Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

108-94-1
64742-82-1
108-65-6

File Name: resapol_com---masterseal_300_zr_msds.asp
                                                 SAFETY DATA SHEET
MASTERSEAL 300 ZR


1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY

MASTERSEAL 300 ZR
PRODUCT NAME:

BIP030
PART No.:

MBT Feb
SUPPLIER:
Albany House
Swinton Hall Road
Swinton Manchester M27 4DT
(+44) 161 794 7411
TEL:
(+44) 161 727 8547
FAX:



2 COMPOSITION/INFORMATION ON INGREDIENTS

INGREDIENT NAME EINECS CAS No. CONTENTS SYMBOL RISK
No. (R No.)
CYCLOHEXANONE 203-631-1 108-94-1 1-5 % Xn 10, 20
WHITE SPIRIT 64742-82-1 1-5 % Xn, N 10, 51/53, 65
2-METHOXY-1-METHYLETHYL ACETATE 203-603-9 108-65-6 10-30 % Xi 10, 36

The full text for all R-phrases are shown in section 16.

One component product based zinc dispersion in epoxy resin dissolved in mixed organic
COMPOSITION COMMENTS:
solvents



3 HAZARDS IDENTIFICATION

Irritating to eyes.
Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment.


4 FIRST AID MEASURES

Move the exposed person to fresh air at once. Provide fresh air, warmth and rest, preferably
INHALATION:
in a comfortable upright sitting position. Get medical attention if any discomfort continues.
DO NOT INDUCE VOMITING! NEVER MAKE AN UNCONSCIOUS PERSON VOMIT OR
INGESTION:
DRINK FLUIDS! Rinse mouth thoroughly. Promptly get affected personnel to drink large
volumes of water to dilute the swallowed chemical. Obtain medical advice Provide rest,
warmth and fresh air.
Remove affected person from source of contamination. Promptly wash contaminated skin
SKIN:
with soap or mild detergent and water. Promptly remove clothing if soaked through and wash
as above. Get medical attention if irritation persists after washing.

Make sure to remove any contact lenses from the eyes before rinsing. Promptly wash eyes
EYES:
with plenty of water while lifting the eye lids. Continue to rinse for at least 15 minutes and get
medical attention.




Page 1 / 4 >>>
MASTERSEAL 300 ZR

5 FIRE FIGHTING MEASURES

Fire can be extinguished using: Foam. Carbon dioxide (CO2). Dry chemicals, sand, dolomite
EXTINGUISHING MEDIA:
etc.

SPECIAL FIRE FIGHTING PROCEDURES:
Cool containers exposed to flames with water until well after the fire is out.



6 ACCIDENTAL RELEASE MEASURES

PRECAUTIONS TO PROTECT ENVIRONMENT:
Avoid subsoil penetration. Prevent product from entering drains. Do not contaminate surface
water.
Wear necessary protective equipment. Extinguish all ignition sources. Avoid sparks, flames,
SPILL CLEANUP METHODS:
heat and smoking. Ventilate. Do not contaminate water sources or sewer. Absorb in
vermiculite, dry sand or earth and place into containers. Avoid breathing vapour


7 HANDLING AND STORAGE

Keep away from heat, sparks and open flame. Avoid spilling, skin and eye contact.
USAGE PRECAUTIONS:
Keep in cool, dry, ventilated storage and closed containers.
STORAGE PRECAUTIONS:


8 EXPOSURE CONTROLS AND PERSONAL PROTECTION

INGREDIENT NAME CAS No STD LT EXP ST EXP
(8 hrs) (15 min)
CYCLOHEXANONE 108-94-1 OES 10 ppm(Sk) 20 ppm(Sk)
WHITE SPIRIT 64742-82-1 100 ppm 125 ppm
2-METHOXY-1-METHYLETHYL ACETATE 108-65-6 No std. No std.


PROTECTIVE EQUIPMENT:




Use protective gloves. or gauntlets if risk of skin contact
PROTECTIVE GLOVES:
Wear appropriate clothing to prevent any possibility of liquid contact and repeated or
OTHER PROTECTION:
prolonged vapour contact.

Wash at the end of each work shift and before eating, smoking and using the toilet. Wash
HYGIENIC WORK ROUTINES:
promptly with soap & water if skin becomes contaminated. Promptly remove any clothing that
becomes contaminated. Use appropriate skin cream to prevent drying of skin. No eating or
drinking while working with this material. DO NOT SMOKE IN WORK AREA!


9 PHYSICAL AND CHEMICAL PROPERTIES

Liquid. Colourless.
APPEARANCE: COLOUR:
Organic Solvent
ODOUR/TASTE:
Immiscible with water.
SOLUBILITY DESCRIPTION:
MORE THAN - 7 cSt @ 40 掳C >32掳C
VISCOSITY: FLASH POINT (掳C):
CC (Closed cup).
FLASH POINT METHOD:



Page 2 / 4 >>>
MASTERSEAL 300 ZR

10 STABILITY AND REACTIVITY

Normally stable.
STABILITY:
Avoid heat. Avoid contact with acids and oxidising substances.
CONDITIONS TO AVOID:
HAZARDOUS DECOMPOSITION PRODUCTS:
Fire creates: Vapours/gases/fumes of: Carbon monoxide (CO). Carbon dioxide (CO2).


11 TOXICOLOGICAL INFORMATION

May cause irritation to the respiratory system. and lung damage
INHALATION:
May cause discomfort if swallowed.
INGESTION:
Acts as a defatting agent on skin. May cause cracking of skin, and eczema.
SKIN:
Spray and vapour in the eyes may cause irritation and smarting.
EYES:


12 ECOLOGICAL INFORMATION

Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic
ENVIRONMENTAL HAZARDS:
environment. Can be expected to biodegrade slowly


13 DISPOSAL CONSIDERATIONS

Dispose of in accordance with Local Authority requirements.
DISPOSAL METHODS:


14 TRANSPORT INFORMATION

LABEL FOR CONVEYANCE:




ROAD:
1263
UN No:
Class 3: Flammable liquids. 3
HAZARD CLASS (ADR): ADR CLASS No:
31 (c) 30
ADR ITEM No: HAZARD No. (ADR):
2301 3
MARGINAL: ADR LABEL No:
30G80 30G36
HAZCHEM CODE: CEFIC TEC(R) No:

RAIL:
3 31 (c)
RAIL TRANSPORT CLASS No: RAILROAD PT:

SEA:
1263 Class 3
UN SEA: SEA TRANSPORT CLASS No:
3372 III
IMDG Page No: SEA PACK GR:
3-05 310 or 313
EmS No.: MFAG Table No:
No.
MARINE POLLUTANT:

AIR:
1263 3
UN AIR: AIR TRANSPORT CLASS No:
III
AIR PACK GR:




Page 3 / 4 >>>
MASTERSEAL 300 ZR

15 REGULATORY INFORMATION

LABEL FOR SUPPLY:




R-36 Irritating to eyes.
RISK PHRASES:
R-52/53 Harmful to aquatic organisms, may cause long-term adverse effects in
the aquatic environment.

S-25 Avoid contact with eyes.
SAFETY PHRASES:
S-26 In case of contact with eyes, rinse immediately with plenty of water and
seek medical advice.
S-60 This material and its container must be disposed of as hazardous
waste.

Classification and Labelling of Substances and Preparations Dangerous for Supply.
APPROVED CODE OF PRACTICE:

Occupational Exposure Limits EH40.
GUIDANCE NOTES:
Introduction to Local Exhaust Ventilation HS(G)37.
CHIP for everyone HSG(108).


16 OTHER INFORMATION

Dangerous Properties of Industrial Materials Report, N.Sax et.al.
INFORMATION SOURCES:
01/10/01
REVISION DATE:
REVISION No. /REPLACES SDS ISSUED:
Issue 1
SDS0172
SDS No.:
R-10 Flammable.
R-PHRASES (Full Text):
R-20 Harmful by inhalation.
R-36 Irritating to eyes.
R-51/53 Toxic to aquatic organisms, may cause long-term adverse effects in
the aquatic environment.
R-65 Harmful: may cause lung damage if swallowed.




Page 4 / 4

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
resapol_com---aquaseal_firmafix_roof_felt_adhesive_msds.asp 64742-82-1
resapol_com---aquaseal_hyband_self_adhesive_flashing_tape_msds.asp N/A
resapol_com---aquaseal_hyprufe_damp_proof_liquid_membrane_msds.asp N/A
resapol_com---aquaseal_instant_roof_repair_mastic_msds.asp N/A
resapol_com---aquaseal_protective_black_bitumen_paint_msds.asp 64742-82-1
resapol_com---aquaseal_solvent_free_roof_waterproofer_msds.asp N/A
resapol_com---bitucrete_colpatch_msds.asp N/A
resapol_com---bitutex_msds.asp 8008-20-6
resapol_com---delvocrete_stabiliser_10_msds.asp 6419-19-8 5949-29-1
resapol_com---febclear_super_masterkure_121_msds.asp 64742-82-1 1330-20-7 95-63-6
resapol_com---febguard_epoxy_mortar_base_msds.asp 25085-99-8 28064-14-4 68081-84-5
resapol_com---febguard_epoxy_mortar_part_b_hardener_msds.asp 2855-13-2 100-51-6 25154-52-3
resapol_com---febmix_admix_msds.asp N/A
resapol_com---febond_pva_msds.asp N/A
resapol_com---febond_sbr_msds.asp N/A
resapol_com---febplate_s_base_msds.asp 25085-99-8 2461-15-6
resapol_com---febproof_plus_msds.asp 1310-73-2 1344-09-8
resapol_com---febset_nf_hardener_msds.asp 1761-71-3 1477-55-0
resapol_com---febspeed_msds.asp N/A
resapol_com---feb_fire_cement_msds.asp 1344-09-8
resapol_com---feb_unifil_msds.asp 65997-15-1
resapol_com---glenium_51_msds.asp N/A
resapol_com---glenium_ace_30_msds.asp N/A
resapol_com---glenium_stream_5_msds.asp N/A
resapol_com---leopave_msds.asp N/A
resapol_com---leoseal_msds.asp N/A
resapol_com---leotak_colbond_msds.asp N/A
resapol_com---lock_coat_msds.asp 64742-82-1 822-06-0
resapol_com---masterflex_460_&_masterflex__460__pu_primer_part_2_msds.asp 9016-87-9
resapol_com---masterflex_700_curative_msds.asp 1313-13-9 137-26-8 1310-73-2
resapol_com---masterflow_648_cp_plus_reactor._msds.asp 112-57-2 90-72-2 90640-67-8
resapol_com---masterkure_181_msds.asp 64742-82-1 1330-20-7 95-63-6
resapol_com---masterkure_191_msds.asp 64742-82-1 95-63-6
resapol_com---masterseal_300_zr_msds.asp 108-94-1 64742-82-1 108-65-6
resapol_com---mastertop_primer_616__part_b_msds.asp 68131-73-7 90-72-2
resapol_com---mbrace_carbon_fibre_laminate_all_grades_msds.asp N/A
resapol_com---mbrace_kevlar_laminate_msds.asp N/A
resapol_com---mbrace_laminate_adhesive_ht65_part_b_hardener_msds.asp 100-51-6 109-55-7
resapol_com---ocr_msds.asp 65997-15-1
resapol_com---pozzolith_100_xr_msds.asp 132-27-4
resapol_com---pozzolith_300n_msds.asp N/A
resapol_com---pozzolith_324n_msds.asp N/A
resapol_com---pozzolith_555__msds.asp 540-72-7
resapol_com---pozzolith_ld_34_msds.asp 111-42-2 50-00-0
resapol_com---preformed_msds.asp N/A
resapol_com---retread_c_in-depth_msds.asp N/A
resapol_com---rheobuild_1000_msds.asp N/A
resapol_com---rheobuild_2000m_msds.asp N/A
resapol_com---rheobuild_2001_b_msds.asp N/A
resapol_com---rheobuild_561_msds.asp N/A

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC