Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

64742-82-1

File Name: resapol_com---aquaseal_protective_black_bitumen_paint_msds.asp
                                                 SAFETY DATA SHEET
AQUASEAL PROTECTIVE BLACK BITUMEN PAINT


1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY

AQUASEAL PROTECTIVE BLACK BITUMEN PAINT
PRODUCT NAME:

F000000
PART No.:

Aquaseal 44 Bitumen Paint
SYNONYMS, TRADE NAMES:

MBT Feb
SUPPLIER:
Albany House
Swinton Hall Road
Swinton Manchester M27 4DT
(+44) 161 794 7411
TEL:
(+44) 161 727 8547
FAX:



2 COMPOSITION/INFORMATION ON INGREDIENTS

INGREDIENT NAME EINECS CAS No. CONTENTS SYMBOL RISK
No. (R No.)
WHITE SPIRIT 64742-82-1 60-100 % Xn, N 10, 51/53, 65
BITUMEN CUTBACK hdrocarbon solvent 10-30 % Xn 10, 51/53, 65

The full text for all R-phrases are shown in section 16.

One component product based on solution of bitumen in organic hydrocarbon solvent
COMPOSITION COMMENTS:


3 HAZARDS IDENTIFICATION

Flammable.
Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.


4 FIRST AID MEASURES

Move the exposed person to fresh air at once. Provide fresh air, warmth and rest, preferably in
INHALATION:
a comfortable upright sitting position. Get medical attention if any discomfort continues.
DO NOT INDUCE VOMITING! NEVER MAKE AN UNCONSCIOUS PERSON VOMIT OR
INGESTION:
DRINK FLUIDS! Rinse mouth thoroughly. Promptly get affected personnel to drink large
volumes of water to dilute the swallowed chemical. Obtain medical advice Provide rest,
warmth and fresh air.
Remove contaminated clothing. Wash the skin immediately with soap and water. Get medical
SKIN:
attention promptly if symptoms occur after washing.
Make sure to remove any contact lenses from the eyes before rinsing. Promptly wash eyes
EYES:
with plenty of water while lifting the eye lids. Continue to rinse for at least 15 minutes and get
medical attention.


5 FIRE FIGHTING MEASURES

Fire can be extinguished using: Foam. Carbon dioxide (CO2). Dry chemicals, sand, dolomite
EXTINGUISHING MEDIA:
etc.


Page 1 / 4 >>>
AQUASEAL PROTECTIVE BLACK BITUMEN PAINT
SPECIAL FIRE FIGHTING PROCEDURES:
Cool containers exposed to flames with water until well after the fire is out.



6 ACCIDENTAL RELEASE MEASURES

PRECAUTIONS TO PROTECT ENVIRONMENT:
Avoid subsoil penetration. Prevent product from entering drains. Do not contaminate surface
water.
Wear necessary protective equipment. Extinguish all ignition sources. Avoid sparks, flames,
SPILL CLEANUP METHODS:
heat and smoking. Ventilate. Do not contaminate water sources or sewer. Absorb in
vermiculite, dry sand or earth and place into containers. Avoid breathing vapour


7 HANDLING AND STORAGE

Keep away from heat, sparks and open flame. Avoid spilling, skin and eye contact.
USAGE PRECAUTIONS:
Keep in cool, dry, ventilated storage and closed containers.
STORAGE PRECAUTIONS:


8 EXPOSURE CONTROLS AND PERSONAL PROTECTION

INGREDIENT NAME CAS No STD LT EXP ST EXP
(8 hrs) (15 min)
WHITE SPIRIT 64742-82-1 100 ppm 125 ppm


PROTECTIVE EQUIPMENT:




Use protective gloves. or gauntlets if risk of skin contact
PROTECTIVE GLOVES:
Wear appropriate clothing to prevent any possibility of liquid contact and repeated or prolonged
OTHER PROTECTION:
vapour contact.

Wash at the end of each work shift and before eating, smoking and using the toilet. Wash
HYGIENIC WORK ROUTINES:
promptly with soap & water if skin becomes contaminated. Promptly remove any clothing that
becomes contaminated. Use appropriate skin cream to prevent drying of skin. No eating or
drinking while working with this material. DO NOT SMOKE IN WORK AREA!


9 PHYSICAL AND CHEMICAL PROPERTIES

Liquid. Black.
APPEARANCE: COLOUR:
Organic Solvent
ODOUR/TASTE:
Immiscible with water.
SOLUBILITY DESCRIPTION:
MORE THAN - 7 cSt @ 40 掳C 38掳C
VISCOSITY: FLASH POINT (掳C):
CC (Closed cup).
FLASH POINT METHOD:


10 STABILITY AND REACTIVITY

Normally stable.
STABILITY:
Avoid heat. Avoid contact with acids and oxidising substances.
CONDITIONS TO AVOID:
HAZARDOUS DECOMPOSITION PRODUCTS:
Fire creates: Vapours/gases/fumes of: Carbon monoxide (CO). Carbon dioxide (CO2).




Page 2 / 4 >>>
AQUASEAL PROTECTIVE BLACK BITUMEN PAINT

11 TOXICOLOGICAL INFORMATION

May cause irritation to the respiratory system. and lung damage
INHALATION:
May cause discomfort if swallowed.
INGESTION:
Acts as a defatting agent on skin. May cause cracking of skin, and eczema.
SKIN:
Spray and vapour in the eyes may cause irritation and smarting.
EYES:


12 ECOLOGICAL INFORMATION

Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic
ENVIRONMENTAL HAZARDS:
environment. Can be expected to biodegrade slowly


13 DISPOSAL CONSIDERATIONS

Dispose of in accordance with Local Authority requirements.
DISPOSAL METHODS:


14 TRANSPORT INFORMATION

LABEL FOR CONVEYANCE:




ROAD:
1263
UN No:
Class 3: Flammable liquids. 3
HAZARD CLASS (ADR): ADR CLASS No:
31 (c) 30
ADR ITEM No: HAZARD No. (ADR):
2301 3
MARGINAL: ADR LABEL No:
30G80 30G36
HAZCHEM CODE: CEFIC TEC(R) No:
PAINT or PAINT RELATED MATERIAL
PROPER SHIPPING NAME I:

RAIL:
3 31 (c)
RAIL TRANSPORT CLASS No: RAILROAD PT:

SEA:
1263 Class 3
UN SEA: SEA TRANSPORT CLASS No:
3372 III
IMDG Page No: SEA PACK GR:
3-05 310 or 313
EmS No.: MFAG Table No:
No.
MARINE POLLUTANT:

AIR:
1263 3
UN AIR: AIR TRANSPORT CLASS No:
III
AIR PACK GR:




Page 3 / 4 >>>
AQUASEAL PROTECTIVE BLACK BITUMEN PAINT

15 REGULATORY INFORMATION

LABEL FOR SUPPLY:




R-10 Flammable.
RISK PHRASES:
R-51/53 Toxic to aquatic organisms, may cause long-term adverse effects in
the aquatic environment.

S-16 Keep away from sources of ignition - No Smoking.
SAFETY PHRASES:
S-2 Keep out of reach of children.
S-23B Do not breathe fumes
S-24/25 Avoid contact with skin and eyes.
S-29/56 Do not empty into drains, dispose of this material and its container to
hazardous or special waste collection point.
S-36/37 Wear suitable protective clothing and gloves.
S-46 If swallowed seek medical advice immediately and show this container
label.
S-51 Use only in well ventilated areas.
S-61 Avoid release to the environment. Refer to special instructions/ Safety
Data Sheets.

Classification and Labelling of Substances and Preparations Dangerous for Supply.
APPROVED CODE OF PRACTICE:

Occupational Exposure Limits EH40.
GUIDANCE NOTES:
Introduction to Local Exhaust Ventilation HS(G)37.
CHIP for everyone HSG(108).


16 OTHER INFORMATION

Dangerous Properties of Industrial Materials Report, N.Sax et.al.
INFORMATION SOURCES:
20/05/02
REVISION DATE:
REVISION No. /REPLACES SDS ISSUED:
Issue 2
SDS0250
SDS No.:
R-10 Flammable.
R-PHRASES (Full Text):
R-51/53 Toxic to aquatic organisms, may cause long-term adverse effects in
the aquatic environment.
R-65 Harmful: may cause lung damage if swallowed.




Page 4 / 4

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
resapol_com---aquaseal_firmafix_roof_felt_adhesive_msds.asp 64742-82-1
resapol_com---aquaseal_hyband_self_adhesive_flashing_tape_msds.asp N/A
resapol_com---aquaseal_hyprufe_damp_proof_liquid_membrane_msds.asp N/A
resapol_com---aquaseal_instant_roof_repair_mastic_msds.asp N/A
resapol_com---aquaseal_protective_black_bitumen_paint_msds.asp 64742-82-1
resapol_com---aquaseal_solvent_free_roof_waterproofer_msds.asp N/A
resapol_com---bitucrete_colpatch_msds.asp N/A
resapol_com---bitutex_msds.asp 8008-20-6
resapol_com---delvocrete_stabiliser_10_msds.asp 6419-19-8 5949-29-1
resapol_com---febclear_super_masterkure_121_msds.asp 64742-82-1 1330-20-7 95-63-6
resapol_com---febguard_epoxy_mortar_base_msds.asp 25085-99-8 28064-14-4 68081-84-5
resapol_com---febguard_epoxy_mortar_part_b_hardener_msds.asp 2855-13-2 100-51-6 25154-52-3
resapol_com---febmix_admix_msds.asp N/A
resapol_com---febond_pva_msds.asp N/A
resapol_com---febond_sbr_msds.asp N/A
resapol_com---febplate_s_base_msds.asp 25085-99-8 2461-15-6
resapol_com---febproof_plus_msds.asp 1310-73-2 1344-09-8
resapol_com---febset_nf_hardener_msds.asp 1761-71-3 1477-55-0
resapol_com---febspeed_msds.asp N/A
resapol_com---feb_fire_cement_msds.asp 1344-09-8
resapol_com---feb_unifil_msds.asp 65997-15-1
resapol_com---glenium_51_msds.asp N/A
resapol_com---glenium_ace_30_msds.asp N/A
resapol_com---glenium_stream_5_msds.asp N/A
resapol_com---leopave_msds.asp N/A
resapol_com---leoseal_msds.asp N/A
resapol_com---leotak_colbond_msds.asp N/A
resapol_com---lock_coat_msds.asp 64742-82-1 822-06-0
resapol_com---masterflex_460_&_masterflex__460__pu_primer_part_2_msds.asp 9016-87-9
resapol_com---masterflex_700_curative_msds.asp 1313-13-9 137-26-8 1310-73-2
resapol_com---masterflow_648_cp_plus_reactor._msds.asp 112-57-2 90-72-2 90640-67-8
resapol_com---masterkure_181_msds.asp 64742-82-1 1330-20-7 95-63-6
resapol_com---masterkure_191_msds.asp 64742-82-1 95-63-6
resapol_com---masterseal_300_zr_msds.asp 108-94-1 64742-82-1 108-65-6
resapol_com---mastertop_primer_616__part_b_msds.asp 68131-73-7 90-72-2
resapol_com---mbrace_carbon_fibre_laminate_all_grades_msds.asp N/A
resapol_com---mbrace_kevlar_laminate_msds.asp N/A
resapol_com---mbrace_laminate_adhesive_ht65_part_b_hardener_msds.asp 100-51-6 109-55-7
resapol_com---ocr_msds.asp 65997-15-1
resapol_com---pozzolith_100_xr_msds.asp 132-27-4
resapol_com---pozzolith_300n_msds.asp N/A
resapol_com---pozzolith_324n_msds.asp N/A
resapol_com---pozzolith_555__msds.asp 540-72-7
resapol_com---pozzolith_ld_34_msds.asp 111-42-2 50-00-0
resapol_com---preformed_msds.asp N/A
resapol_com---retread_c_in-depth_msds.asp N/A
resapol_com---rheobuild_1000_msds.asp N/A
resapol_com---rheobuild_2000m_msds.asp N/A
resapol_com---rheobuild_2001_b_msds.asp N/A
resapol_com---rheobuild_561_msds.asp N/A

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC