTAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100% 庐
鈥? Add Mist-Trol 100.
All ingredients are exempt from tolerance requirements under
鈥? If additional surfactant or other spray adjuvants are used,
40 CFR 180.
庐
they may be added after Mist-Trol 100.
SPECIMEN 鈥? Continue to agitate mix tank for at least 2 minutes
KEEP OUT OF REACH OF CHILDREN
before spraying.
CAUTION
鈥? Follow all cleanup precautions on label of pesticide used
Stop -before using this product obtain all related information and
LABEL
Follow governmental procedures for disposal of pesticide
read directions for use, conditions of sale, limitations, liabilities
spray solution.
and practical treatments.
USE PRECAUTIONS - The degree of drift hazard varies with the
type of pesticide, application conditions, and vegetation near the DOSAGE CHART
sprayed area. Consult your local agricultural advisor. Remember, Application/ Nozzle Orientation Quantity of Mist-Trol 100,
pesticide drift is no accident. Common sense and sound applica- Spray Pressure per 100 gls mixture
tion technology must be followed when spraying pesticides. MIST- Air, below 45 psi Straight back 2-4 quarts
45掳 angled back 3-5 quarts
TROL 100 will retard, but not totally eliminate drift. May cause irri-
Ground, below 30 psi Flat fan, flood 1-3 quarts
tation to skin and eyes.
Off-Center 2-3 quarts
Ground, 30-35 psi Flat fan, flood 2-3 quarts
Off-Center 3-4 quarts
FIRST AID Spray Guns 3-5 quarts
Ground, 50-150 psi Spray Guns 3-10 quarts
Call a poison control center or doctor immediately
for treatment advice. After use, flush and rinse spray system. Follow clean-up instructions on the pesticide label.
If Swallowed: Have person sip a glass of water if able to swallow.
Do not induce vomiting unless told to do so by a poison control
center or doctor. Do not give anything by mouth to an unconscious WARRANTY
person.
Townsend warrants that this product, when used as directed,
If on Skin or Clothing: Take off contaminated clothing. Rinse skin is reasonably fit for use as designated on this label.
immediately with plenty of water for 15-20 minutes.
Townsend makes no warranty of fitness or merchantability.
If Inhaled: Move person to fresh air. If person is not breathing, call Townsend's maximum liability for breach of this warranty
911 or an ambulance, then give artificial respiration, preferably shall not exceed the purchase price of this product. In no
mouth to mouth if possible. event shall Townsend be liable for indirect or consequential
If in Eyes: Hold eye open and rinse slowly and gently with water damages. This warranty shall not be changed by oral or
for 15-20 minutes. Remove contact lenses if present, after the first written agreement unless signed by a duly authorized
5 minutes, then continue rinsing eye. Have the product container officer of Townsend.
with you when calling a poison control center or doctor, or going
for treatment.
*Mist-Trol is a registered trademark of Townsend.
GENERAL INFORMATION
庐
Mist-Trol 100 is an effective, easy-to-use adjuvant for
deposition improvement and drift retardation in spraying
庐
operations. Mist-Trol 100 is compatible with most water
Manufactured For:
soluble, wettable powder and dry flowable pesticides when
TOWNSEND CHEMICAL DIVISION
applied by aerial application or standard ground equipment.
SELMA, INDIANA 47383
Page 1 of 3
MIST-TROL 100
Date of Revision: 02-11-05
Supersedes: 07-07-00
Date of Issue: 04-96
TOWNSEND CHEMICAL DIVISION
IN CASE OF EMERGENCY CALL
INFOTRAC: 1-800-535-5053
MATERIAL SAFETY DATA
1. PRODUCT IDENTIFICATION
MIST-TROL铮? 100
TRADEMARK:
SYNONYMS: Polyvinyl Polymer
CHEMICAL FAMILY: Anionic Polyacrylamide Solution
2. HAZARDOUS INGREDIENTS
OSHA REGULATED
COMPONENT CAS. NO. % TWA/CEILING REFERENCE
No Permissible Exposure Limits (TLV) have been established by ACGIH or OSHA.
3. EFFECTS OF OVEREXPOSURE:
Primary active component of this product has an acute oral (rat) LD50 and an acute dermal (rabbit) LD50
of greater than 2.5 g/kg and greater than 10 g/kg, respectively. This product produced no eye irritation
and no dermal irritation during primary irritation tests in rabbits.
4. EMERGENCY FIRST AID
Call a poison control center or doctor immediately for treatment advice.
IF SWALLOWED: Have person sip a glass of water if able to swallow. Do not induce vomiting unless
told to do so by a poison control center or doctor. Do not give anything by mouth
to an unconscious person.
IF ON SKIN OR
CLOTHING: Take off contaminated clothing. Rinse skin immediately with plenty of water for
15-20 minutes.
IF INHALED: Move person to fresh air. If person is not breathing, call 911 or an ambulance,
then give artificial respiration, preferably mouth to mouth if possible.
IF IN EYES: Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact
lenses if present, after the first 5 minutes, then continue rinsing eye. Have the product
container with you when calling a poison control center or doctor, or going for treatment.
5. REACTIVITY DATA
STABILITY: Stable.
CONDITIONS TO AVOID: None known.
POLYMERIZATION: Will Not Occur.
CONDITIONS TO AVOID: None known.
INCOMPATIBLE MATERIALS: Strong oxidizing agents.
HAZARDOUS
DECOMPOSITION PRODUCTS: Thermal decomposition or combustion may produce carbon monoxide,
carbon dioxide and/or oxides of N.
Page 2 of 3
MIST-TROL 100
Date of Revision: 02-11-05
Supersedes: 07-07-00
Date of Issue: 04-96
6. PHYSICAL PROPERTIES
APPEARANCE: Clear to slightly hazy, viscous Liquid
ODOR: Mild Odor
SPECIFIC GRAVITY: 1.00 (+/-.05)
pH: 6.0-8.0
SOLUBILITY IN WATER: Dispersible
7. NFPA HAZARD RATING (National Fire Protection Association)
FIRE: 1 HEALTH: 0 REACTIVITY: 0 SPECIAL: -
FIRE: Materials that must be preheated before ignition can occur.
HEALTH: Materials which on exposure under fire conditions would offer no hazard
beyond that of ordinary combustible material. No hazard beyond that of
ordinary combustible material.
REACTIVITY: Materials which in themselves are normally stable, even under fire
exposure conditions, and which are not reactive with water.
8. FIRE AND EXPLOSION HAZARD INFORMATION
FLASHPOINT: >200掳F
FLAMMABLE LIMITS (%by vol.): Not Applicable.
AUTOIGNITION TEMP: Not Available.
DECOMPOSITION TEMP: Not Available.
FIRE FIGHTING: Use water, carbon dioxide or dry chemical to extinguish fires.
Wear self-contained, positive pressure breathing apparatus.
9. SPECIAL PRECAUTIONS
HANDLING AND STORAGE: Protect from freezing. Store at temperatures between 45掳F and 90掳F.
Keep in original container tightly closed. Do not reuse empty container.
Disposal must be made in accordance with applicable governmental
regulations. To avoid product degradation and equipment corrosion, do
not use iron, copper or aluminum containers or equipment.
10. SPECIAL PROTECTION INFORMATION
Engineering controls are not usually necessary, if good hygiene practices are strictly followed. Before eating,
drinking or smoking, wash face and hands thoroughly with soap and water. Wear impervious gloves to prevent
skin contact. For operations where eye or face contact can occur, wear chemical splash proof goggles.
11. SPILL OR LEAK PROCEDURES
WARNING IMPORTANT! SPILLS OF THIS PRODUCT ARE VERY SLIPPERY. Scoop up spills and place in a
waste disposal container. Flush the area thoroughly with water and scrub to remove residue. If slipperiness
remains, apply more dry-sweeping compound. Do not flush large quantities of the material to sewer.
Page 3 of 3
MIST-TROL 100
Date of Revision: 02-11-05
Supersedes: 07-07-00
Date of Issue: 04-96
12. REGULATORY INFORMATION
COMPOUNDS WHICH REQUIRE REPORTING UNDER SARA TITLE III
Sara Regulated Compounds Section CAS NO. Percent
None Known
The recommendation for safe handling and protection procedures are believed to be generally suitable for the standard uses of this
compound. However, each user should identify his intended uses of this material and determine whether they are appropriate. All data
included in this document is released as typical values and should not be utilized to determine the suitability of this material for a
particular use or purpose. No warranty, either expressed or implied, is hereby made, nor do we give permission, inducement, or
recommendations to practice any patented invention without a license. All data is offered for consideration, investigation and verification
purposes only.
TOWNSEND CHEMICAL DIVISION
SELMA, INDIANA 47383
|