Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

88-69-7

File Name: 00044601.asp
                                 MATERIAL SAFETY DATA SHEET




1. CHEMICAL PRODUCT & COMPANY IDENTIFICATION
HAZARD RATINGS HMIS 庐 NFPA
Manufacturer/Supplier SI Group
3* 2
Health
P.O. Box 1046
2 2
Schenectady, NY 12301 United States Flammability
0 0
Reactivity
Telephone Numbers - 24 Hour Emergency Assistance
C
PPE
1-(800)-424-9300
In USA -- CHEMTREC
NFPA Special Hazards
(703)-527-3887]
International [Call Collect]

Telephone Numbers - General Assistance
General 518-887-2400
ORTHO-ISO-PROPYLPHENOL
Trade Name

153
NAERG #

B3, E, D2B
WHMIS Classifications
88-69-7
CAS Number

ORTHO-ISOPROPYLPHENOL
Chemical Name / Class
Chemical intermediate
Product Use
The material, or components, is either on the TSCA inventory list or is exempt from the requirement to be listed.
TSCA Status
on DSL
CEPA/DSL Status
This information is not considered to represent confidential business information to SII / SCL
Trade Secret

2-(1-Methylethyl) phenol
Synonym(s):
O-Hydroxycumene

2. HAZARDS IDENTIFICATION
Emergency Overview
Hazard Statements
ANSI signal word for this material is: DANGER

Per SARA 312 regulations this material represents the following health hazard(s): acute chronic

Per SARA 312 regulations this material is classified as a pure material.
General Fire Hazards
Vapors may form explosive mixture with air. Vapors may travel along the ground to some distant source of ignition and flash back.
Appearance
Clear, colorless to yellow liquid.
Overview
Each person who could potentially be exposed to this material, via any route of entry, while performing their assignments, routine and
non-routine; from piping; and/or during an emergency situation, should review this MSDS in order to better understand the hazards
associated with the material. Accordingly, please note an * in a HMIS庐 field indicates this material may potentially involve certain chronic
health issues such as cancer -- HMIS庐 is a registered trade and service mark of the NPCA. To work safely with this material: keep away
from heat and ignition sources do not get in eyes, on skin or clothing do not breath in material's vapors, dust, or fumes keep
container closed use with adequate ventilation -- do not enter any confined spaces without first verifying air quality wash thoroughly
after handling

Potential Health Effects
Health Dangers
eye burns skin burns
Health Warnings
lung irritant


Trade Name | ORTHO-ISO-PROPYLPHENOL MSDS ANSI2
1/ 6
Short # | Printed On | 10/11/2006
N/AP = Not Applicable N/A = Not Available
Health Cautions
may affect mucous membranes may cause nervous system effects may cause gastrointestinal disturbances

Environmental Concerns
Information for this material is not available. However, limited ingredient data, if available, is presented.


3. COMPOSITION / INFORMATION ON INGREDIENTS
CAS Weight Trade OSHA Capable of
Number Range Secret Hazardous Release
Ingredient Name
ORTHO-ISOPROPYLPHENOL 88-69-7 > 98 %


4. FIRST AID MEASURES
Skin
Immediately take off all contaminated clothing. For skin contact, flush with large amounts of water. If any adverse effects persist, get medical
attention. The signs and symptoms that may result from an emergency or an unexpected acute overexposure include: rash to irritation to burns
Eyes
For eye contact, rinse immediately with plenty of water. Seek medical advice. The signs and symptoms that may result from an
emergency or an unexpected acute overexposure include: irritation to burns
Inhalation
Move person to non-contaminated air. If not breathing, give artificial respiration, preferably mouth-to-mouth. If breathing is difficult, give
oxygen. Seek medical attention. The signs and symptoms that may result from an emergency or an unexpected acute overexposure
include: irritation -- respiratory tract
Ingestion
If the material is swallowed, get immediate medical attention or advice. Never give anything by mouth to a victim who is unconscious or is
having convulsions. If patient has a good gag reflex, you can consider giving several ounces of water for dilution. The signs and
symptoms that may result from an emergency or an unexpected acute overexposure include: nausea; vomiting; gastritis
Cardiovascular
The signs and symptoms that may result from an emergency or an unexpected acute overexposure include: arrhythmia
Central Nervous System
Monitor for shock; anticipate seizures and treat accordingly.

5. FIRE FIGHTING MEASURES
Flammable Properties
Substance Name % LEL % UEL
NA NA
ORTHO-ISO-PROPYLPHENOL
Sensitivity to Static Discharge
Material can accumulate static charges from material handling management. Bond and ground as appropriate. For additional recommendations,
consult an applicable guideline such as National Fire Protection Association [NFPA] 77, "Recommended Practices on Static Electricity". NOTE:
The Lower Explosive Limit [LEL] for organic liquids can range from as low as 0.5 - 1%.
Extinguishing Media
Dry chemical, foam, carbon dioxide, water fog.
Unsuitable Extinguishing Media
Do not use a solid water stream as it may scatter and spread fire.
Protection of Firefighters/Specific Hazards Arising from the Chemical
Exclude air; treat like a gasoline or oil fire. Wear full protective clothing, including helmet, self-contained positive pressure or pressure demand
breathing apparatus, protective clothing and face mask.


6. ACCIDENTAL RELEASE, SPILL, LEAK PROCEDURES
Personal Precautions
Follow facility/company's emergency plans.
Environmental Precautions
Stop the flow of material, if this is without risk. Eliminate sources of ignition. Ventilate the contaminated area. Contain the spill and
prevent the material from obtaining access to any confined spaces, public sewers, or waterways.
Methods for Clean-Up
Ventilate the contaminated area. Eliminate ignition sources including sources of electrical, static or frictional sparks. Collect the material
using absorbents, non-sparking tools, explosion-proof vacuums or other equipment required by the size of the release. Decontaminate
the area, collecting any cleaning and rinsing media for proper reclamation or disposal.
Trade Name | ORTHO-ISO-PROPYLPHENOL MSDS ANSI2
2/ 6
Short # | Printed On | 10/11/2006
N/AP = Not Applicable N/A = Not Available
Other Information
Wear appropriate protective equipment and clothing during clean-up. Determine appropriate course of action for the collected material.
Regulations vary. Consult local authorities before disposal.
Exposure Guidelines
All PPE use is to be determined by a qualified person.


7. HANDLING & STORAGE
Handling Procedures
Organics can obtain an electrostatic charge during processing activities including: mixing, filtering, or pumping which may represent a spark hazard
and, therefore, a fire hazard. Also, a sudden release of such materials from process equipment at elevated temperatures, and/or pressures, can
result in ignitions from static absent any apparent ignition source. Flashpoint and autoignition values obtained from standard test conditions may
not be applicable to other situations and, thus, the safe use of this material in any process should be reviewed by one familiar with both the
processing conditions and this material. As with all chemicals, good industrial hygiene practices should be followed when handling this material.
When the container(s) is empty it may retain product residue including vapors which could accumulate. Therefore, do not cut, drill, grind, or weld
empty containers. Additionally, do not conduct such activity(ies) near full, partially full, or empty product containers without appropriate workplace
safety authorization(s) or permit(s).
Storage Procedures
Protect container from physical abuse. Keep the container tightly closed. Keep this material in a cool, well-ventilated place. Store in a
area which is resistant to the potential corrosion this material can cause. Keep separate from incompatibles. Bond and ground
containers when transferring material. Do not handle or store near an open flame, heat or other sources of ignition. Do not cut, weld,
solder, drill, grind, or expose containers to heat, flame, sparks, or other sources of ignition. Empty product containers may contain
product residue. Do not reuse empty containers.


8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure Guidelines
All PPE use is to be determined by a qualified person.
Engineering Controls
Ventilation should be sufficient to effectively remove, and prevent buildup of, any vapors, dusts, or fumes that may be generated during
handling or thermal processing. In order to ensure appropriate electrical safety practices are followed, consult applicable standards.
These may include guidelines such as the National Fire Protection Association [NFPA] 70, "The National Electrical Code" and NFPA 499,
"Recommended Practice for the Classification of Combustible Dusts and of Hazardous (Classified) Locations for Electrical Installations in
Chemical Process Areas ". NOTE: since this material's vapors, dust or fumes can form explosive mixtures in air, ensure that any
potential areas where explosions may occur are designed to minimize potential damage. For recommendations to prevent such
explosions and associated damage, consult applicable guidelines such as NFPA 69, "Standard on Explosion Prevention Systems" and/or
NFPA 68, "Guide for Venting Deflagrations".

Personal Protective Equipment
Eye Protection
Wear safety glasses with side shields; chemical goggles (if splashing is possible). Wear a face shield if a splash hazard exists. Select & use eye
protection per a competent health & safety professional using: OSHA [29 CFR 1910.133] or Europe's [EN166].
Skin Protection
Use appropriate hand protection. Wear impervious gloves for prolonged contact.
Respiratory Protection
Maintain material's vapors, fumes, or particulate levels below any levels of concern including, for solids, considering the material as a
particulate not otherwise classified [nuisance dust] @ 10 mg/m3. Select & use respirators per a competent health & safety professional
using: OSHA (29 CFR 1910.134); ANSI (Z88.2-1992); or Europe's [EN 149].

9. PHYSICAL & CHEMICAL PROPERTIES
Liquid
Physical State

59 掳F
Melting Point ( 15 掳C )
414 掳F
Boiling Point ( 212 掳C )
192 掳F Tag Closed Cup
Flash Point ( 89 掳C )
Evaporation Rate

Combustible IIIA
Flammability Class
< 0.5 mmHg @ 25掳C
Vapor Pressure
>Air
Vapor Density
1.012 g/cm3
Specific Gravity
Slightly soluble [1-10%]
Solubility in Water



Trade Name | ORTHO-ISO-PROPYLPHENOL MSDS ANSI2
3/ 6
Short # | Printed On | 10/11/2006
N/AP = Not Applicable N/A = Not Available
136.21
Molecular Weight
C9-H12-O
Molecular Formula


10. STABILITY & REACTIVITY
Chemical Stability
Stable under normal conditions [e.g., 70掳F (21掳C) & 14.7 psig (760 mmHg)].
Conditions to Avoid
Avoid excessive heat and ignition sources.
Incompatible Materials
ORTHO-ISOPROPYLPHENOL may react with: acid anhydrides, acid chlorides and oxidizers.

Hazardous Decomposition Products
Upon decomposition this product emits carbon monoxide, carbon dioxide, and/or low molecular weight hydrocarbons.
Possibility of Hazardous Reactions
Will not occur under normal conditions [e.g., 70掳F (21掳C) & 14.7 psig (760 mmHg)].


11. TOXICOLOGICAL INFORMATION
Routes of Entry
eye contact skin contact inhalation ingestion
Target Organs
eyes skin respiratory system central nervous system
Absorption
occurs
Skin Contact
irritation -- moderate to severe
Eye Contact
irritation -- moderate to severe
Ingestion
gastrointestinal tract effects -- nausea, vomiting, severe irritation; central nervous system effects -- somnolence
Inhalation
respiratory system effects -- coughing, severe irritation, inflammation, wheezing, , spasm, pulmonary edema; central nervous system effects --
headache


12. ECOLOGICAL INFORMATION
Persistence and Degradability
Information for this material is not available. However, limited ingredient data, if available, is presented.
Mobility
The product is slightly soluble in water.


13. DISPOSAL CONSIDERATIONS
Disposal Instructions
Manage wastes to satisfy local, state & federal regulations.


14. TRANSPORT INFORMATION
Comments
NOTE: This section's data are provided as a guide to the overall classification of the product. However, transportation classifications may
be subject to change as, for example, with changes in package size. Consult shipper requirements under IMO, ICAO (IATA), TDG and
49 CFR to assure regulatory compliance. Additionally, please contact the Transportation & Regulatory Affairs Specialist with SI Group @
(518)-370-4200 if there are questions regarding the cleaning of containers, or vessels. Remember that the reuse, treatment, or disposal,
of any related residuals or wastes must be in accordance with all federal, state, and local environmental regulations.




Trade Name | ORTHO-ISO-PROPYLPHENOL MSDS ANSI2
4/ 6
Short # | Printed On | 10/11/2006
N/AP = Not Applicable N/A = Not Available
SURFACE TRANSPORTATION (HIGHWAY/RAIL)
BULK-- TANK TRUCK/TANK
CAR
Alkylphenols, liquid, n.o.s.
Shipping Name
8
Hazard Class
UN3145
Identification Number
PG III
Packing Group
DRUM(s)/BAG(s)
Alkylphenols, liquid, n.o.s.
Shipping Name
8
Hazard Class
UN3145
Identification Number
PG III
Packing Group
PAIL(s)/CAN(s)
Alkylphenols, liquid, n.o.s.
Shipping Name
8
Hazard Class
UN3145
Identification Number
PG III
Packing Group

IMDG CODE (WATER)
DRUM(s)/BAG(s)
ALKYLPHENOLS, LIQUID, N.O.S. (butylphenols)
Shipping Name
class 8
Hazard Class
UN3145
Identification Number
PG III
Packing Group
PAIL(s)/CAN(s)
ALKYLPHENOLS, LIQUID, N.O.S. (butylphenols)
Shipping Name
class 8
Hazard Class
UN3145
Identification Number
PG III
Packing Group

ICAO/IATA (AIR)
DRUM(s)/BAG(s)
Alkylphenols, liquid, n.o.s.
Shipping Name
8
Hazard Class
UN3145
Identification Number
III
Packing Group
PAIL(s)/CAN(s)
Alkylphenols, liquid, n.o.s.
Shipping Name
8
Hazard Class
UN3145
Identification Number
III
Packing Group


15. REGULATORY INFORMATION
FDA - Total Food Additives List Sourced from EAFUS
ORTHO-ISOPROPYLPHENOL 88-69-7 {Not Regulated under 21 CFR}
Superfund Amendments & Reauthorization Act of 1986
This material may be applicable to the SARA regulations. Thus, it may require you to file appropriate governmental reports if the total amount of
this material, or any of the listed constituents, in your possession ever exceeds the regulations' threshold values.
International Regulations
Inventory - European Union - European Inventory of Existing Commercial Chemical Substances (EINECS)
ORTHO-ISOPROPYLPHENOL 88-69-7 201-852-8
Inventory - Japan Existing and New Chemical Substances (ENCS)
ORTHO-ISOPROPYLPHENOL 88-69-7 3-503; 4-57
B3, E, D2B
WHMIS Ratings
European Classifications
This substance is considered hazardous per The Safety Data Sheets Directive (91/155/EC) as amended

EU Risk Phrases
Harmful by inhalation, in contact with skin and if swallowed.
R20/21/22

Trade Name | ORTHO-ISO-PROPYLPHENOL MSDS ANSI2
5/ 6
Short # | Printed On | 10/11/2006
N/AP = Not Applicable N/A = Not Available
EU Risk Phrases
Causes burns.
R34
Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
R51/53
EU Safety Phrases
Avoid contact with skin.
S24
Wear suitable protective clothing, gloves and eye/face protection.
S36/37/39
Avoid release to the environment. Refer to special instructions/safety data sheets.
S61

EU Symbol(s)




C - Corrosive N - Dangerous for the environment

Inventory Status
Country(s) or Region Inventory Name

Australia Australian Inventory of Chemical Substances (AICS)
China Inventory of Existing Chemical Substances in China (CCS)
All components of this product comply with the inventory requirements administered by the governing country(s)


16. OTHER INFORMATION
Disclaimer
The health and safety information is that available to SI Group as of the date published and SI Group makes no representation of the
information's completeness or accuracy. Any data provided is based on either: reference sources, testing performed on a representative
sample(s), or professional judgement. The physical data should not be construed as either representing specifications or a guaranteed
analysis. This material has been classified in accordance with the hazard criteria of the Controlled Products Regulation and the MSDS
contains information required by Controlled Products Regulation. SI Group provides its MSDS in several languages using English as the
primary language. While SI Group uses reasonable efforts to provide accurate translations, SI Group assumes no liability, or
responsibility, for errors, omissions or ambiguities in any translations. SI Group expects those persons who receive this MSDS to
exercise their independent professional judgement, or consult with a competent health/safety professional, to determine how to utilize this
material safely. This includes, but is not exclusive to, the material's appropriateness for a specific use, the type of personal protection
equipment necessary, and the use of engineering controls. In no event is SI Group liable for any damages whatsoever arising out of your
use of this material based upon information obtained from this MSDS including: direct, indirect, incidental, consequential or punitive
claims or damages.
10/11/2006 10/9/2006
Completed On Replaces Sheet Dated
HGW
Completed By
MSDS Sections Updated:
Chemical Product & Company Identification: Alternate Trade Names




Trade Name | ORTHO-ISO-PROPYLPHENOL MSDS ANSI2
6/ 6
Short # | Printed On | 10/11/2006
N/AP = Not Applicable N/A = Not Available

Search    ENTER KEYWORD

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC