Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

64742-82-1
822-06-0

File Name: resapol_com---lock_coat_msds.asp
                                               SAFETY DATA SHEET
LOCK COAT


1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY

PRODUCT NAME: LOCK COAT

PART No.: F122876

SUPPLIER: MBT Feb
Albany House
Swinton Hall Road
Swinton Manchester M27 4DT
TEL: (+44) 161 794 7411
FAX: (+44) 161 727 8547



2 COMPOSITION/INFORMATION ON INGREDIENTS

INGREDIENT NAME EINECS CAS No. CONTENTS SYMBOL RISK
No. (R No.)
WHITE SPIRIT 64742-82-1 0-1 % Xn, N 10, 51/53, 65, 51/53
ALIPHATIC POLYISOCYANATE 60-100 % Xi 43
HEXAMETHYLENE DIISOCYANATE 212-485-8 822-06-0 0-1 % T 23, 36/37/38, 42/43

The full text for all R-phrases are shown in section 16.

COMPOSITION COMMENTS: Aliphatic polyurethane


3 HAZARDS IDENTIFICATION

May cause sensitisation by skin contact.


4 FIRST AID MEASURES

INHALATION: Move the exposed person to fresh air at once. Provide fresh air, warmth and rest,
preferably in a comfortable upright sitting position. Get medical attention if any discomfort
continues. Treatment is symptomatic for primary irritation or bronchospasm
INGESTION: DO NOT INDUCE VOMITING! NEVER MAKE AN UNCONSCIOUS PERSON VOMIT OR DRINK
FLUIDS! Rinse mouth thoroughly. Promptly get affected personnel to drink large volumes of
water to dilute the swallowed chemical. Obtain medical advice Provide rest, warmth and
fresh air.
SKIN: Remove affected person from source of contamination. Get medical attention promptly if
symptoms occur after washing.

EYES: Remove victim immediately from source of exposure.
Make sure to remove any contact lenses from the eyes before rinsing. Promptly wash
eyes with plenty of water while lifting the eye lids. Continue to rinse for at least 15 minutes
and get medical attention.




Page 1 / 4 >>>
LOCK COAT

5 FIRE FIGHTING MEASURES

EXTINGUISHING MEDIA: Use extinguishing media appropriate for surrounding fire.



6 ACCIDENTAL RELEASE MEASURES

PRECAUTIONS TO PROTECT ENVIRONMENT:
Avoid subsoil penetration. Prevent product from entering drains. Do not contaminate surface
water.
SPILL CLEANUP METHODS: Wear necessary protective equipment. Test for MDI vapour ABSORB. Absorb with inert,
damp, noncombustible material, then flush area with decontaminate. Absorb small quantities
with paper towels and evaporate in safe place (fume hood). Allow sufficient time for
vapours to completely clear the hood ducts, then burn the paper in a location away from
combustible materials.


7 HANDLING AND STORAGE

USAGE PRECAUTIONS: Avoid spilling, skin and eye contact. Ventilate well, avoid breathing vapours. Use approved
respirator if air contamination is above accepted level.

STORAGE PRECAUTIONS: Keep in cool, dry, ventilated storage and closed containers.


8 EXPOSURE CONTROLS AND PERSONAL PROTECTION

INGREDIENT NAME CAS No STD LT EXP ST EXP
(8 hrs) (15 min)
WHITE SPIRIT 64742-82-1 100 ppm 125 ppm
HEXAMETHYLENE DIISOCYANATE 822-06-0 MEL 0.02 mg/m3(Sen) 0.07 mg/m3(Sen)

INGREDIENT COMMENTS: OES = Occupational Exposure Standard.

PROTECTIVE EQUIPMENT:




VENTILATION: Provide adequate general and local exhaust ventilation.
RESPIRATORS: No specific recommendation made, but respiratory protection must be used if the general
level exceeds the Occupational Exposure Level (OEL).
PROTECTIVE GLOVES: Use full length gloves.
EYE PROTECTION: Wear approved chemical safety goggles where eye exposure is reasonably probable.
OTHER PROTECTION: Wear appropriate clothing to prevent any possibility of liquid contact and repeated or
prolonged vapour contact.

HYGIENIC WORK ROUTINES: Wash at the end of each work shift and before eating, smoking and using the toilet.
Promptly remove any clothing that becomes contaminated. Wash promptly with soap &
water if skin becomes contaminated. Use appropriate skin cream to prevent drying of skin.
No eating or drinking while working with this material. DO NOT SMOKE IN WORK AREA!


9 PHYSICAL AND CHEMICAL PROPERTIES

APPEARANCE: Viscous. Liquid.



Page 2 / 4 >>>
LOCK COAT
COLOUR: Colourless. ODOUR/TASTE: Earthy
SOLUBILITY DESCRIPTION: Soluble in water.


10 STABILITY AND REACTIVITY

STABILITY: Normally stable.
CONDITIONS TO AVOID: Avoid heat, flames and other sources of ignition.

MATERIALS TO AVOID: Strong acids.

HAZARDOUS DECOMPOSITION PRODUCTS:
Reaction with water (moisture) produces CO2 Gas. Exothermeric reaction with materials
containing active hydrogen groups.


11 TOXICOLOGICAL INFORMATION

HEALTH WARNINGS: This chemical may cause skin/eye irritation. Prolonged exposure to the preparation may
cause serious health effects. Prolonged exposure to the preparation may cause serious
respiratory sensitisation. Symptoms may include irritation to the eyes, nose, throat and
lungs, possibly combined with dryness of the throat, tighness of chest and difficulty in
breathing. The on-set of the respiratory symptoms may be delayed for several hours after
exposure.
TARGET ORGANS: Skin. Eyes. Respiratory system, lungs.


12 ECOLOGICAL INFORMATION

DEGRADABILITY: Will react with water to produce inert and non-biodegradeable solids


13 DISPOSAL CONSIDERATIONS

DISPOSAL METHODS: Dispose of in accordance with Local Authority requirements.


14 TRANSPORT INFORMATION

ROAD:
ROAD TRANSPORT NOTES: Product not classified as dangerous goods under any transport regulations

RAIL:
RAIL TRANSPORT NOTES: Product not classified as dangerous goods under any transport regulation

SEA:
AIR:
AIR TRANSPORT NOTES: Product not classified as dangerous goods under any transport regulations


15 REGULATORY INFORMATION

LABEL FOR SUPPLY:




Page 3 / 4 >>>
LOCK COAT
RISK PHRASES: R-43 May cause sensitisation by skin contact.

SAFETY PHRASES: S-24 Avoid contact with skin.
S-37 Wear suitable gloves.
P-4 Contains isocyanates. See information supplied by the
manufacturer.
S-60 This material and its container must be disposed of as hazardous
waste.

UK ENVIRONMENTAL LISTINGS: Rivers (Prevention of Pollution) Act 1961.
Control of Pollution (Special Waste Regulations) Act 1980.

EC DIRECTIVES: System of specific information relating to Dangerous Preparations. 91\155.
APPROVED CODE OF PRACTICE: Classification and Labelling of Substances and Preparations Dangerous for Supply.

GUIDANCE NOTES: Occupational Exposure Limits EH40.
Introduction to Local Exhaust Ventilation HS(G)37.
CHIP for everyone HSG(108).


16 OTHER INFORMATION

INFORMATION SOURCES: Dangerous Properties of Industrial Materials Report, N.Sax et.al.
REVISION DATE: 01/10/01
REVISION No. /REPLACES SDS ISSUED:
Issue 1
SDS No.: SDS0307
R-PHRASES (Full Text): R-10 Flammable.
R-23 Toxic by inhalation.
R-43 May cause sensitisation by skin contact.
R-36/37/38 Irritating to eyes, respiratory system and skin.
R-42/43 May cause sensitisation by inhalation and skin contact.
R-51/53 Toxic to aquatic organisms, may cause long-term adverse effects in
the aquatic environment.
R-65 Harmful: may cause lung damage if swallowed.




Page 4 / 4

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
resapol_com---aquaseal_firmafix_roof_felt_adhesive_msds.asp 64742-82-1
resapol_com---aquaseal_hyband_self_adhesive_flashing_tape_msds.asp N/A
resapol_com---aquaseal_hyprufe_damp_proof_liquid_membrane_msds.asp N/A
resapol_com---aquaseal_instant_roof_repair_mastic_msds.asp N/A
resapol_com---aquaseal_protective_black_bitumen_paint_msds.asp 64742-82-1
resapol_com---aquaseal_solvent_free_roof_waterproofer_msds.asp N/A
resapol_com---bitucrete_colpatch_msds.asp N/A
resapol_com---bitutex_msds.asp 8008-20-6
resapol_com---delvocrete_stabiliser_10_msds.asp 6419-19-8 5949-29-1
resapol_com---febclear_super_masterkure_121_msds.asp 64742-82-1 1330-20-7 95-63-6
resapol_com---febguard_epoxy_mortar_base_msds.asp 25085-99-8 28064-14-4 68081-84-5
resapol_com---febguard_epoxy_mortar_part_b_hardener_msds.asp 2855-13-2 100-51-6 25154-52-3
resapol_com---febmix_admix_msds.asp N/A
resapol_com---febond_pva_msds.asp N/A
resapol_com---febond_sbr_msds.asp N/A
resapol_com---febplate_s_base_msds.asp 25085-99-8 2461-15-6
resapol_com---febproof_plus_msds.asp 1310-73-2 1344-09-8
resapol_com---febset_nf_hardener_msds.asp 1761-71-3 1477-55-0
resapol_com---febspeed_msds.asp N/A
resapol_com---feb_fire_cement_msds.asp 1344-09-8
resapol_com---feb_unifil_msds.asp 65997-15-1
resapol_com---glenium_51_msds.asp N/A
resapol_com---glenium_ace_30_msds.asp N/A
resapol_com---glenium_stream_5_msds.asp N/A
resapol_com---leopave_msds.asp N/A
resapol_com---leoseal_msds.asp N/A
resapol_com---leotak_colbond_msds.asp N/A
resapol_com---lock_coat_msds.asp 64742-82-1 822-06-0
resapol_com---masterflex_460_&_masterflex__460__pu_primer_part_2_msds.asp 9016-87-9
resapol_com---masterflex_700_curative_msds.asp 1313-13-9 137-26-8 1310-73-2
resapol_com---masterflow_648_cp_plus_reactor._msds.asp 112-57-2 90-72-2 90640-67-8
resapol_com---masterkure_181_msds.asp 64742-82-1 1330-20-7 95-63-6
resapol_com---masterkure_191_msds.asp 64742-82-1 95-63-6
resapol_com---masterseal_300_zr_msds.asp 108-94-1 64742-82-1 108-65-6
resapol_com---mastertop_primer_616__part_b_msds.asp 68131-73-7 90-72-2
resapol_com---mbrace_carbon_fibre_laminate_all_grades_msds.asp N/A
resapol_com---mbrace_kevlar_laminate_msds.asp N/A
resapol_com---mbrace_laminate_adhesive_ht65_part_b_hardener_msds.asp 100-51-6 109-55-7
resapol_com---ocr_msds.asp 65997-15-1
resapol_com---pozzolith_100_xr_msds.asp 132-27-4
resapol_com---pozzolith_300n_msds.asp N/A
resapol_com---pozzolith_324n_msds.asp N/A
resapol_com---pozzolith_555__msds.asp 540-72-7
resapol_com---pozzolith_ld_34_msds.asp 111-42-2 50-00-0
resapol_com---preformed_msds.asp N/A
resapol_com---retread_c_in-depth_msds.asp N/A
resapol_com---rheobuild_1000_msds.asp N/A
resapol_com---rheobuild_2000m_msds.asp N/A
resapol_com---rheobuild_2001_b_msds.asp N/A
resapol_com---rheobuild_561_msds.asp N/A

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC