technical data sheet
ULTRA NP PRIMER
Two Component Solvent Free Synthetic Resin Based Epoxy Primer
PRODUCT PRIMING
Bostik Ultra NP Primer is a two component solvent free Prime clean dust free concrete substrate with Ultra NP
synthetic resin based epoxy primer for non-porous Primer using a brush, broom or roller. Allow primer to dry
surfaces. before applying Ultralevel levelling compound. Primer will
dry in approximately 2-3 hours depending on substrate and
air temperature.
DESCRIPTION
Ultra NP Primer is a high performance two component
Apply primer at 6-10m2/litre per coat depending on
synthetic resin based epoxy primer specially for use on
substrate conditions.
non-porous substrates. Ultra NP Primer provides a good
DO NOT APPLY ULTRALEVEL LEVELLING
bond coat aid prior to the application of Ultralevel subfloor
COMPOUND TO UNPRIMED SURFACE.
levelling compounds and thin bed mortars.
Ultra NP Primer is ideal on dense smooth non-porous
Do not allow dust film to cover primed area prior to
substrates.
application of Ultralevel levelling compound.
RECOMMENDED USES
MIXING
鈥? Primer and bonding agents on very dense, smooth
Ultra NP Primer is supplied in a kit consisting of 2 litre of
surfaces.
Part A and 2 litres of Part B.
鈥? For use as a primer on ceramic tiles, dense concrete,
Mix Part A & Part B thoroughly following the mixing ration
terrazzo, wood, metal surfaces, plastic and most
of 1:1 by weight or volume until a uniform green
coatings.
consistency is obtained.
Mix can be applied immediately and is workable for up to
FEATURES & BENEFITS
50 minutes at 20掳C.
鈥? High bond and adhesive strength.
鈥? Convenient 1:1 mix ratio.
PRECAUTION
鈥? Fast drying, tack off time.
鈥? Avoid extend exposure to skin as it may be difficult to
鈥? High performance.
remove once dried.
鈥? Solvent free.
鈥? Do not dilute.
鈥? Adheres to most surfaces.
鈥? Discard any material which has exceeded the pot life
鈥? Non flammable
or working time of the product.
PACKAGING P.A.T.S (Pretested Adhesion To Substrate)
Ultra NP Primer is supplied 4litre kit.
Programme
Bostik offer a service in which a program has been
COVERAGE
established to eliminate potential field problems by pre-
2
1 Litre of Ultra NP Primer will cover approximately 6-10m
testing Bostik adhesives with samples of building materials
per litre per coat. Depending upon the porosity of the
to which the adhesive will be applied. This service is
substrate. Apply a thin even coat of Ultra NP Primer over
available on large projects where pre-application testing
the required surface ensuring a uniform film.
will aid in determining the proper surface preparation
method to achieve optimum adhesion. Consult a Bostik
APPLICATION INSTRUCTIONS representative for further information.
Substrate and Surface Preparation
Ensure the concrete substrate is clean and free from oil,
HEALTH AND SAFETY
grease, sealers, curing compounds, paints, polymer
鈥? Gloves and protective goggles must be worn during
coatings, dust or other foreign (bond breaking) matter.
application and use.
Excess bitumen, adhesive or laitance should be removed
鈥? Avoid contact with skin, eyes and avoid breathing in
by light scabbling or mechanical captive shot blasting.
vapour.
Followed by vacuuming to remove debris and dust. Large
鈥? May cause sensitisation by skin contact.
cracks or holes may be filled using equal parts of Ultralevel
鈥? In case of contact with eyes rinse immediately with
levelling compound and clean fine sand made up to a
plenty of water and consult medical advice.
trowellable consistency. Ensure the substrate is primed
鈥? If skin contact occurs, remove contaminated clothing
with Ultra NP Primer prior to carrying out application.
and wash skin thoroughly with soap and water for a
minimum of 15 minutes.
1
鈥? STORAGE
If poisoning occurs, contact a doctor or Poisons
Information Centre. Ultra NP Primer has a shelf life of 12 months if kept in a
鈥? In case of spill or leak, contain the spill with absorbent cool, dry environment completely away from moisture.
material (vermiculitre or sand). Collect split material
into labeled container. Use water mist, foam, carbon FIRE
dioxide or dry powder (in this order of preference) to In case of spill or leak, contain the spill with absorbent
put out the fire. material (vermiculitre or sand). Collect split material into
鈥? For more detailed information refer to Material Safety labeled container. Use water mist, foam, carbon dioxide or
Data Sheet. dry powder (in this order of preference) to put out the fire.
CLEAN-UP
Wash all equipment in water or water/detergent ITEM NO. STOCK SIZE COLOUR
immediately on completion of application and mixing. 287032 4 Litres Green
Primer NP will cure under water, hence ensure dirty
equipment is not left soaking in water.
The representations and recommendations regarding the products are based on tests which we believe to be reliable. However, no guarantee
of their accuracy can be made because of the great range of field conditions and variations encountered in raw materials, manufacturing
equipment and methods. Thus, the products are sold with a limited warranty only, and on the condition that purchasers will make their own
tests to determine the suitability of the product for their particular purposes. Under no circumstances will Bostik Australia Pty Ltd be liable to
anyone except for replacement of the products or refund of the purchase price.
ALL SALES ARE EXPRESSLY LIMITED TO THE TERMS AND CONDITIONS OF SALE OF BOSTIK AUSTRALIA PTY LTD
FOR FURTHER INFORMATION
BOSTIK BOSTIK BOSTIK BOSTIK
AUSTRALIA PTY LTD NZ LIMITED SINGAPORE PTE LTD (MALAYSIA) SDN BHD
Phone: +61-3-9279 9333 Phone: +64-4-567 5119 Phone: +65-6863 4088 Phone: +606 678 9788
Fax: +61-3-9279 9240 Fax: +64-4-567-5412 Fax: +65-6863 4077 Fax: +606 678 9766
Product: Ultra NP Primer
SYDNEY ADELAIDE PERTH BRISBANE Issue Date: July 2004
Phone: 02 8825 3488 Phone: 08 8244 0511 Phone: 08 9331 7666 Phone: 07 3265 2377 Issue No: 2
Division: Bulding Products
Fax: 02 8825 3411 Fax: 08 8244 0522 Fax: 08 9331 7677 Fax: 07 3265 5421 Total Pages: 2
(ABN 79 003 893 838)
2
|