Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

N/A

File Name: 00543501.asp
                                MATERIAL SAFETY DATA SHEET




1. CHEMICAL PRODUCT & COMPANY IDENTIFICATION
HAZARD RATINGS HMIS 庐 NFPA
Manufacturer/Supplier SI Group
P.O. Box 1046 Health 2* 1
, NY 12301 United States
Schenectady Flammability 1 1
Reactivity
Telephone Numbers - 24 Hour Emergency Assistance 0 0
PPE
1-(800)-424-9300 E
In USA -- CHEMTREC
NFPA Special Hazards
(703)-527-3887]
International [Call Collect]

Telephone Numbers - General Assistance
General 518-887-2400
Trade Name HRJ-1367

NAERG # 171

WHMIS Classifications D2A, D2B
CAS Number N/A

Chemical Name / Class HEAT REACTIVE PHENOLIC RESIN
Product Use Chemical intermediate

TSCA Status The material, or components, is either on the TSCA inventory list or is exempt from the requirement to be
listed.

Trade Secret This information is not considered to represent confidential business information to SI Group

2. HAZARDS IDENTIFICATION
Emergency Overview
Hazard Statements
ANSI signal word for this material is: DANGER

Per SARA 312 regulations this material represents the following health hazard(s): acute chronic

Per SARA 312 regulations this material is classified as a mixture.

Not classified as dangerous in the meaning of transport regulations.
General Fire Hazards
High concentration of airborne dust may form explosive mixture with air. Ensure that good housekeeping practices are followed as well
as guidelines such as the National Fire Protection Association [NFPA] 654, "Prevention of Fire and Dust Explosions from the
Manufacturing., Processing, and Handling of Combustible Particulate Solids". Vapors may be heavier than air and may travel along the
ground to some distant source of ignition and flash back.
Appearance
This material is in flaked form.
Emergency overview
Each person who could potentially be exposed to this material, via any route of entry, while performing their assignments, routine and
non-routine; from piping; and/or during an emergency situation, should review this MSDS in order to better understand the hazards
associated with the material. Accordingly, please note an * in a HMIS庐 field indicates this material may potentially involve certain chronic
health issues such as cancer -- HMIS庐 is a registered trade and service mark of the NPCA. To work safely with this material : keep
away from heat and ignition sources avoid contact with eyes, skin, or clothing avoid breathing material's vapors, dust, or fumes
keep container closed use with adequate ventilation -- do not enter any confined spaces without first verifying air quality wash
thoroughly after handling

Potential Health Effects
Health Dangers
per the NTP -- carcinogenicity reasonably anticipated per the IARC -- carcinogenic to humans per OSHA -- potential cancer hazard


Trade Name | HRJ-1367 MSDS ANSI2
1/ 9
Short # | Printed On | 3/25/2008
N/AP=Not Applicable N/A=Not Available
Health Warnings
lung irritant may cause respiratory sensitization may cause skin sensitization
Health Cautions
may cause eye irritation may cause skin irritation may affect mucous membranes may cause gastrointestinal disturbances

Environmental Concerns
Information for this material is not available. However, limited ingredient data, if available, is presented.
ETHYL BENZENE: Aquatic Toxicity: bluegill TLm = 29 ppm/96h; fathead minnow LC50 = 12.1 mg/l/96h; shrimp LC50 = 8736 mg/l/96h;
daphnia EC50 = 2.9 mg/l/48h; may bioconcentrate.

FORMALDEHYDE: Aquatic toxicity: trout LD = 50 ppm/24h; catfish TLM = 32 ppm/24h.

XYLENE: Aquatic Toxicity: bluegill TLm = 22 ppm/96h; rainbow trout LC50 = 13.5 mg/l/96h; low bioconcentration.



3. COMPOSITION / INFORMATION ON INGREDIENTS
CAS Weight Trade OSHA Capable of
Number Range Secret Hazardous Release
Ingredient Name

PHENOLIC RESIN N/A > 95 %
XYLENE 1330-20-7 <6% *
PARA-tertiary-BUTYLPHENOL 98-54-4 <1% *
ETHYL BENZENE 100-41-4 <1% *
FORMALDEHYDE 50-00-0 < 0.2 % *



4. FIRST AID MEASURES
Skin contact
Immediately take off all contaminated clothing. For skin contact, flush with large amounts of water. If any adverse effects persist, get medical
attention. The signs and symptoms that may result from an emergency or an unexpected acute overexposure include: irritation
Eye contact
For eye contact, rinse immediately with plenty of water. Seek medical advice. The signs and symptoms that may result from an
emergency or an unexpected acute overexposure include: irritation
Inhalation
Move person to non-contaminated air. If not breathing, give artificial respiration, preferably mouth-to-mouth. If breathing is difficult,
give oxygen. Seek medical attention. The signs and symptoms that may result from an emergency or an unexpected acute
overexposure include: irritation -- respiratory tract
Ingestion
If the material is swallowed, get immediate medical attention or advice. Never give anything by mouth to a victim who is unconscious or
is having convulsions. If patient has a good gag reflex, you can consider giving several ounces of water for dilution. The signs and
symptoms that may result from an emergency or an unexpected acute overexposure include: nausea ; vomiting ; diarrhea ; gastritis
Cardiovascular
The signs and symptoms that may result from an emergency or an unexpected acute overexposure include: arrhythmia
Central Nervous System
Monitor for shock; anticipate seizures and treat accordingly. The signs and symptoms that may result from an emergency or an
unexpected acute overexposure include: headache ; CNS depression ; coma ; convulsions
Medical Conditions Aggravated by Exposure to this Material
Provide general supportive measures and treat symptomatically. Please consider other resources such as a regional Poison Control
Center or web sites like the National Library of Medicine TOXNET @ http://toxnet.nlm.nih.gov. A specific antidote is not known. Some
of the symptoms presented may become life threatening if the exposure is a result of an emergency or an unexpected acute
overexposure. Additionally, some workers with certain pre-existing medical conditions such as: asthma, allergies, or impaired pulmonary
and/or liver functions, or who may be particularly susceptible to this material, may be affected by exposure to this material.


5. FIRE FIGHTING MEASURES
Flammable Properties
Substance Name % LEL % UEL
NA NA
HRJ-1367



Trade Name | HRJ-1367 MSDS ANSI2
2/ 9
Short # | Printed On | 3/25/2008
N/AP=Not Applicable N/A=Not Available
Sensitivity to Static Discharge
Material can accumulate static charges from material handling management. Bond and ground as appropriate. For additional recommendations,
consult an applicable guideline such as National Fire Protection Association [NFPA] 77, "Recommended Practices on Static Electricity". The
Minimum Ignition Energy for phenolic resins can be as low as 3 mJ [millijoules]. The Minimum Explosive Concentration for phenolic resins can be
as low as 0.025 oz/ft3 or ~20 g/m3.
Suitable extinguishing media
Dry chemical, foam, carbon dioxide, water fog.
Extinguishing media which must not be used for safety reasons
Do not use a solid water stream as it may scatter and spread fire.
Protection of Firefighters/Specific Hazards Arising from the Chemical
Exclude air; treat like a gasoline or oil fire. Wear full protective clothing, including helmet, self-contained positive pressure or pressure demand
breathing apparatus, protective clothing and face mask.


6. ACCIDENTAL RELEASE, SPILL, LEAK PROCEDURES
Personal Precautions
Follow facility/company's emergency plans.
Environmental Precautions
Stop the flow of material, if this is without risk. Eliminate sources of ignition. Ventilate the contaminated area. Contain the spill and
prevent the material from obtaining access to any confined spaces, public sewers, or waterways.
Methods for Clean-Up
Ventilate the contaminated area. Eliminate ignition sources including sources of electrical, static or frictional sparks. Sweep up, or
gather, material and place in appropriate container(s) applicable for ultimate transportation or disposal. Thoroughly clean the release
area with a suitable agent and collect any cleaning, rinsing media(s) for proper reclamation or disposal. Wear appropriate personal
protective equipment during cleanup activities.
Other Information
Wear appropriate protective equipment and clothing during clean-up. Determine appropriate course of action for the collected material.
Regulations vary. Consult local authorities before disposal.

Exposure Guidelines
All PPE use is to be determined by a qualified person.


7. HANDLING & STORAGE
Handling
Guard against dust accumulation of this material. As with all chemicals, good industrial hygiene practices should be followed when handling this
material. When the container(s) is empty it may retain product residue including vapors which could accumulate. Therefore, do not cut, drill,
grind, or weld empty containers. Additionally, do not conduct such activity(ies) near full, partially full, or empty product containers without
appropriate workplace safety authorization(s) or permit(s).
Storage
Protect container from physical abuse. Keep the container tightly closed. Store in a cool, dry, well-ventilated storage area. Keep
separate from incompatibles. Bond and ground containers when transferring material. Empty product containers may contain product
residue. Do not reuse empty containers.




Trade Name | HRJ-1367 MSDS ANSI2
3/ 9
Short # | Printed On | 3/25/2008
N/AP=Not Applicable N/A=Not Available
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure Guidelines
All PPE use is to be determined by a qualified person.
ACGIH - Threshold Limits Values - Ceilings (TLV-C)
FORMALDEHYDE 50-00-0 0.3 ppm Ceiling
ACGIH - Threshold Limits Values - Short Term Exposure Limits (TLV-STEL)
ETHYL BENZENE 100-41-4 125 ppm STEL
XYLENE 1330-20-7 150 ppm STEL
ACGIH - Threshold Limits Values - Time Weighted Averages (TLV-TWA)
ETHYL BENZENE 100-41-4 100 ppm TWA
XYLENE 1330-20-7 100 ppm TWA
AEL/REL [Acceptable/Recommended Exposure Limit]
FORMALDEHYDE 50-00-0 REL: TWA = 0.3 ppm; STEL = 0.6 ppm [Rohm & Haas]
Canada - Ontario - Occupational Exposure Limits - STEVs
ETHYL BENZENE 100-41-4 125 ppm STEV; 540 mg/m3 STEV
FORMALDEHYDE 50-00-0 2 ppm STEV; 3 mg/m3 STEV
XYLENE 1330-20-7 150 ppm STEV; 650 mg/m3 STEV
Canada - Ontario - Occupational Exposure Limits - TWAEVs
ETHYL BENZENE 100-41-4 100 ppm TWAEV; 435 mg/m3 TWAEV
FORMALDEHYDE 50-00-0 1 ppm TWAEV; 1.5 mg/m3 TWAEV
XYLENE 1330-20-7 100 ppm TWAEV; 435 mg/m3 TWAEV
U.S. - OSHA - Final PELs - Short Term Exposure Limits
FORMALDEHYDE 50-00-0 2 ppm STEL (see 29 CFR 1910.1048)
U.S. - OSHA - Final PELs - Time Weighted Averages (TWAs)
ETHYL BENZENE 100-41-4 100 ppm TWA; 435 mg/m3 TWA
FORMALDEHYDE 50-00-0 0.75 ppm TWA
XYLENE 1330-20-7 100 ppm TWA; 435 mg/m3 TWA
U.S. - OSHA - Specifically Regulated Chemicals
FORMALDEHYDE 50-00-0 0.5 ppm Action Level; 0.75 ppm TWA; 2 ppm STEL (Irritant
and potential cancer hazard - see 29 CFR 1910.1048)

Engineering Controls
Ventilation should be sufficient to effectively remove, and prevent buildup of, any vapors, dusts, or fumes that may be generated during
handling or thermal processing. In order to ensure appropriate electrical safety practices are followed, consult applicable standards.
These may include guidelines such as the National Fire Protection Association [NFPA] 70, "The National Electrical Code" and NFPA 499,
"Recommended Practice for the Classification of Combustible Dusts and of Hazardous (Classified) Locations for Electrical Installations in
Chemical Process Areas ". NOTE: since this material's vapors, dust or fumes can form explosive mixtures in air, ensure that any potential
areas where explosions may occur are designed to minimize potential damage. For recommendations to prevent such explosions and
associated damage, consult applicable guidelines such as NFPA 69, "Standard on Explosion Prevention Systems" and/or NFPA 68, "Guide
for Venting Deflagrations".

Personal Protective Equipment
Eye Protection
Wear safety glasses with side shields; chemical goggles (if splashing is possible). Wear a face shield if a splash hazard exists. Select & use eye
protection per a competent health & safety professional using: OSHA [29 CFR 1910.133] or Europe's [EN166].
Skin and body protection
Use appropriate hand protection. Wear impervious gloves for prolonged contact.
Respiratory Protection
Maintain material's vapors, fumes, or particulate levels below any levels of concern including, for solids, considering the material as a
particulate not otherwise classified [nuisance dust] @ 10 mg/m3. Select & use respirators per a competent health & safety professional
using: OSHA (29 CFR 1910.134); ANSI (Z88.2-1992); or Europe's [EN 149].

9. PHYSICAL & CHEMICAL PROPERTIES
Physical State Solid

Melting Point 203 掳F
( 95 掳C )
Flash Point > 201 掳F Tag Closed Cup
( > 94 掳C )
Evaporation Rate

Trade Name | HRJ-1367 MSDS ANSI2
4/ 9
Short # | Printed On | 3/25/2008
N/AP=Not Applicable N/A=Not Available
Flammability Class Combustible IIIB
Vapor Pressure N/A
Vapor Density >Air

Specific Gravity 1.1 g/cm3
Solubility in Water Not very soluble [<1%]
lbs/Gal 9.2



10. STABILITY & REACTIVITY
Stability
Stable under normal conditions [e.g., 70掳F (21掳C) & 14.7 psig (760 mmHg)].
Conditions to Avoid
Avoid ignition sources where dust is produced.
Incompatible Materials
This material may react with: strong oxidizing agents ; strong alkalies
Hazardous Decomposition Products
Upon decomposition this product emits carbon monoxide, carbon dioxide, and/or low molecular weight hydrocarbons. Phenolic vapors may be
released upon decomposition.
Possibility of Hazardous Reactions
Will not occur under normal conditions [e.g., 70掳F (21掳C) & 14.7 psig (760 mmHg)].


11. TOXICOLOGICAL INFORMATION
Overview
While OSHA 29 CFR 1910.1200 emphasizes the use of industrial -- human -- data for workplace hazard evaluations, relatively few materials have
such data available as toxicological information is primarily obtained from tests conducted on, or with, animals used as surrogates for humans.
Therefore, the effects and symptoms represented, and/or summarized, may not reflect actual workplace exposures. All materials used in a given
work area should be evaluated by a competent person who can then advise involved workers of health effects, or symptoms, if any, they may
experience from their assigned tasks.
Routes of Entry
inhalation ingestion eye contact skin contact
Target Organs
respiratory system eyes skin
Skin Contact

Dermal LD50s
ETHYL BENZENE 100-41-4 Dermal LD50 [rabbit]: 4100 mg/kg
FORMALDEHYDE 50-00-0 Dermal LD50 [rabbit]: 270 mg/kg
PARA-tertiary-BUTYLPHENOL 98-54-4 Dermal LD50 [rabbit]: 2520 mg/kg
XYLENE 1330-20-7 Dermal LD50 [rabbit]: >1700 mg/kg
Ingestion

Oral LD50
ETHYL BENZENE 100-41-4 Oral LD50 [rat]: 3500 mg/kg
FORMALDEHYDE 50-00-0 Oral LD50 [rat]: 100 mg/kg
PARA-tertiary-BUTYLPHENOL 98-54-4 Oral LD50 [rat]: 5660 mg/kg
XYLENE 1330-20-7 Oral LD50 [rat]: 4300 mg/kg
Inhalation

Inhalation LC50s
FORMALDEHYDE 50-00-0 Inhalation LC50 [rat]: 165 ppm
XYLENE 1330-20-7 Inhalation LC50 [rat]: 5000 ppm/4h
Inhalation LCLo
ETHYL BENZENE 100-41-4 Inhalation LCLo [rat]: 4000 ppm/4h




Trade Name | HRJ-1367 MSDS ANSI2
5/ 9
Short # | Printed On | 3/25/2008
N/AP=Not Applicable N/A=Not Available
Carcinogenicity

ACGIH - Threshold Limits Values - Carcinogens
ETHYL BENZENE 100-41-4 A3 - Confirmed animal carcinogen with unknown relevance
to humans
FORMALDEHYDE 50-00-0 A2 - Suspected Human Carcinogen
XYLENE 1330-20-7 A4 - Not Classifiable as a Human Carcinogen
IARC - Group 1 (Carcinogenic to Humans)
FORMALDEHYDE 50-00-0 Monograph 88 [2006], Monograph 62 [1995], Supplement 7
[1987]
IARC - Group 2B (Possibly Carcinogenic to Humans)
ETHYL BENZENE 100-41-4 Monograph 77 [2000]
IARC - Group 3 (Not Classifiable)
XYLENE 1330-20-7 Monograph 71 [1999], Monograph 47 [1989]
NTP (National Toxicology Program) - Report on Carcinogens - Reasonably Anticipated to be Human
Carcinogens
FORMALDEHYDE 50-00-0 Reasonably Anticipated To Be A Carcinogen
U.S. - OSHA - Hazard Communication Carcinogens
ETHYL BENZENE 100-41-4 Present
FORMALDEHYDE 50-00-0 Present




12. ECOLOGICAL INFORMATION
Environmental Concerns
Information for this material is not available. However, limited ingredient data, if available, is presented.
ETHYL BENZENE: Aquatic Toxicity: bluegill TLm = 29 ppm/96h; fathead minnow LC50 = 12.1 mg/l/96h; shrimp LC50 = 8736 mg/l/96h; daphnia
EC50 = 2.9 mg/l/48h; may bioconcentrate.

FORMALDEHYDE: Aquatic toxicity: trout LD = 50 ppm/24h; catfish TLM = 32 ppm/24h.

XYLENE: Aquatic Toxicity: bluegill TLm = 22 ppm/96h; rainbow trout LC50 = 13.5 mg/l/96h; low bioconcentration.


Persistence / degradability
While the ecological properties of this material have not been fully evaluated, it is likely that this material biodegrades slowly.

PARA-tertiary-BUTYLPHENOL: Terrestrial Fate: minimal biodegradation. Aquatic Fate: low biodegradation [BOD3 ~11%].

ETHYL BENZENE: Terrestrial Fate: volatilizes; leaches; biodegrades slowly. Aquatic Fate: volatilizes [half-lives: river ~ 2 hours; lake ~4 days];
biodegrades slowly [BOD5 ~3%; BOD7 = as high as 85%]. Atmospheric Fate: photochemically degrades [half-life ~55 hours].

FORMALDEHYDE: Terrestrial Fate: biodegrades; low volatilization; leaches. Aquatic Fate: biodegradable [48 - 72 hours]; low volatilization.
Atmospheric Fate: photochemically degrades [half-life -- a few hours].

XYLENE: Terrestrial Fate: leaches; slow biodegradation. Aquatic Fate: slow biodegradation [BOD5: 40 - 80%]; volatilizes [half-lives: river ~ 3
hours; lake ~ 100 hours]. Atmospheric Fate: photochemically degrades [half-life: 1 - 2 days].
Mobility
The product is essentially insoluble in water.


13. DISPOSAL CONSIDERATIONS
Disposal Instructions
Manage wastes to satisfy local, state & federal regulations. This material will not be a RCRA hazardous waste if disposed as shipped by SI Group.
U.S. - CERCLA/SARA - Hazardous Substances and their Reportable Quantities
ETHYL BENZENE 100-41-4 1000 lb final RQ; 454 kg final RQ
FORMALDEHYDE 50-00-0 100 lb final RQ; 45.4 kg final RQ
XYLENE 1330-20-7 100 lb final RQ; 45.4 kg final RQ
U.S. - New York - Reporting of Releases Part 597 - List of Hazardous Substances
ETHYL BENZENE 100-41-4 1000 lb RQ (air); 1 lb RQ (land/water)
FORMALDEHYDE 50-00-0 100 lb RQ (air); 1 lb RQ (land/water)
XYLENE 1330-20-7 1000 lb RQ (air); 1 lb RQ (land/water)


Trade Name | HRJ-1367 MSDS ANSI2
6/ 9
Short # | Printed On | 3/25/2008
N/AP=Not Applicable N/A=Not Available
14. TRANSPORT INFORMATION
Comments
NOTE: This section's data are provided as a guide to the overall classification of the product. However, transportation classifications may
be subject to change as, for example, with changes in package size. Consult shipper requirements under IMO, ICAO (IATA), TDG and 49
CFR to assure regulatory compliance. Additionally, please contact the Transportation & Regulatory Affairs Specialist with SI Group @
(518)-370-4200 if there are questions regarding the cleaning of containers, or vessels. Remember that the reuse, treatment, or disposal,
of any related residuals or wastes must be in accordance with all federal, state, and local environmental regulations.

SURFACE TRANSPORTATION (HIGHWAY/RAIL)
DRUM(s)/BAG(s)
Shipping Name Resin, coal tar or petroleum,
not DOT hazardous
PAIL(s)/CAN(s)
Shipping Name Resin, coal tar or petroleum,
not DOT hazardous

IMDG CODE (WATER)
DRUM(s)/BAG(s)
Shipping Name Resin, coal tar or petroleum,
non-dangerous
PAIL(s)/CAN(s)
Shipping Name Resin, coal tar or petroleum,
non-dangerous

ICAO/IATA (AIR)
DRUM(s)/BAG(s)
Shipping Name Resin, coal tar or petroleum,
not restricted
PAIL(s)/CAN(s)
Shipping Name Resin, coal tar or petroleum,
not restricted


15. REGULATORY INFORMATION
U.S. - CAA (Clean Air Act) - 1990 Hazardous Air Pollutants
ETHYL BENZENE 100-41-4 Present
FORMALDEHYDE 50-00-0 Present
XYLENE 1330-20-7 Present
U.S. - CAA (Clean Air Act) - Accidental Release Prevention - Toxic Substances
FORMALDEHYDE 50-00-0 15000 lbs threshold quantity (Solution)
U.S. - CAA (Clean Air Act) - HON Rule - Organic HAPs
ETHYL BENZENE 100-41-4 Present
FORMALDEHYDE 50-00-0 Present
XYLENE 1330-20-7 Present
U.S. - CAA (Clean Air Act) - HON Rule - SOCMI Chemicals
ETHYL BENZENE 100-41-4 Group I
FORMALDEHYDE 50-00-0 Group I
XYLENE 1330-20-7 Group I
U.S. - CAA (Clean Air Act) - Volatile Organic Compounds (VOCs) in SOCMI
ETHYL BENZENE 100-41-4 Present
FORMALDEHYDE 50-00-0 Present
XYLENE 1330-20-7 Present
OSHA Materials that May be Capable of Release (29 CFR 1910.1200(d)(5)(i)(iv))
Depending on the concentrations that may be released from this material, vapors may be heavier than air, may concentrate; and may travel along
the ground to some source of ignition including static electricity. The composite potential health hazards of the substance(s) marked as capable
of release include: potential cancer hazard eye burns skin burns harmful if absorbed thru skin harmful if inhaled lung irritant
has tested positive as a mutagen may cause reproductive system effects may affect the liver may affect the kidneys may be a
teratogen may cause respiratory sensitization may cause skin sensitization may affect the female's reproductive capabilities may effect
the nervous system may cause blood chemistry changes may affect mucous membranes may cause allergic response may cause
gastrointestinal disturbances may affect the heart may cause leucoderma may affect the urinary tract

Trade Name | HRJ-1367 MSDS ANSI2
7/ 9
Short # | Printed On | 3/25/2008
N/AP=Not Applicable N/A=Not Available
Superfund Amendments & Reauthorization Act of 1986
This material may be applicable to the SARA regulations. Thus, it may require you to file appropriate governmental reports if the total amount of
this material, or any of the listed constituents, in your possession ever exceeds the regulations' threshold values.

U.S. - CERCLA/SARA - Section 302 Extremely Hazardous Substances TPQs
FORMALDEHYDE 50-00-0 500 lb TPQ
U.S. - CERCLA/SARA - Section 313 - Emission Reporting
ETHYL BENZENE 100-41-4 0.1 % de minimis concentration
FORMALDEHYDE 50-00-0 0.1 % de minimis concentration
XYLENE 1330-20-7 1.0 % de minimis concentration
State Regulations

U.S. - California - 8 CCR Section 339 - Director's List of Hazardous Substances
ETHYL BENZENE 100-41-4 Present
FORMALDEHYDE 50-00-0 Present
XYLENE 1330-20-7 Present
U.S. - California - Proposition 65 - Carcinogens List
ETHYL BENZENE 100-41-4 carcinogen, initial date 6/11/04
FORMALDEHYDE 50-00-0 carcinogen, initial date 1/1/88 (gas)
U.S. - California - Proposition 65 - No Significant Risk Levels (NSRL)
FORMALDEHYDE 50-00-0 40 碌g/day NSRL
U.S. - New Jersey - Environmental Hazardous Substances List
ETHYL BENZENE 100-41-4 SN 0851 TPQ 500 lb
FORMALDEHYDE 50-00-0 SN 0946 TPQ 500 lb
XYLENE 1330-20-7 SN 2014 TPQ 500 lb
U.S. - New Jersey - Right to Know Hazardous Substance List
ETHYL BENZENE 100-41-4 sn 0851
FORMALDEHYDE 50-00-0 sn 0946
PARA-tertiary-BUTYLPHENOL 98-54-4 sn 2101
XYLENE 1330-20-7 sn 2014
U.S. - New Jersey - Special Health Hazards Substances List
ETHYL BENZENE 100-41-4 flammable - third degree
FORMALDEHYDE 50-00-0 carcinogen; mutagen
XYLENE 1330-20-7 flammable - third degree
International Regulations

Canada - 2005 NPRI (National Pollutant Release Inventory)
ETHYL BENZENE 100-41-4 Part 1, Group 1 Substance
FORMALDEHYDE 50-00-0 Part 1, Group 1 Substance; Part 5 Substance
XYLENE 1330-20-7 Part 1, Group 1 Substance; Part 5 Substance
Canada - WHMIS - Ingredient Disclosure List
ETHYL BENZENE 100-41-4 0.1 %
FORMALDEHYDE 50-00-0 0.1 %
PARA-tertiary-BUTYLPHENOL 98-54-4 1%
WHMIS Ratings D2A, D2B

European Classifications
This substance is considered hazardous per The Safety Data Sheets Directive (91/155/EC) as amended

EU Risk Phrases
Irritating to eyes, respiratory system and skin.
R36/37/38
May cause sensitization by skin contact.
R43
EU Safety Phrases
Do not breathe dust.
S22
Avoid contact with skin and eyes.
S24/25
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S26
Wear suitable gloves.
S37




Trade Name | HRJ-1367 MSDS ANSI2
8/ 9
Short # | Printed On | 3/25/2008
N/AP=Not Applicable N/A=Not Available
EU Symbol(s)




Xi - Irritant


16. OTHER INFORMATION
Disclaimer
The health and safety information is that available to SI Group as of the date published and SI Group makes no representation of the
information's completeness or accuracy. Any data provided is based on either: reference sources, testing performed on a representative
sample(s), or professional judgement. The physical data should not be construed as either representing specifications or a guaranteed
analysis. This material has been classified in accordance with the hazard criteria of the Controlled Products Regulation and the MSDS
contains information required by Controlled Products Regulation. SI Group provides its MSDS in several languages using English as the
primary language. While SI Group uses reasonable efforts to provide accurate translations, SI Group assumes no liability, or
responsibility, for errors, omissions or ambiguities in any translations. SI Group expects those persons who receive this MSDS to exercise
their independent professional judgement, or consult with a competent health/safety professional, to determine how to utilize this
material safely. This includes, but is not exclusive to, the material's appropriateness for a specific use, the type of personal protection
equipment necessary, and the use of engineering controls. In no event is SI Group liable for any damages whatsoever arising out of
your use of this material based upon information obtained from this MSDS including: direct, indirect, incidental, consequential or punitive
claims or damages.

Completed On 3/25/2008 Replaces Sheet Dated 11/29/2007
Completed By HGW
MSDS Sections Updated:
Composition / Information on Ingredients: List of Ingredients
Disposal Considerations: U.S. EPA Waste Number Instructions




Trade Name | HRJ-1367 MSDS ANSI2
9/ 9
Short # | Printed On | 3/25/2008
N/AP=Not Applicable N/A=Not Available

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
00034301.asp 2772-45-4
00039200.asp N/A
00042500.asp 73936-80-8
00044601.asp 88-69-7
00052101.asp 108-68-9
00075600.asp N/A
00076400.asp N/A
00145800.asp N/A
00204001.asp N/A
00204002.asp N/A
00240200.asp 210555-94-5
00240201.asp 210555-94-5
00289401.asp N/A
00339500.asp N/A
00384403.asp N/A
00390800.asp N/A
00406301.asp N/A
00427700.asp N/A
00445100.asp N/A
00448400.asp N/A
00479000.asp N/A
00483601.asp N/A
00498800.asp N/A
00507200.asp N/A
00511600.asp N/A
00519000.asp N/A
00519400.asp N/A
00521001.asp N/A
00536100.asp N/A
00543501.asp N/A
00575201.asp N/A
00582100.asp N/A
00585801.asp N/A
00585803.asp N/A

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Powered by BiziUp.com