3M MATERIAL SAFETY DATA SHEET SCOTCH-WELD (TM) 1838-L B/A TRANSLUCENT EPOXY ADHESIVE 11/26/2003
Material Safety Data Sheet
Copyright, 2003, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly
utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is
obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit
thereon.
PRODUCT NAME: SCOTCH-WELD (TM) 1838-L B/A TRANSLUCENT EPOXY ADHESIVE
MANUFACTURER: 3M
DIVISION: Industrial Adhesives and Tapes
ADDRESS: 3M Center
St. Paul, MN 55144-1000
EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)
Issue Date: 11/26/2003
Supercedes Date: 05/24/2001
Document Group: 10-3152-5
ID Number(s):
62-3520-0530-0, 62-3520-0532-6, 62-3520-0535-9, 62-3520-6435-6
This product is a kit or a multipart product which consists of multiple, independently packaged components. An MSDS for
each of these components is included. Please do not separate the component MSDSs from this cover page. The document
numbers of the MSDSs for components of this product are:
10-3150-9, 10-3151-7
No revision information is available.
DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. 3M
MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF
TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of
use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely
within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a
particular purpose and suitable for user's method of use or application.
3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may
have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy.
In addition, information obtained from a database may not be as current as the information in the MSDS available directly from 3M.
Page 1 of 1
3M MATERIAL SAFETY DATA SHEET SCOTCH-WELD (TM) 1838-L B/A Part A Translucent Epoxy Adhesive 11/26/2003
Material Safety Data Sheet
Copyright, 2003, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly
utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is
obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit
thereon.
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: SCOTCH-WELD (TM) 1838-L B/A Part A Translucent Epoxy Adhesive
MANUFACTURER: 3M
DIVISION: Industrial Adhesives and Tapes
ADDRESS: 3M Center
St. Paul, MN 55144-1000
EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)
Issue Date: 11/26/2003
Supercedes Date: 05/24/2001
Document Group: 10-3150-9
Product Use:
Specific Use: accelerator for 2 part epoxy adhesive
SECTION 2: INGREDIENTS
Ingredient C.A.S. No. % by Wt
ALIPHATIC POLYAMINE 68911-25-1 50 - 70
POLYAMIDE RESIN 68410-23-1 25 - 35
BIS(3-AMINOPROPYL) ETHER OF DIETHYLENE GLYCOL 4246-51-9 <2
SECTION 3: HAZARDS IDENTIFICATION
3.1 EMERGENCY OVERVIEW
Odor, Color, Grade: clear, amine odor.
General Physical Form: Liquid
Immediate health, physical, and environmental hazards: May cause chemical eye burns. May cause severe skin irritation.
May cause allergic skin reaction.
Page 1 of 7
3M MATERIAL SAFETY DATA SHEET SCOTCH-WELD (TM) 1838-L B/A Part A Translucent Epoxy Adhesive 11/26/2003
3.2 POTENTIAL HEALTH EFFECTS
Eye Contact:
Corrosive (Eye Burns): Signs/symptoms may include cloudy appearance of the cornea, chemical burns, severe pain, tearing,
ulcerations, significantly impaired vision or complete loss of vision.
Vapors from heated material may cause eye irritation. Signs/symptoms may include redness, swelling, pain, tearing, and blurred or
hazy vision.
Dust created by cutting, grinding, sanding, or machining may cause eye irritation. Signs/symptoms may include redness, swelling,
pain, tearing, and blurred or hazy vision.
Skin Contact:
Severe Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, dryness, cracking, blistering, and pain.
Prolonged or repeated exposure may cause:
Allergic Skin Reaction (non-photo induced): Signs/symptoms may include redness, swelling, blistering, and itching.
Inhalation:
Vapors from heated material may cause irritation of the respiratory system. Signs/symptoms may include cough, sneezing, nasal
discharge, headache, hoarseness, and nose and throat pain.
Dust from cutting, grinding, sanding or machining may cause irritation of the respiratory system. Signs/symptoms may include cough,
sneezing, nasal discharge, headache, hoarseness, and nose and throat pain.
Ingestion:
Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, nausea, diarrhea and vomiting.
SECTION 4: FIRST AID MEASURES
4.1 FIRST AID PROCEDURES
The following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices are
followed.
Eye Contact: Immediately flush eyes with large amounts of water for at least 15 minutes. Get immediate medical attention.
Skin Contact: Remove contaminated clothing and shoes. Immediately flush skin with large amounts of water. Get medical
attention. Wash contaminated clothing and clean shoes before reuse.
Page 2 of 7
3M MATERIAL SAFETY DATA SHEET SCOTCH-WELD (TM) 1838-L B/A Part A Translucent Epoxy Adhesive 11/26/2003
Inhalation: If signs/symptoms develop, remove person to fresh air. If signs/symptoms persist, get medical attention.
If Swallowed: Do not induce vomiting. Give victim two glasses of water. Never give anything by mouth to an unconscious person.
Get immediate medical attention.
SECTION 5: FIRE FIGHTING MEASURES
5.1 FLAMMABLE PROPERTIES
No Data Available
Autoignition temperature
Not Applicable
Flash Point
Not Applicable
Flammable Limits - LEL
Not Applicable
Flammable Limits - UEL
5.2 EXTINGUISHING MEDIA
Material will not burn.
5.3 PROTECTION OF FIRE FIGHTERS
Special Fire Fighting Procedures: Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatus
(SCBA).
Unusual Fire and Explosion Hazards: Not applicable.
Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and thermal decomposition
information.
SECTION 6: ACCIDENTAL RELEASE MEASURES
Accidental Release Measures: Evacuate unprotected and untrained personnel from hazard area. The spill should be cleaned up by
qualified personnel. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to
disperse or exhaust vapors, in accordance with good industrial hygiene practice. Warning! A motor could be an ignition source and
could cause flammable gases or vapors in the spill area to burn or explode. Contain spill. For larger spills, cover drains and build
dikes to prevent entry into sewer systems or bodies of water. Working from around the edges of the spill inward, cover with
bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it appears dry.
Collect as much of the spilled material as possible. Place in a closed container approved for transportation by appropriate authorities.
In the event of a release of this material, the user should determine if the release qualifies as reportable according to
local, state, and federal regulations.
SECTION 7: HANDLING AND STORAGE
7.1 HANDLING
Avoid breathing of dust created by cutting, sanding, grinding or machining. Do not eat, drink or smoke when using this product.
Wash exposed areas thoroughly with soap and water. Contents may be under pressure, open carefully. For industrial or professional
use only.
Page 3 of 7
3M MATERIAL SAFETY DATA SHEET SCOTCH-WELD (TM) 1838-L B/A Part A Translucent Epoxy Adhesive 11/26/2003
7.2 STORAGE
Store away from heat.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1 ENGINEERING CONTROLS
Not applicable. Provide appropriate local exhaust for cutting, grinding, sanding or machining.
8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE)
8.2.1 Eye/Face Protection
The following eye protection(s) are recommended: Safety Glasses with side shields, Indirect Vented Goggles.
8.2.2 Skin Protection
Avoid skin contact.
Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with
your glove and/or protective clothing manufacturer for selection of appropriate compatible materials.
Gloves made from the following material(s) are recommended: Polyethylene/Ethylene Vinyl Alcohol.
8.2.3 Respiratory Protection
Avoid breathing of dust created by cutting, sanding, grinding or machining.
Select one of the following NIOSH approved respirators based on airborne concentration of contaminants and in accordance with
OSHA regulations: Half facepiece or fullface air-purifying respirator with P100 particulate filters, Half facepiece or fullface air-
purifying respirator with P95 particulate filters, Half facepiece or fullface air-purifying respirator with N95 particulate filters. Consult
the current 3M Respiratory Selection Guide for additional information or call 1-800-243-4630 for 3M technical assistance.
8.2.4 Prevention of Swallowing
Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water.
8.3 EXPOSURE GUIDELINES
None Established
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
clear, amine odor.
Odor, Color, Grade:
Liquid
General Physical Form:
No Data Available
Autoignition temperature
Not Applicable
Flash Point
Not Applicable
Flammable Limits - LEL
Not Applicable
Flammable Limits - UEL
>=95 潞F [Details: MITS data]Not Applicable
Boiling point
1 g/ml
Density
Not Applicable
Vapor Density
<=27 psia [@ 131.0000000000 潞F] [Details: MITS data]Not
Vapor Pressure
Applicable
1 [Ref Std: WATER=1]
Specific Gravity
Page 4 of 7
3M MATERIAL SAFETY DATA SHEET SCOTCH-WELD (TM) 1838-L B/A Part A Translucent Epoxy Adhesive 11/26/2003
No Data Available
pH
Not Applicable
Melting point
Nil
Solubility in Water
Not Applicable
Evaporation rate
Not Applicable
Volatile Organic Compounds
0.00 % weight
Percent volatile
Not Applicable
VOC Less H2O & Exempt Solvents
Approximately 9500 centistoke
Viscosity
SECTION 10: STABILITY AND REACTIVITY
Stability: Stable.
Materials and Conditions to Avoid: Heat is generated during cure. Do not cure a mass larger than 50 grams in a confined space to
prevent a premature reaction (exothem) with production of intense heat and smoke.
Hazardous Polymerization: Hazardous polymerization will not occur.
Hazardous Decomposition or By-Products
Substance Condition
Amine Compounds During Combustion
Carbon monoxide During Combustion
Carbon dioxide During Combustion
Oxides of Nitrogen During Combustion
SECTION 11: TOXICOLOGICAL INFORMATION
Please contact the address listed on the first page of the MSDS for Toxicological Information on this material and/or its
components.
SECTION 12: ECOLOGICAL INFORMATION
ECOTOXICOLOGICAL INFORMATION
Not determined.
CHEMICAL FATE INFORMATION
Not determined.
Page 5 of 7
3M MATERIAL SAFETY DATA SHEET SCOTCH-WELD (TM) 1838-L B/A Part A Translucent Epoxy Adhesive 11/26/2003
SECTION 13: DISPOSAL CONSIDERATIONS
Waste Disposal Method: Dispose of completely cured (or polymerized) wastes in a sanitary landfill.
EPA Hazardous Waste Number (RCRA): Not regulated
Since regulations vary, consult applicable regulations or authorities before disposal.
SECTION 14:TRANSPORT INFORMATION
ID Number(s):
62-3620-8530-0, 62-3620-8531-8, 62-3620-9530-9
Please contact the emergency numbers listed on the first page of the MSDS for Transportation Information for this
material.
SECTION 15: REGULATORY INFORMATION
US FEDERAL REGULATIONS
Contact 3M for more information.
311/312 Hazard Categories:
Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No Immediate Hazard - Yes Delayed Hazard - No
STATE REGULATIONS
Contact 3M for more information.
CHEMICAL INVENTORIES
All applicable chemical ingredients in this material are listed on the European Inventory of Existing Chemical Substances (EINECS),
or are exempt polymers whose monomers are listed on EINECS.
The components of this product are in compliance with the chemical notification requirements of TSCA.
Contact 3M for more information.
Additional Information: To be used with SCOTCH-WELD 1838-L Part B Translucent Epoxy Adhesive; (Mfg. #EC-3520 --
MSDS DOC #1031517). Does not contain TSCA 12(b) reportable chemicals.
Page 6 of 7
3M MATERIAL SAFETY DATA SHEET SCOTCH-WELD (TM) 1838-L B/A Part A Translucent Epoxy Adhesive 11/26/2003
INTERNATIONAL REGULATIONS
Contact 3M for more information.
This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.
SECTION 16: OTHER INFORMATION
NFPA Hazard Classification
Health: 3 Flammability: 0 Reactivity: 1 Special Hazards: None
National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are
presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the
inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to
be generated in significant quantities.
No revision information is available.
DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. 3M
MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF
TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of
use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely
within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a
particular purpose and suitable for user's method of use or application.
3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may
have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy.
In addition, information obtained from a database may not be as current as the information in the MSDS available directly from 3M.
3M MSDSs are available at www.3M.com
Page 7 of 7
3M MATERIAL SAFETY DATA SHEET SCOTCH-WELD (TM) 1838-L B/A Part B Translucent Epoxy Adhesive 11/26/2003
Material Safety Data Sheet
Copyright, 2003, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly
utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is
obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit
thereon.
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: SCOTCH-WELD (TM) 1838-L B/A Part B Translucent Epoxy Adhesive
MANUFACTURER: 3M
DIVISION: Industrial Adhesives and Tapes
ADDRESS: 3M Center
St. Paul, MN 55144-1000
EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)
Issue Date: 11/26/2003
Supercedes Date: 05/24/2001
Document Group: 10-3151-7
Product Use:
Specific Use: base for two-part epoxy adhesive
SECTION 2: INGREDIENTS
Ingredient C.A.S. No. % by Wt
EPOXY RESIN 25068-38-6 100
SECTION 3: HAZARDS IDENTIFICATION
3.1 EMERGENCY OVERVIEW
Specific Physical Form: Viscous
Odor, Color, Grade: clear, epoxy odor.
General Physical Form: Liquid
Immediate health, physical, and environmental hazards: May cause allergic skin reaction.
3.2 POTENTIAL HEALTH EFFECTS
Eye Contact:
Page 1 of 7
3M MATERIAL SAFETY DATA SHEET SCOTCH-WELD (TM) 1838-L B/A Part B Translucent Epoxy Adhesive 11/26/2003
Moderate Eye Irritation: Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision.
Vapors from heated material may cause eye irritation. Signs/symptoms may include redness, swelling, pain, tearing, and blurred or
hazy vision.
Dust created by cutting, grinding, sanding, or machining may cause eye irritation. Signs/symptoms may include redness, swelling,
pain, tearing, and blurred or hazy vision.
Skin Contact:
Moderate Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, and dryness.
Prolonged or repeated exposure may cause:
Allergic Skin Reaction (non-photo induced): Signs/symptoms may include redness, swelling, blistering, and itching.
Inhalation:
Vapors from heated material may cause irritation of the respiratory system. Signs/symptoms may include cough, sneezing, nasal
discharge, headache, hoarseness, and nose and throat pain.
Dust from cutting, grinding, sanding or machining may cause irritation of the respiratory system. Signs/symptoms may include cough,
sneezing, nasal discharge, headache, hoarseness, and nose and throat pain.
Ingestion:
Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, nausea, diarrhea and vomiting.
SECTION 4: FIRST AID MEASURES
4.1 FIRST AID PROCEDURES
The following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices are
followed.
Eye Contact: Flush eyes with large amounts of water. If signs/symptoms persist, get medical attention.
Skin Contact: Remove contaminated clothing and shoes. Immediately flush skin with large amounts of water. Get medical
attention. Wash contaminated clothing and clean shoes before reuse.
Inhalation: If signs/symptoms develop, remove person to fresh air. If signs/symptoms persist, get medical attention.
If Swallowed: Do not induce vomiting. Give victim two glasses of water. Never give anything by mouth to an unconscious person.
Page 2 of 7
3M MATERIAL SAFETY DATA SHEET SCOTCH-WELD (TM) 1838-L B/A Part B Translucent Epoxy Adhesive 11/26/2003
Get immediate medical attention.
SECTION 5: FIRE FIGHTING MEASURES
5.1 FLAMMABLE PROPERTIES
No Data Available
Autoignition temperature
>=248 潞C [Test Method: Closed Cup]
Flash Point
Not Applicable
Flammable Limits - LEL
Not Applicable
Flammable Limits - UEL
5.2 EXTINGUISHING MEDIA
Ordinary combustible material. Use fire extinguishers with class A extinguishing agents (e.g., water, foam).
5.3 PROTECTION OF FIRE FIGHTERS
Special Fire Fighting Procedures: Water may be used to blanket the fire. Wear full protective equipment (Bunker Gear) and a
self-contained breathing apparatus (SCBA).
Unusual Fire and Explosion Hazards: Not applicable.
Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and thermal decomposition
information.
SECTION 6: ACCIDENTAL RELEASE MEASURES
Accidental Release Measures: Evacuate unprotected and untrained personnel from hazard area. The spill should be cleaned up by
qualified personnel. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in
accordance with good industrial hygiene practice. Warning! A motor could be an ignition source and could cause flammable gases or
vapors in the spill area to burn or explode. Contain spill. For larger spills, cover drains and build dikes to prevent entry into sewer
systems or bodies of water. Collect as much of the spilled material as possible. Place in a closed container approved for
transportation by appropriate authorities.
In the event of a release of this material, the user should determine if the release qualifies as reportable according to
local, state, and federal regulations.
SECTION 7: HANDLING AND STORAGE
7.1 HANDLING
Avoid breathing of dust created by cutting, sanding, grinding or machining. Do not eat, drink or smoke when using this product.
Wash exposed areas thoroughly with soap and water. For industrial or professional use only. Avoid contact with oxidizing agents.
7.2 STORAGE
Store away from acids. Store away from oxidizing agents.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
Page 3 of 7
3M MATERIAL SAFETY DATA SHEET SCOTCH-WELD (TM) 1838-L B/A Part B Translucent Epoxy Adhesive 11/26/2003
8.1 ENGINEERING CONTROLS
Not applicable. Provide appropriate local exhaust for cutting, grinding, sanding or machining.
8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE)
8.2.1 Eye/Face Protection
The following eye protection(s) are recommended: Safety Glasses with side shields, Indirect Vented Goggles.
8.2.2 Skin Protection
Avoid skin contact.
Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with
your glove and/or protective clothing manufacturer for selection of appropriate compatible materials.
Gloves made from the following material(s) are recommended: Polyethylene/Ethylene Vinyl Alcohol.
8.2.3 Respiratory Protection
Avoid breathing of dust created by cutting, sanding, grinding or machining.
Select one of the following NIOSH approved respirators based on airborne concentration of contaminants and in accordance with
OSHA regulations: Half facepiece or fullface air-purifying respirator with P100 particulate filters, Half facepiece or fullface air-
purifying respirator with P95 particulate filters, Half facepiece or fullface air-purifying respirator with N95 particulate filters. Consult
the current 3M Respiratory Selection Guide for additional information or call 1-800-243-4630 for 3M technical assistance.
8.2.4 Prevention of Swallowing
Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water.
8.3 EXPOSURE GUIDELINES
None Established
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Viscous
Specific Physical Form:
clear, epoxy odor.
Odor, Color, Grade:
Liquid
General Physical Form:
No Data Available
Autoignition temperature
>=248 潞C [Test Method: Closed Cup]
Flash Point
Not Applicable
Flammable Limits - LEL
Not Applicable
Flammable Limits - UEL
Not Applicable
Boiling point
1.14 g/ml
Density
Not Applicable
Vapor Density
<=0.01 mmHg [@ 20 潞C]
Vapor Pressure
1.14 [Ref Std: WATER=1]
Specific Gravity
Not Applicable
pH
No Data Available
Melting point
Nil
Solubility in Water
Not Applicable
Evaporation rate
Not Applicable
Volatile Organic Compounds
0.00 % weight
Percent volatile
Page 4 of 7
3M MATERIAL SAFETY DATA SHEET SCOTCH-WELD (TM) 1838-L B/A Part B Translucent Epoxy Adhesive 11/26/2003
Not Applicable
VOC Less H2O & Exempt Solvents
Approximately 9610 centistoke
Viscosity
SECTION 10: STABILITY AND REACTIVITY
Stability: Stable.
Materials and Conditions to Avoid: Strong acids; Strong oxidizing agents; Heat is generated during cure. Do not cure a mass larger
than 50 grams in a confined space to prevent a premature reaction (exothem) with production of intense heat and smoke.
Hazardous Polymerization: Hazardous polymerization will not occur.
Hazardous Decomposition or By-Products
Substance Condition
Aldehydes During Combustion
Hydrocarbons During Combustion
Carbon monoxide During Combustion
Carbon dioxide During Combustion
Ketones During Combustion
SECTION 11: TOXICOLOGICAL INFORMATION
Please contact the address listed on the first page of the MSDS for Toxicological Information on this material and/or its
components.
SECTION 12: ECOLOGICAL INFORMATION
ECOTOXICOLOGICAL INFORMATION
Not determined.
CHEMICAL FATE INFORMATION
Not determined.
SECTION 13: DISPOSAL CONSIDERATIONS
Waste Disposal Method: Dispose of completely cured (or polymerized) wastes in a sanitary landfill.
Page 5 of 7
3M MATERIAL SAFETY DATA SHEET SCOTCH-WELD (TM) 1838-L B/A Part B Translucent Epoxy Adhesive 11/26/2003
EPA Hazardous Waste Number (RCRA): Not regulated
Since regulations vary, consult applicable regulations or authorities before disposal.
SECTION 14:TRANSPORT INFORMATION
ID Number(s):
62-3520-8531-0, 62-3520-9530-1
Please contact the emergency numbers listed on the first page of the MSDS for Transportation Information for this
material.
SECTION 15: REGULATORY INFORMATION
US FEDERAL REGULATIONS
Contact 3M for more information.
311/312 Hazard Categories:
Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No Immediate Hazard - Yes Delayed Hazard - No
STATE REGULATIONS
Contact 3M for more information.
CHEMICAL INVENTORIES
All applicable chemical ingredients in this material are listed on the European Inventory of Existing Chemical Substances (EINECS),
or are exempt polymers whose monomers are listed on EINECS.
The components of this product are in compliance with the chemical notification requirements of TSCA.
Contact 3M for more information.
Additional Information: To be used with SCOTCH-WELD 1838-L Part A Translucent Epoxy Adhesive; Manufacturing No. EC-
3620. Does not TSCA 12(b) reportable chemicals.
INTERNATIONAL REGULATIONS
Contact 3M for more information.
Page 6 of 7
3M MATERIAL SAFETY DATA SHEET SCOTCH-WELD (TM) 1838-L B/A Part B Translucent Epoxy Adhesive 11/26/2003
This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.
SECTION 16: OTHER INFORMATION
NFPA Hazard Classification
Health: 2 Flammability: 1 Reactivity: 0 Special Hazards: None
National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are
presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the
inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to
be generated in significant quantities.
No revision information is available.
DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. 3M
MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF
TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of
use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely
within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a
particular purpose and suitable for user's method of use or application.
3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may
have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy.
In addition, information obtained from a database may not be as current as the information in the MSDS available directly from 3M.
3M MSDSs are available at www.3M.com
Page 7 of 7
|