Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

N/A

File Name: bindingsource_com---1751_msds.asp
3M MATERIAL SAFETY DATA SHEET Scotch-Weld (TM) 1751 B/A Epoxy Adhesive                  12/02/2003




Material Safety Data Sheet
Copyright, 2003, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly
utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is
obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit
thereon.



PRODUCT NAME: Scotch-Weld (TM) 1751 B/A Epoxy Adhesive
MANUFACTURER: 3M
DIVISION: Industrial Adhesives and Tapes

ADDRESS: 3M Center
St. Paul, MN 55144-1000

EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)

Issue Date: 12/02/2003
Supercedes Date: 05/29/2001

Document Group: 11-3162-2

ID Number(s):
62-1751-0530-3, 62-1751-0535-2, 62-1751-5430-1, 62-1751-6430-0, 62-1751-7430-9

This product is a kit or a multipart product which consists of multiple, independently packaged components. An MSDS for
each of these components is included. Please do not separate the component MSDSs from this cover page. The document
numbers of the MSDSs for components of this product are:

10-3135-0, 10-3128-5



No revision information is available.

DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. 3M
MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF
TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of
use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely
within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a
particular purpose and suitable for user's method of use or application.

3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may
have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy.
In addition, information obtained from a database may not be as current as the information in the MSDS available directly from 3M.




Page 1 of 1
3M MATERIAL SAFETY DATA SHEET Scotch-Weld (TM) 1751 B/A Epoxy Adhesive (Part B) 10/01/2004




Material Safety Data Sheet
Copyright, 2004, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly
utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is
obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit
thereon.

SECTION 1: PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: Scotch-Weld (TM) 1751 B/A Epoxy Adhesive (Part B)
MANUFACTURER: 3M
DIVISION: Industrial Adhesives and Tapes

ADDRESS: 3M Center
St. Paul, MN 55144-1000

EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)

Issue Date: 10/01/2004
Supercedes Date: 12/02/2003

Document Group: 10-3128-5

Product Use:
Specific Use: Base for two-part epoxy adhesive


SECTION 2: INGREDIENTS
Ingredient C.A.S. No. % by Wt
EPOXY RESIN 25068-38-6 40 - 70
ALUMINUM PIGMENTS 7429-90-5 15 - 40
CLAY 68953-58-2 7 - 13
N-BUTYL GLYCIDYL ETHER 2426-08-6 5 - 10
AMORPHOUS SILICA 7631-86-9 1- 5
RESORCINOL 108-46-3 0.5 - 1.5



SECTION 3: HAZARDS IDENTIFICATION
3.1 EMERGENCY OVERVIEW
Specific Physical Form: Viscous
Odor, Color, Grade: gray, little odor
General Physical Form: Liquid
Immediate health, physical, and environmental hazards: May cause allergic skin reaction. May cause target organ
effects.

3.2 POTENTIAL HEALTH EFFECTS


_________________________________________________________________________________________________
Page 1 of 8
3M MATERIAL SAFETY DATA SHEET Scotch-Weld (TM) 1751 B/A Epoxy Adhesive (Part B) 10/01/2004



Eye Contact:
Moderate Eye Irritation: Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision.

Vapors from heated material may cause eye irritation. Signs/symptoms may include redness, swelling, pain, tearing, and blurred or
hazy vision.

Dust created by cutting, grinding, sanding, or machining may cause eye irritation. Signs/symptoms may include redness, swelling,
pain, tearing, and blurred or hazy vision.


Skin Contact:
Moderate Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, and dryness.


Prolonged or repeated exposure may cause:
Allergic Skin Reaction (non-photo induced): Signs/symptoms may include redness, swelling, blistering, and itching.




Inhalation:
Vapors from heated material may cause irritation of the respiratory system. Signs/symptoms may include cough, sneezing, nasal
discharge, headache, hoarseness, and nose and throat pain.

Dust from cutting, grinding, sanding or machining may cause irritation of the respiratory system. Signs/symptoms may include cough,
sneezing, nasal discharge, headache, hoarseness, and nose and throat pain.

May be absorbed following inhalation and cause target organ effects.


Ingestion:
Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, nausea, diarrhea and vomiting.

May be absorbed following ingestion and cause target organ effects.


Target Organ Effects:
Central Nervous System (CNS) Depression: Signs/symptoms may include headache, dizziness, drowsiness, incoordination, nausea,
slowed reaction time, slurred speech, giddiness, and unconsciousness.




SECTION 4: FIRST AID MEASURES
4.1 FIRST AID PROCEDURES
The following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices are
followed.

Eye Contact: Flush eyes with large amounts of water. If signs/symptoms persist, get medical attention.

Skin Contact: Remove contaminated clothing and shoes. Immediately flush skin with large amounts of water. Get medical
attention. Wash contaminated clothing and clean shoes before reuse.


_________________________________________________________________________________________________
Page 2 of 8
3M MATERIAL SAFETY DATA SHEET Scotch-Weld (TM) 1751 B/A Epoxy Adhesive (Part B) 10/01/2004



Inhalation: If signs/symptoms develop, remove person to fresh air. If signs/symptoms persist, get medical attention.

If Swallowed: Do not induce vomiting. Give victim two glasses of water. Never give anything by mouth to an unconscious
person. Get immediate medical attention.

SECTION 5: FIRE FIGHTING MEASURES

5.1 FLAMMABLE PROPERTIES
No Data Available
Autoignition temperature
Not Applicable
Flash Point
Not Applicable
Flammable Limits - LEL
Not Applicable
Flammable Limits - UEL


5.2 EXTINGUISHING MEDIA
Material will not burn.

5.3 PROTECTION OF FIRE FIGHTERS
Special Fire Fighting Procedures: Water may be used to blanket the fire. Wear full protective equipment (Bunker Gear) and a
self-contained breathing apparatus (SCBA).

Unusual Fire and Explosion Hazards: Not applicable.

Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and thermal decomposition
information.


SECTION 6: ACCIDENTAL RELEASE MEASURES
Accidental Release Measures: Evacuate unprotected and untrained personnel from hazard area. The spill should be cleaned up by
qualified personnel. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in
accordance with good industrial hygiene practice. Warning! A motor could be an ignition source and could cause flammable gases or
vapors in the spill area to burn or explode. Contain spill. For larger spills, cover drains and build dikes to prevent entry into sewer
systems or bodies of water. Collect as much of the spilled material as possible. Place in a closed container approved for
transportation by appropriate authorities.

In the event of a release of this material, the user should determine if the release qualifies as reportable according to
local, state, and federal regulations.



SECTION 7: HANDLING AND STORAGE

7.1 HANDLING
Avoid breathing of dust created by cutting, sanding, grinding or machining. Avoid breathing of vapors, mists or spray. Do not eat,
drink or smoke when using this product. Wash exposed areas thoroughly with soap and water. For industrial or professional use only.
Avoid contact with oxidizing agents.

7.2 STORAGE
Store away from acids. Store away from oxidizing agents.



_________________________________________________________________________________________________
Page 3 of 8
3M MATERIAL SAFETY DATA SHEET Scotch-Weld (TM) 1751 B/A Epoxy Adhesive (Part B) 10/01/2004




SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION

8.1 ENGINEERING CONTROLS
Use with appropriate local exhaust ventilation. Provide appropriate local exhaust for cutting, grinding, sanding or machining.

8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE)
8.2.1 Eye/Face Protection
The following eye protection(s) are recommended: Safety Glasses with side shields, Indirect Vented Goggles.

8.2.2 Skin Protection
Avoid skin contact.

Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with
your glove and/or protective clothing manufacturer for selection of appropriate compatible materials.
Gloves made from the following material(s) are recommended: Polyethylene/Ethylene Vinyl Alcohol.

8.2.3 Respiratory Protection
Avoid breathing of dust created by cutting, sanding, grinding or machining. Avoid breathing of vapors, mists or spray.
Select one of the following NIOSH approved respirators based on airborne concentration of contaminants and in accordance with
OSHA regulations: Half facepiece or fullface air-purifying respirator with P100 particulate filters, Half facepiece or fullface air-
purifying respirator with P95 particulate filters, Half facepiece or fullface air-purifying respirator with N95 particulate filters.
Consult the current 3M Respiratory Selection Guide for additional information or call 1-800-243-4630 for 3M technical assistance.

8.2.4 Prevention of Swallowing
Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water.

8.3 EXPOSURE GUIDELINES
Ingredient Authority Type Limit Additional Information
RESORCINOL ACGIH TWA 10 ppm Table A4
RESORCINOL ACGIH STEL 20 ppm Table A4
RESORCINOL OSHA TWA 10 ppm Table Z-1A
RESORCINOL OSHA STEL 20 ppm Table Z-1A
ALUMINUM PIGMENTS ACGIH TWA 10 mg/m3
ALUMINUM PIGMENTS OSHA TWA, respirable 5 mg/m3 Table Z-1
ALUMINUM PIGMENTS OSHA TWA, as total dust 15 mg/m3 Table Z-1
ALUMINUM PYRO POWDERS ACGIH TWA, as Al 5 mg/m3
ALUMINUM PYRO POWDERS OSHA TWA, as Al 5 mg/m3 Table Z-1A
N-BUTYL GLYCIDYL ETHER ACGIH TWA 25 ppm
N-BUTYL GLYCIDYL ETHER OSHA TWA, Vacated 25 ppm
N-BUTYL GLYCIDYL ETHER OSHA TWA 50 ppm Table Z-1
AMORPHOUS SILICA CMRG TWA, as respirable 3 mg/m3
dust
VAC Vacated PEL:Vacated Permissible Exposure Limits [PEL] are enforced as the OSHA PEL in some states. Check with your local
regulatory agency.

SOURCE OF EXPOSURE LIMIT DATA:
ACGIH: American Conference of Governmental Industrial Hygienists
CMRG: Chemical Manufacturer Recommended Guideline
OSHA: Occupational Safety and Health Administration
AIHA: American Industrial Hygiene Association Workplace Environmental Exposure Level (WEEL)



SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES

_________________________________________________________________________________________________
Page 4 of 8
3M MATERIAL SAFETY DATA SHEET Scotch-Weld (TM) 1751 B/A Epoxy Adhesive (Part B) 10/01/2004




Viscous
Specific Physical Form:
gray, little odor
Odor, Color, Grade:
Liquid
General Physical Form:
No Data Available
Autoignition temperature
Not Applicable
Flash Point
Not Applicable
Flammable Limits - LEL
Not Applicable
Flammable Limits - UEL
Not Applicable
Boiling point
1.3 g/ml
Density
Not Applicable
Vapor Density

Not Applicable
Vapor Pressure

1.3 [Ref Std: WATER=1]
Specific Gravity
Not Applicable
pH
Not Applicable
Melting point

Negligible
Solubility in Water
Not Applicable
Evaporation rate
0 g/l [Details: CONDITIONS: SCAQMD Rule 443.1 Calculation]
Volatile Organic Compounds
0.00 % weight
Percent volatile
0 g/l [Details: CONDITIONS: SCAQMD Rule 443.1 Calculation]
VOC Less H2O & Exempt Solvents
100000 centipoise [@ 73.4000000000 潞F] [Details: MITS data]
Viscosity


SECTION 10: STABILITY AND REACTIVITY
Stability: Stable.

Materials and Conditions to Avoid: Strong acids; Strong oxidizing agents; Heat is generated during cure. Do not cure a mass larger
than 50 grams in a confined space to prevent a premature reaction (exothem) with production of intense heat and smoke.


Hazardous Polymerization: Hazardous polymerization will not occur.


Hazardous Decomposition or By-Products
Substance Condition
Aldehydes During Combustion
Hydrocarbons During Combustion
Carbon monoxide During Combustion
Carbon dioxide During Combustion
Ketones During Combustion



SECTION 11: TOXICOLOGICAL INFORMATION
Please contact the address listed on the first page of the MSDS for Toxicological Information on this material and/or its
components.



SECTION 12: ECOLOGICAL INFORMATION

_________________________________________________________________________________________________
Page 5 of 8
3M MATERIAL SAFETY DATA SHEET Scotch-Weld (TM) 1751 B/A Epoxy Adhesive (Part B) 10/01/2004




ECOTOXICOLOGICAL INFORMATION
Not determined.

CHEMICAL FATE INFORMATION
Not determined.


SECTION 13: DISPOSAL CONSIDERATIONS
Waste Disposal Method: Dispose of completely cured (or polymerized) material in a facility permitted to accept chemical wastes.
Incinerate in an industrial or commercial facility in the presence of a combustible material. As a disposal alternative, dispose of waste
product in a facility permitted to accept chemical waste.

EPA Hazardous Waste Number (RCRA): Not regulated

Since regulations vary, consult applicable regulations or authorities before disposal.


SECTION 14:TRANSPORT INFORMATION
ID Number(s):
62-1751-8530-5




Please contact the emergency numbers listed on the first page of the MSDS for Transportation Information for this
material.


SECTION 15: REGULATORY INFORMATION
US FEDERAL REGULATIONS
Contact 3M for more information.


311/312 Hazard Categories:
Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No Immediate Hazard - Yes Delayed Hazard - No



Section 313 Toxic Chemicals subject to the reporting requirements of that section and 40 CFR part 372 (EPCRA):

Ingredient C.A.S. No % by Wt
ALUMINUM PIGMENTS 7429-90-5 15 - 40



STATE REGULATIONS
Contact 3M for more information.




_________________________________________________________________________________________________
Page 6 of 8
3M MATERIAL SAFETY DATA SHEET Scotch-Weld (TM) 1751 B/A Epoxy Adhesive (Part B) 10/01/2004




CHEMICAL INVENTORIES
All applicable chemical ingredients in this material are listed on the European Inventory of Existing Chemical Substances (EINECS),
or are exempt polymers whose monomers are listed on EINECS.

The components of this product are in compliance with the chemical notification requirements of TSCA.

Contact 3M for more information.




INTERNATIONAL REGULATIONS
Contact 3M for more information.




This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.


SECTION 16: OTHER INFORMATION
NFPA Hazard Classification
Health: 2 Flammability: 0 Reactivity: 0 Special Hazards: None

National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are
presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the
inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to
be generated in significant quantities.


Revision Changes:
Section 16: NFPA hazard classification heading was modified.
Section 3: Other potential health effects heading was modified.
Copyright was modified.
Section 8: Exposure guidelines data source legend was modified.
Section 5: Fire fighting procedures information was modified.
Section 7: Handling information was modified.
Section 7: Storage information was modified.
Section 15: 311/312 hazard categories heading was modified.
Section 15: International regulations information was modified.
Section 15: State regulations information was modified.
Section 15: US federal regulations information was modified.
Section 10: Hazardous polymerization heading was modified.
Section 2: Ingredient table was modified.
Section 3: Other health effects information was modified.
Section 16: NFPA explanation was modified.
Section 15: Inventories information was modified.
Section 15: EPCRA 313 text was modified.
Section 12: Ecotoxicological information heading was modified.
Section 12: Chemical fate information heading was modified.

_________________________________________________________________________________________________
Page 7 of 8
3M MATERIAL SAFETY DATA SHEET Scotch-Weld (TM) 1751 B/A Epoxy Adhesive (Part B) 10/01/2004



Section 8: Exposure guidelines ingredient information was modified.
Section 8: Exposure guidelines legend was modified.
Section 16: NFPA hazard classification for special hazards was modified.
Section 12: Ecotoxicological phrase was modified.
Section 12: Chemical Fate phrase was modified.
Section 2: Ingredient phrase was added.


DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. 3M
MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF
TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of
use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely
within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a
particular purpose and suitable for user's method of use or application.

3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may
have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy.
In addition, information obtained from a database may not be as current as the information in the MSDS available directly from 3M.


3M MSDSs are available at www.3M.com




_________________________________________________________________________________________________
Page 8 of 8
3M MATERIAL SAFETY DATA SHEET Scotch-Weld (TM) 1751 B/A Epoxy Adhesive (Part A) 12/02/2003




Material Safety Data Sheet
Copyright, 2003, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly
utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is
obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit
thereon.




SECTION 1: PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: Scotch-Weld (TM) 1751 B/A Epoxy Adhesive (Part A)
MANUFACTURER: 3M
DIVISION: Industrial Adhesives and Tapes

ADDRESS: 3M Center
St. Paul, MN 55144-1000

EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)

Issue Date: 12/02/2003
Supercedes Date: 11/29/2001

Document Group: 10-3135-0

Product Use:
Specific Use: Accelerator for two-part epoxy adhesive


SECTION 2: INGREDIENTS
Ingredient C.A.S. No. % by Wt
POLYAMIDE RESIN 68410-23-1 80 - 90
CLAY 68953-58-2 5 - 10
AMORPHOUS SILICA 7631-86-9 1- 5




SECTION 3: HAZARDS IDENTIFICATION
3.1 EMERGENCY OVERVIEW


Odor, Color, Grade: amber, amine odor
General Physical Form: Liquid
Immediate health, physical, and environmental hazards: May cause severe eye irritation. May cause severe skin irritation.
May cause allergic skin reaction.




Page 1 of 7
3M MATERIAL SAFETY DATA SHEET Scotch-Weld (TM) 1751 B/A Epoxy Adhesive (Part A) 12/02/2003


3.2 POTENTIAL HEALTH EFFECTS
Eye Contact:
Severe Eye Irritation: Signs/symptoms may include significant redness, swelling, pain, tearing, cloudy appearance of the cornea, and
impaired vision.

Vapors from heated material may cause eye irritation. Signs/symptoms may include redness, swelling, pain, tearing, and blurred or
hazy vision.

Dust created by cutting, grinding, sanding, or machining may cause eye irritation. Signs/symptoms may include redness, swelling,
pain, tearing, and blurred or hazy vision.




Skin Contact:
Severe Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, dryness, cracking, blistering, and pain.


Prolonged or repeated exposure may cause:
Allergic Skin Reaction (non-photo induced): Signs/symptoms may include redness, swelling, blistering, and itching.




Inhalation:
Vapors from heated material may cause irritation of the respiratory system. Signs/symptoms may include cough, sneezing, nasal
discharge, headache, hoarseness, and nose and throat pain.

Dust from cutting, grinding, sanding or machining may cause irritation of the respiratory system. Signs/symptoms may include cough,
sneezing, nasal discharge, headache, hoarseness, and nose and throat pain.




Ingestion:
Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, nausea, diarrhea and vomiting.




SECTION 4: FIRST AID MEASURES
4.1 FIRST AID PROCEDURES

The following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices are
followed.

Eye Contact: Immediately flush eyes with large amounts of water for at least 15 minutes. Get immediate medical attention.

Skin Contact: Remove contaminated clothing and shoes. Immediately flush skin with large amounts of water. Get medical
attention. Wash contaminated clothing and clean shoes before reuse.

Page 2 of 7
3M MATERIAL SAFETY DATA SHEET Scotch-Weld (TM) 1751 B/A Epoxy Adhesive (Part A) 12/02/2003



Inhalation: If signs/symptoms develop, remove person to fresh air. If signs/symptoms persist, get medical attention.

If Swallowed: Do not induce vomiting. Give victim two glasses of water. Never give anything by mouth to an unconscious person.
Get immediate medical attention.


SECTION 5: FIRE FIGHTING MEASURES
5.1 FLAMMABLE PROPERTIES
No Data Available
Autoignition temperature
Not Applicable
Flash Point
Not Applicable
Flammable Limits - LEL
Not Applicable
Flammable Limits - UEL



5.2 EXTINGUISHING MEDIA
Ordinary combustible material. Use fire extinguishers with class A extinguishing agents (e.g., water, foam).


5.3 PROTECTION OF FIRE FIGHTERS

Special Fire Fighting Procedures: Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatus
(SCBA).

Unusual Fire and Explosion Hazards: Not applicable.

Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and thermal decomposition
information.




SECTION 6: ACCIDENTAL RELEASE MEASURES
Accidental Release Measures: Observe precautions from other sections. Call 3M- HELPS line (1-800-364-3577) for more
information on handling and managing the spill. Contain spill. For larger spills, cover drains and build dikes to prevent entry into
sewer systems or bodies of water. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or
commercially available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Collect as much of the spilled
material as possible. Place in a closed container approved for transportation by appropriate authorities.

In the event of a release of this material, the user should determine if the release qualifies as reportable according to
local, state, and federal regulations.


SECTION 7: HANDLING AND STORAGE
7.1 HANDLING
Avoid breathing of dust created by cutting, sanding, grinding or machining. Do not eat, drink or smoke when using this product.
Wash exposed areas thoroughly with soap and water.

7.2 STORAGE
Store away from heat.



Page 3 of 7
3M MATERIAL SAFETY DATA SHEET Scotch-Weld (TM) 1751 B/A Epoxy Adhesive (Part A) 12/02/2003




SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1 ENGINEERING CONTROLS
Provide ventilated enclosure for heat curing. Provide appropriate local exhaust for cutting, grinding, sanding or machining. Curing
enclosures must be exhausted to outdoors or to a suitable emission control device.

8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE)

8.2.1 Eye/Face Protection

The following eye protection(s) are recommended: Safety Glasses with side shields, Indirect Vented Goggles.

8.2.2 Skin Protection
Avoid skin contact.

Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with
your glove and/or protective clothing manufacturer for selection of appropriate compatible materials.
Gloves made from the following material(s) are recommended: Polyethylene/Ethylene Vinyl Alcohol.

8.2.3 Respiratory Protection
Avoid breathing of dust created by cutting, sanding, grinding or machining.
Select one of the following NIOSH approved respirators based on airborne concentration of contaminants and in accordance with
OSHA regulations: Half facepiece or fullface air-purifying respirator with P100 particulate filters, Half facepiece or fullface air-
purifying respirator with P95 particulate filters, Half facepiece or fullface air-purifying respirator with N95 particulate filters. Consult
the current 3M Respiratory Selection Guide for additional information or call 1-800-243-4630 for 3M technical assistance.

8.2.4 Prevention of Swallowing
Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water.


8.3 EXPOSURE GUIDELINES
Ingredient Authority Type Limit Additional Information
AMORPHOUS SILICA CMRG TWA - 3 mg/m3 as respirable dust
specific form




SOURCE OF EXPOSURE LIMIT DATA:
ACGIH: American Conference of Governmental Industrial Hygienists
CMRG: Chemical Manufacturer Recommended Guideline
OSHA: Occupational Safety and Health Administration
AIHA: American Industrial Hygiene Association Workplace Environmental Exposure Level (WEEL)




SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES

amber, amine odor
Odor, Color, Grade:
Liquid
General Physical Form:
No Data Available
Autoignition temperature
Not Applicable
Flash Point
Not Applicable
Flammable Limits - LEL


Page 4 of 7
3M MATERIAL SAFETY DATA SHEET Scotch-Weld (TM) 1751 B/A Epoxy Adhesive (Part A) 12/02/2003


Not Applicable
Flammable Limits - UEL
Not Applicable
Boiling point
0.95 g/cm3
Density
Not Applicable
Vapor Density

Not Applicable
Vapor Pressure

0.950 [Ref Std: WATER=1]
Specific Gravity
No Data Available
pH
No Data Available
Melting point
No Data Available
Solubility In Water
Nil
Solubility in Water
Not Applicable
Evaporation rate
0 g/l [Details: CONDITIONS: SCAQMD Rule 443.1 Calculation]
Volatile Organic Compounds
0.00 % weight
Percent volatile
0 g/l [Details: CONDITIONS: SCAQMD Rule 443.1 Calculation]
VOC Less H2O & Exempt Solvents
100000.0 - 600000.0 centipoise
Viscosity


SECTION 10: STABILITY AND REACTIVITY
Stability: Stable.

Materials and Conditions to Avoid: Heat is generated during cure. Do not cure a mass larger than 50 grams in a confined space to
prevent a premature reaction (exothem) with production of intense heat and smoke.


Hazardous Polymerization: Hazardous polymerization will not occur.


Hazardous Decomposition or By-Products
Substance Condition
Amine Compounds During Combustion
Carbon monoxide During Combustion
Carbon dioxide During Combustion
Oxides of Nitrogen During Combustion




SECTION 11: TOXICOLOGICAL INFORMATION




Please contact the address listed on the first page of the MSDS for Toxicological Information on this material and/or its
components.



SECTION 12: ECOLOGICAL INFORMATION
ECOTOXICOLOGICAL INFORMATION



Page 5 of 7
3M MATERIAL SAFETY DATA SHEET Scotch-Weld (TM) 1751 B/A Epoxy Adhesive (Part A) 12/02/2003



Not determined.

CHEMICAL FATE INFORMATION

Not determined.

SECTION 13: DISPOSAL CONSIDERATIONS
Waste Disposal Method: Dispose of completely cured (or polymerized) wastes in a sanitary landfill.
As a disposal alternative, incinerate uncured product in an industrial or commercial incinerator in the presence of a combustible
material.




Since regulations vary, consult applicable regulations or authorities before disposal.


SECTION 14:TRANSPORT INFORMATION
ID Number(s):
62-1752-8530-3, 62-1752-9530-2


Please contact the emergency numbers listed on the first page of the MSDS for Transportation Information for this
material.


SECTION 15: REGULATORY INFORMATION
US FEDERAL REGULATIONS

Contact 3M for more information.


311/312 Hazard Categories:
Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No Immediate Hazard - Yes Delayed Hazard - No



STATE REGULATIONS

Contact 3M for more information.




CHEMICAL INVENTORIES
All applicable chemical ingredients in this material are listed on the European Inventory of Existing Chemical Substances (EINECS),
or are exempt polymers whose monomers are listed on EINECS.


Page 6 of 7
3M MATERIAL SAFETY DATA SHEET Scotch-Weld (TM) 1751 B/A Epoxy Adhesive (Part A) 12/02/2003



The components of this product are in compliance with the chemical notification requirements of TSCA.

Contact 3M for more information.




INTERNATIONAL REGULATIONS
Contact 3M for more information.




This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.



SECTION 16: OTHER INFORMATION
NFPA Hazard Classification
Health: 2 Flammability: 1 Reactivity: 1 Special Hazards: None

National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are
presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the
inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to
be generated in significant quantities.



No revision information is available.


DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. 3M
MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF
TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of
use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely
within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a
particular purpose and suitable for user's method of use or application.

3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may
have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy.
In addition, information obtained from a database may not be as current as the information in the MSDS available directly from 3M.


3M MSDSs are available at www.3M.com




Page 7 of 7

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
bayercropscience_com_tr---oberonsc240.asp 283594-90-1
bayercropscience_com_tr---oscar100ec.asp 116714-46-6 872-50-4
bayercropscience_com_tr---pomarsol.asp 005-00-4 137-26-8 37-43-6
bayercropscience_com_tr---previcur.asp N/A
bayercropscience_com_tr---previcur_energy.asp 2173-38-3 2173-38-7 2133-51-4 24579-73-5 15845-66-6
bayercropscience_com_tr---pybuthrin_3-15.asp 8003-34-7 51-03-6 27306-78-1
bayercropscience_com_tr---qb.asp 138261-41-3
bayercropscience_com_tr---qb_spray.asp 138261-41-3
bayercropscience_com_tr---qb_wg10.asp 138261-41-3
bayercropscience_com_tr---racumin_paste.asp 5836-29-3
bayercropscience_com_tr---racumin_rb.asp 5836-29-3
bayercropscience_com_tr---ralon.asp 71283-80-2 135590-91-9 9043-30-5 55965-84-9
bayercropscience_com_tr---raxil.asp 107534-96-3 119432-41-6
bayercropscience_com_tr---raxil2.asp 107534-96-3
bayercropscience_com_tr---reslin_super.asp 28434-00-6 52645-53-1 51-03-6 68412-54-4 68584-23-6
bayercropscience_com_tr---responsar_sc_025.asp 68359-37-5
bayercropscience_com_tr---ricestar.asp 872-50-4 9043-30-5 78-83-1
bayercropscience_com_tr---rodilon_mum_blok.asp 104653-34-1
bayercropscience_com_tr---rodilon_paste.asp 104653-34-1
bayercropscience_com_tr---ronstar_ec25.asp 1966-30-9 68953-96-8 78-83-1 108-94-1
bayercropscience_com_tr---rovral.asp 36734-19-7
bayercropscience_com_tr---rovral_50_wp.asp 36734-19-7
bayercropscience_com_tr---sekator_od375.asp 135590-91-9 144550-36-7 120923-37-7 577-11-7
bayercropscience_com_tr---sencor.asp 034-00-8 21087-64-9 91078-64-7 22-41-5
bayercropscience_com_tr---solfac_ec.asp 68359-37-5 1330-20-7 37205-87-1 26264-06-2
bayercropscience_com_tr---solfac_ec_050.asp 68359-37-5 1330-20-7 37205-87-1 26264-06-2
bayercropscience_com_tr---solfac_ew_050.asp 68359-37-5
bayercropscience_com_tr---sporgon.asp 2133-51-4 75747-77-2 68425-94-5
bayercropscience_com_tr---sporgonwp50.asp 75747-77-2 68425-94-5
bayercropscience_com_tr---sportakec450.asp 67747-09-5 78-83-1 872-50-4
bayercropscience_com_tr---starycide_sc_480.asp 64628-44-0 137-20-2
bayercropscience_com_tr---sunrice.asp 126801-58-9 1310-73-2 151-21-3
bayercropscience_com_tr---teldor.asp 126833-17-8
bayercropscience_com_tr---thiodan.asp 115-29-7 11117-11-6
bayercropscience_com_tr---thiodan2.asp 115-29-7 11117-11-6 78-83-1
bgc_com_au---msds.asp 10101-41-4 9004-34-6 8002-74-2
bgc_com_au---msds_portland_cement.asp 65997-15-1 10101-41-4 1317-65-3 65999-69-2 1305-62-0
bindingsource_com---1099_msds.asp 67-64-1 9003-18-3 25085-50-1 55185-45-0 69-72-7 1314-13-2
bindingsource_com---1300_msds.asp 68611-24-5 78-93-3 9010-98-4 110-54-3 108-88-3 64741-84-0 110-82-7
bindingsource_com---1751_msds.asp N/A
bindingsource_com---1838-l_msds.asp N/A
bindingsource_com---1838_green_msds.asp N/A
bindingsource_com---1838_tan_msds.asp N/A
bindingsource_com---2141_msds.asp 108-88-3 67-64-1 64742-88-7 68611-24-5 9010-98-4 110-54-3 8050-26-8
bindingsource_com---2158_msds.asp N/A
bindingsource_com---2214_regular_msds.asp 25068-38-6 7429-90-5 41638-13-5 67762-90-7 461-58-5 150-68-5 14228-73-0
bindingsource_com---2262_msds.asp 67-64-1 109-99-9 8050-31-5 9010-81-5
bindingsource_com---3110msds.asp 9002-88-4
bindingsource_com---3501_msds.asp N/A
bindingsource_com---3750msds.asp 24937-78-8

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC